9th August 1941, Page: 37, Column: 2
Liquefaction Of Coal
In the introduction to Technical Paper 622 of the U.S. Bureau of Mines on
"Hydrogenation and Liquefaction of Coal" the authors say the
essential chemical differences between bituminous coal and petroleum are
— the ratio of the number of carbon atoms to hydrogen atoms (which is
about 1.2 for bituminous coal and 0.6 for petroleum) ; the much lower oxygen,
nitrogen, and sulphur content of petroleum ; and the lower molecular weight of
the petroleum constituents. Therefore, to produce a petroleum-like material it
is necessary approximately to double the hydrogen atoms in bituminous coal, to
remove virtually all the oxygen, nitrogen and sulphur, and to dissociate or
"crack" the coal molecules until their molecular weight about equals
that of petroleum molecules. In 1913 Dr. F. Bergius discovered that it
is possible to add hydrogen to "cracked" coal molecules by working at
about 450°C. and 200 atmospheres pressure of hydrogen. Under these
conditions nearly all the oxygen in the coal was eliminated as water, most of
the nitrogen as ammonia, and most of the sulphur as hydrogen sulphide. The
product was a liquid similar to petroleum. Subsequently the I. G.
Farbenindustrie A. G. (a large chemical corporation in Germany) developed
contact catalysts that increased the speed of the addition of hydrogen to the
cracked coal. A period of rapid industrial application of the process in
Germany followed development of these catalysts, and between 1925 and 1939
several huge coal-hydrogenation plants were erected ; these are now producing
more than 1,000,000 tons of gasoline a year from coal. There were similar,
albeit smaller, developments in other countries. The plant at Billingham, which
was begun in 1935, has a capacity of about 150,000 tons of gasoline a year. The
Japanese pilot plants have a total capacity of about 60,000 tons of gasoline
per year.
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Bergius, F., Dr. | | | |