1st November 1941, Page: 133, Column: 1
Advantages of Remote Control
In a discussion on Hand Control v. Remote Control for Face Machinery, before
the Midland branch of the Association of Mining Electrical Engineers, Mr. S. Orme,
in support of remote control, summarised the advantages of the latter
as follows : (1) Standardisation. All control breakers can be interchangeable
with each other. (2) Reliability. The control gear may be depended upon to
function over longer periods without attention. (3) Simplicity of Maintenance.
It is much easier to examine a switch at the gate-end where there is room to do
so rather than at the coal face where there are numerous obstructions. The
higher standard of reliability with remote-control enables us to choose an
opportune moment to make an examination. This is not always possible with
hand-control where the chief worry is the state of the contacts, and whether
they will continue to give service until they can be examined and, if
necessary, changed. (4) Flexibility of Control. This is an operational benefit
and means that the machine can be put in the most effective place, and the
control in the most convenient one.
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Orme, S. | | | |