19th April 1941, Page: 328, Column: 1
Coals for Mechanical Stoking
In a paper before the Institute of Fuel on "How Far is the Proximate
Analysis a Reliable Guide to Coal Behaviour," Mr. J. G. Bennett of
the British Coal Utilisation Research Association said : There are really no
tests of the suitability of coals for mechanical stoking except actual trial in
a boiler or furnace. The result is that the makers of mechanical firing
equipment are very largely dependent on the specialised experience of their own
combustion engineers to help their clients in the selection of plant and fuels.
Small underfeed stokers already tax to the limit the knowledge and experience
of engineers, and no one would seriously think of relying on proximate analysis
to decide whether a given coal was suitable for such stokers or not. The same
to a great extent applies to the large multiple-retort stokers used to fire
some of the most important power-station boilers in this country. These and
similar appliances which represent the endeavour to attain the maximum possible
efficiency and output from heat utilising plant make it increasingly necessary
to know more about coals than the proximate analysis can tell us. We have in
recent years put a great deal of work into the improvement of analytical
methods without asking ourselves enough about the interpretation of the
results.
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Bennett, J. G. | | British Coal Utilisation Research Association | |