27th July 1940, Page: 27, Column: 2
Cars For Transporting Explosives
Under the above caption, the recently issued Information Circular 7115 of the
U.S. Bureau of Mines, by C. W. Owings, informs that safety in
transporting explosives underground is attained best by transporting each type
of explosive separately in specially designed cars. A definite type of car has
not been recommended by the Bureau, but the report gives descriptions of four
cars embracing general principles that have solved the problem for four coal
mining companies.
The Author of the Circular says that an explosives car should consist
essentially of two boxes, so constructed that the inner box is insulated
adequately from electric current, and should be strong enough to withstand more
than normal blows, such as falls of material and similar accidental impact. It
should have doors or lids that can be opened to expose only a part of the load
at one time, and doors should be placed so that they will not come in contact
with electric power wires when opened, and employees cannot stand under
power-carrying wires while loading or unloading explosives. Bumpers should be
prohibited or so constructed that employees cannot ride on the explosives car.
As electric haulage is generally used, insulated couplings should be employed
with this type of transportation, to prevent ignition or detonation of the
explosives by stray currents. Ordinary couplings allow current, created usually
when the locomotive and cars run over poorly bonded track, to pass into the car
through the metallic drawbar. According to the Circular some companies provide
separate compartments in explosives cars to carry detonators, but the Bureau of
Mines believes this practice entails additional and unnecessary danger and does
not recommend this departure from the much safer practice of transporting
different types of explosives and detonators separately.
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Owings, C. W. | | U.S. Bureau of Mines | |