24th August 1940, Page: 64, Column: 2
Pulverised Coal Firing
Before the Fuels section of the American Society of Mechanical Engineers
Mr. Ollison Craig, discussing the effect of coal characteristics on pulverised
coal firing, said a general conclusion is that all the advantages are not with
high-volatile coal. Low-volatile coal is more usually friable. This results in
a lower purchase price for equipment, less power to operate, and less expense
for maintaining pulverising equipment. Low-volatile coals average higher in
heat value, so that less weight of coal is required to generate a given amount
of steam. The ash from low-volatile coal usually fuses at a higher temperature,
so that less boiler and furnace maintenance is required and boilers may be kept
in operation longer periods of time. At one period of time coal of certain
characteristics may be the most economical, while at another period coal of
quite different characteristics may be the most economical. By giving proper
consideration to the characteristics of coal or coals most available and most
economical to use, designs can be made which will take advantage of those
characteristics which may be considered good and which will lessen or eliminate
the effect of those which may be considered bad.
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Craig, Ollison | | Mechanical Engineer | |