|
21st September 1940, Page: 89, Column: 2 Electrical NotesRegarding the question of eddy currents Dr. Sylvanus Thompson once expressed his view in the following terms : When a dynamo is running a set of entirely new phenomena arises in consequence of the magnetic and electric reactions set up between the armature and the field magnets, and between the separate sections of the armature coils. The current circulating in the armature windings produces magnetising effects which interfere with those of the exciting currents of the field magnet. In addition to these there may also be eddy currents in the masses of the metal which will perturb the magnetic field. The reactions of the running armature manifest themselves in several ways, the most important of which are :— (a) A tendency to cross-magnetise the armature. (b) A tendency to spark at the brushes. (c) Hence the necessity of shifting the brushes through a certain angle to such a point that sparking disappears. (d) A consequent tendency for the armature current to demagnetise. (e) Variations of sparking, and consequently of the neutral points when the amount of current drawn from the machine is altered. (f) Heating of armature cores and coils. (g) Heating of the pole-pieces of the magnets. (h) A consequent discrepancy between the mechanical horsepower imparted to the shaft of the machine and the electric horsepower furnished in the electric circuit. When a current is set up in a wire an electromagnetic field is almost immediately set up in the space surrounding that wire. When an electromagnetic field is set up round a wire a current of electricity is generated in that wire during the setting up of the field, provided, of course, that the wire forms part of a complete circuit. It does not matter whether the source of the field be a permanent magnet, a straight wire, or a wire coiled into many convolutions or turns. All that does matter is that the lines of force shall cut the wire, or that the wire shall be moved so as to cut the lines of force transversely. Discussing the question of the manufacture of the Chloride battery, a writer some time ago interposed the following condensed rules for the proper care of batteries :— A battery must always be charged in the right direction. Be careful to give the right amount of charge, do not undercharge or overcharge to an excessive degree. Do not over discharge. Do not allow a battery to stand completely discharged. Do not allow the battery temperature to exceed 100° Fahr. Keep the electrolyte at the proper specific gravity, and the proper height above the top of the plates. Keep the cells free from dirt and all foreign substances. Keep the battery and all connections clean ; keep the bolted connections tight. If there are any low cells in a battery, do not delay in locating and repairing them. Do not allow sediment to get up to the plates. — P.T.W.
|
|||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 28 Nov 2022
|
Search |
|
|||