1st June 1940, Page: 373, Column: 2
Testing Dust Extraction Plant
As the industrial areas have developed the number of coal-burning
installations has increased, and this has resulted in the
problem of "Smoke Nuisance" becoming of considerable
importance. Some years ago the Electricity Commission set up
a Committee to enquire fully into the problem in so far as it
affected Electric Power Stations, and in the report that was
subsequently issued by this Committee the view was expressed
that, before the problem could be adequately tackled, it was
essential that there should be agreed standards for: (a) A method
of testing the emission of solids from chimneys. (b) A method
for determining and expressing the size of dust particles. The
task of preparing appropriate Standards was accordingly referred
to the British Standards Institution, and B.S. No. 893 has now
been issued at the price of 5s. (by post 5s. 4d.).
Mr. A. N. East of the Electricity Commission was the chairman
of the Committee responsible for preparing this publication, and
it is evident that a considerable amount of work has been carried
out. Information on the subject which was available in this
and other countries was obtained and examined. Where information
was not available an attempt was made to obtain it by
arranging for the necessary experimental work to be carried out.
Accordingly, the fact that a complete answer to the problem has
not been obtained is due solely to the perplexities of the problem
rather than to a lack of their recognition. It is hoped that the
accumulated experience resulting from the adoption of the
standard methods will provide material that will enable further
progress to be made.
The Standard is in three essential parts as follows: Part 1. —
Method for the determination of the emission of solids from a
chimney; Part 2. — Method for grading the dust by air elutriation;
Part 3. — Descriptions of various forms of sampling tube which
may be used in dust sampling.
A number of diagrams are included in the Standard, and there
is an appendix which deals with the problem of ensuring uniform
and uni-directional flow of flue gases; one of the essentials for
the reliable sampling of a dust-ladened flue gas stream. The
Standard is one which will be of particular interest to all concerned
with fuel combustion.
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| East, A. N. | | Electricity Commission | |