Logo Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Main Document Archive
Newspaper Articles
Articles by date
Articles by colliery
Personal name index
Local Record Extracts
D.M.A. Document Archive
Transactions of I.M.E.
Miners' Welfare
N.C.B. Archive
The Colliery Engineer
The Colliery Guardian
Mine & Quarry Engineering
Mining Journal
The Science and Art of Mining
Coal Magazine
Coal News
Coke and Gas
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious


 Newspaper Articles Index Newspaper Articles 

31st May 1941, Page: 373, Column: 2

Steel Arches And Spontaneous Combustion

In their paper on "Prevention of Spontaneous Combustion by the Use of Steel Arches as Road Supports," read before the Midland Institute of Engineers, Messrs. D. MacGregor and S. J. Temperley said that the reduction in spontaneous combustion in the Barnsley seam at the colliery to which the paper refers, has been achieved over a period during which the method of working the seam has remained unaltered except for the use of steel arches as road supports ; also the workings have continued during the period in similar conditions of strata. Therefore they can, with a certain amount of confidence, point to steel arches used for road supports being a factor which has brought about a reduction in spontaneous combustion.

The seam, which lies at a depth of 625 to 710 yards, consists of 4½ to 5½ feet of coal containing hards and softs, then a band of soft dirt varying from 3 to over 12 inches thick, with Top Softs (coal) above measuring 3 to 4 feet thick ; above the Top Softs there is 1½ to 3 feet of clunch and above that 1½ to 2 feet of coal (day beds). The method of working is by advancing longwall, with the line of face 30 to 40 degrees off bord. The coal is hand got, and filled into tubs on the face.

It is about eight years since the arches were applied in the manner outlined in the paper, and there has happily been a substantial reduction in spontaneous combustion heatings throughout the pit, on the sides of working roadways, in old roadways after they have been sealed, and of heating in the gob. In the Authors' opinion this is due to (1) better control of side movement, (2) the reduced height of sides exposed, particularly during the period of extensive roof movement, thus reducing the formation of breaks across and over the sides, (3) the use of arches backed with sheeting and sand at places where falls have occurred, and (4) the increased effectiveness of stoppings to seal old roadways. Whilst the paper gives experience of the use of arches in reducing the liability of spontaneous combustion, it is desired to emphasise that their use does not justify any relaxation in other precautions connected with the prevention and control of spontaneous combustion.


Names mentioned in this article

 

 Name  Age  Occupation  Notes 
MacGregor, D.      
Temperley, Samuel Jarrett      Whos Who Page


 

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 28 Nov 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print