24th August 1940, Page: 57, Column: 2
Power Cables In Mines
The question of the "Installation of High-tension Power Circuits in Coal
Mines" is discussed by E. J. Gleim in Information Circular 7044 of
the U.S. Bureau of Mines. The author says that in view of the present tendency
to extend high-tension cables along entries and other passageways from the
bottom of the shaft, borehole, or other point of entrance to coal mines rather
than over the surface, it is deemed that the various methods of installing such
cables deserve careful consideration, particularly in mines in which gas and
coal dust contribute to explosion hazards. What might be considered a proper
installation in one mine might prove to be an undesirable one in another mine,
owing to the different conditions to be met. However, in recent years the
construction of cables and methods of installing cables have been improved.
This makes for safer installations.
In placing power cables along mine passageways, Mr. Gleim says that
several important questions must be answered satisfactorily if a safe and
reliable installation is to be assured :—
1. Is the cable likely to be damaged by electrolytic or chemical action of mine
water that may be encountered ?
2. Are the mechanical and electrical characteristics of the cable such that no
injury to a man will be likely to follow his touching it or driving a pick into
it by accident ?
3. Is the cable likely to be damaged by derailed cars, locomotives, or other
moving equipment ?
4. Is the cable likely to be damaged by falling coal, roof, or other material ?
5. Is the cable likely to be damaged by movement of its supports due to heaving
bottom or squeezes ?
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Gleim, E. J. | | U.S. Bureau of Mines | |