21st July 1941, Page: 2, Column: 6
Shotton Board's Proposal
"Tail-Gates" In Mines
Shotton District Workmen's
Mines Inspection Board's
request for a minimum height
and width for "tail gates" in
mines, is being considered by the
National Mining Commission. This
was disclosed at the annual meeting
of the Board held on Saturday
afternoon at Deaf Hill Miners'
Institute, when Mr. C. Newton
(secretary) reported the receipt of
a letter from Durham Miners'
Association in reply to the Board's
request for an amendment to
Section 36 of the Coal Mines Act,
1911, to make "tail gates" a
minimum of 8 ft. wide and 4ft. 6in.
high.
The letter stated that the
Board's request is being kept in
mind in drafting the new regulations
and recommendations to be
issued by the National Mining
Commission.
Coun. E. W. Toft, of Murton,
presided.
A letter was read from Wingate
Mechanics' Branch, asking for
information on how to become
members of the Board, and it was
decided to forward the necessary
details.
When Mr. J. Powney (mines
inspector) reported an increase of
six fatal accidents for the year
ended June, 1941, the figure being
20, compared with 14 for the
previous year, several delegates
pointed out the vital need of
vigilance on the part of miners
especially during this time of
increased coal production.
Total number of inspections
carried out during the past
quarter, said Mr. Powney, was 150.
The financial statement,
presented by Mr. F. Watson, of
Easington Colliery (treasurer),
was adopted as satisfactory.
Officers elected for the ensuing
year were:
President, Coun. E. W. Toft (Murton);
secretary, Mr. C. Newton (Shotton);
treasurer, Mr. F. Watson (Easington Colliery);
auditor, Mr. F. Stokoe (Thornley).
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Newton, C. | | Secretary | |
| Powney, J. | | Mines Inspector | |
| Stokoe, F. | | Auditor | |
| Toft, E. W., Councillor | | President | |
| Watson, F. | | Treasurer | |