19th October 1940, Page: 116, Column: 2
Engineering For Safety
Importance of Education.
Our excellent contemporary, the Canadian Mining Journal, is running a special
safety feature, and in the September issue presents a paper by G. S. Jarrett,
the general safety engineer of the International Nickel Company of
Canada, on the subject of "Engineering for Safety." The writer
outlines ways in which safety may be built into the production programme, and
emphasises the fact that safety and production must be intimately associated
together in mind and effort, dealing with the problem under six headings :
Organisation, co-operation, education, construction, inspection and protection.
He affirms that every man has an indisputable right to a safe working place,
and that it is the responsibility of the management to do all in its power to
provide him with it. Compensation, no matter how generous, can never ease the
suffering of an injured workman, nor can an award repay the misery occasioned
by the loss of a loved one.
Under the third heading, i.e., Education, Mr. Jarrett says that every
well balanced educational programme must be such that it includes both foremen
and men ; and it is always well to bear in mind that the outlook, reactions and
dispositions of the two groups are in most cases quite different. Foremen's
meetings are undoubtedly the best source of contact with the supervising staff.
At these meetings a definite period should be set aside for discussing new
methods and reviewing accepted practice and regulations. Meetings for the men
at which the superintendent, the foremen and the safety engineers may instruct
the force, have proven their worth. At these meetings the men may be grouped by
shifts or by occupations depending upon the nature of the work in hand. To
facilitate a scheme of this nature it is essential that a text be prepared
setting out accepted procedure for every part of the operation which will act
as a record and reference book.
Nickel Company's Scheme.
In this connection it may be of interest to recount briefly the work of the
International Nickel Company. The scheme had its beginning in 1931 at the Frood
Mine. Inasmuch as the method of mining which was being adopted was new to the
men and to many of the foremen, it was felt that a logical and systematic
standardisation of every operation should be developed together with an
organisation by which it would be possible to instruct all men in the actual
performance of their individual tasks. Now all mines and plants in the
organisation have developed their "Standard Practices" which must be
added to, altered and revised from time to time. The books are designed to
feature the work in two ways : (1) Various phases of the operation ; (2)
Occupational classification.
Under the former are listed such subjects as "Operation of the
Changehouse," "Handling and Transportation of Explosives,"
"Blasting," "Fire Procedure" and "Dust
Prevention," whereas (2) includes all occupations. While it was necessary
in many instances to point out the pitfalls by the use of negative expressions
such as "do not" and "must not," it was not the intention
to develop a list of safety rules but to devise a detailed code not
inconsistent with Ontario Government Mining Regulations. The benefits derived
by way of selection of preferred methods and standardisation in the compilation
of the books alone were many.
Lecture rooms are provided at the various plants. Here classes are held in
accordance with regular schedules at which superintendents, foremen and safety
engineers take charge at various times. These rooms are equipped with screens
for still or moving picture projection, samples of tools, scale models and
blackboards.
Many features of a mining operation, however, cannot be taught in a class room,
and for these we must depend to a large extent on the direct contact of the
supervision, mainly shift bosses, stope bosses and level bosses. In many of the
larger operations training stopes have been a means of improving the efficiency
and reducing accidents. The apprenticeship idea has proven its worth in
connection with many occupations in mechanical and electrical work, motorised
transportation, hoisting and chute blasting. A studied plan to control the too
rapid advancement of new men, together with a systematic examination of the
knowledge of individuals with regard to the rules and regulations pertaining to
new occupations before they are permitted to assume responsibility, has also
borne fruit.
A good educational programme should also include an adequate poster service
with attractive, well placed display boards for the men and safety literature
for the foremen. First aid training for both men and foremen should not be
overlooked. The value of such knowledge in treating serious injuries and
preventing infections in minor scratches has also proven its worth, to say
nothing of the accident consciousness which it tends to develop.
Mine rescue training is another form of educational work. Owing to its
specialised nature it cannot, of course, be available to all men, and only
recently have facilities been provided in Ontario to train even a limited
number of men at all mines. In the larger centres, however, where the
Department of Mines has established stations, all properties should make full
use of them and maintain a well trained active squad.
Mr. Jarrett concludes by emphasising the importance of the foreman's
position in the organisation from the safety standpoint. As the foreman takes
his cue from the management, so the workman takes his from the foreman. Here,
as everywhere, in safety work actions speak louder than words, and if we fail
in our effort to provide foremen whose actions as well as their words support
the movement to the utmost, our efforts will be in vain.
Sidney J. Williams in his Manual of Industrial Safety sets out the
following qualities which a foreman must possess or acquire to get results in
safety :—
1. He must honestly believe in accident prevention.
2. He must be sincerely interested in the welfare of his men.
3. He must be a leader rather than a driver and must command the confidence of
his men.
4. He must know Safety — what constitutes safe equipment and safe methods
for every job under him.
5. He must be able to instruct his men, especially the new men, and show them
how to do their work properly and safely — not simply tell them to
"be careful."
6. He must be courteous and show appreciation to the man who makes a safety
suggestion; adopt it if practicable, and if not explain the reason why.
7. He must have backbone in the use of discipline where such action is called
for.
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Jarrett, G. S. | | General Safety Engineer | |
| Williams, Sidney J. | | | |