Logo Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Main Document Archive
Newspaper Articles
Articles by date
Articles by colliery
Personal name index
Local Record Extracts
D.M.A. Document Archive
Transactions of I.M.E.
Miners' Welfare
N.C.B. Archive
The Colliery Engineer
The Colliery Guardian
Mine & Quarry Engineering
Mining Journal
The Science and Art of Mining
Coal Magazine
Coal News
Coke and Gas
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious


 Newspaper Articles Index Newspaper Articles 

1st June 1940, Page: 369, Column: 1

Accidents And Their Prevention

These notes are based on the Mines Inspectors' Reports for 1938. The price of each Report is 1s. net. Copies are obtainable through H.M. Stationery Office.

The Coal Dust Problem — II

As stated by Mr. H. J. Humphrys in his report covering Yorkshire, mechanised mining has profoundly influenced the coal dust problem. The output is concentrated in fewer (and sometimes smaller) roads, and larger quantities of air are required to ventilate the more rapidly moving faces. The higher are velocities sweeping over the larger quantities of coal have greatly increased the amount of fine dust on the roads. The hand loader always placed the lumps on the top. The conveyor uses no such discrimination. A test at Dearne Valley Colliery showed that a box containing five pounds of coal dust placed on the top of a loaded tub lost 2 lb. 14 oz. in weight after proceeding 840 yards on a mechanical haulage road.

The tendency is to provide independent travelling roads for men and horses, and so the dust on the roads is not stirred up and mixed as it used to be. The result is that a film of nearly pure coal dust is formed on roof, floor and sides of mechanised haulage roads, and there may be a film containing 80 per cent. combustible matter lying on top of a heavy deposit of stone dust. To what extent this film may propagate a coal dust explosion is not known with certainty, so that efforts should be made to prevent its formation by (1) suppressing the dust at its source and (2) stone-dusting the roads continuously or at least at very frequent intervals. Better small quantities at frequent intervals than large quantities at longer intervals. One of the most disquieting features of recent years has been the spread of a small initial explosion throughout a whole district, and perhaps the most urgent safety problem of the moment is to devise measures to prevent such happenings again.

Systematic Stone-dusting.

It is in the frequent application of stone dust that the greatest hope appears to lie. Mines are now sampled systematically, but stone dust is rarely spread systematically. The Inspector says it is frequently left to the subordinate officials, who judge by the eye, to say when it is to be applied. It is an old adage that "Prevention is better than cure" and it is perhaps understating the case to say that systematic application of stone dust is equally as important as systematic sampling. In Mr. Humphrys's experience this aspect of the question has not received the attention it deserves, for many managements are unable to say at what intervals of the particular roads are stone-dusted. Such an important matter should be placed on the same basis as systematic support at the working face. Maximum periods should be prescribed by the management, and subordinate officials allowed discretion to stone dust at more frequent intervals if found necessary.

At Thorncliffe Colliery, on a haulage drift, a test showed that the amount of dust deposited in a month on trays of 216 square inches placed 80 yards apart on full and empty roads varied from 3.4 to 6.4 grams where 13,000 tons of coal had passed and the air velocity was 540 feet per minute. The combustible contents of the deposited dust varied from 31.6 to 56.8 per cent.

At Askern Main Colliery an experiment was carried out at the instance of Mr. J. Hawley, Junior Inspector. Stations were selected at five points on the roadway, one on the return side of the loading point of a gate conveyor and the remainder at various points on mechanical haulage roads. At each station six trays were fixed, each half a square foot in area. They were attached to a steel arch at various points on its periphery. After six weeks the dust deposited on each tray was weighed and analysed, and the results calculated in weight of combustible matter deposited per square foot. On the trays on the return side of the gate conveyor the average amount of combustible matter was four times that on the other trays, varying from 22 grams per square foot near the roof to 60 grams per square foot near the floor. The actual amount of dust found on the trays was considerably higher owing to the amount of stone dust used, the maximum weight being on the centre trays. The air velocity and quantity of coal passing the trays was much lower in the case of those inbye the conveyor loading point than elsewhere.

The Sharlston Continuous Duster has been installed at a number of mines. There can be no doubt that its use results in an intimate mixture of coal dust and stone dust, and so prevents the imposition of a layer of coal dust on one of stone dust, but Mr. Humphrys says experience has shown that the rate of discharge should be varied to suit individual circumstances and that in some cases it may be necessary to supplement it by band dusting the floor where, it is well known, the dust is generally higher in combustible contents.

North Midland Precautions.

Discussing the reduction in the amount of coal dust made, Mr. G. Cook, the North Midland Divisional Inspector in Charge, says that in order to reduce the quantity of coal dust made at the faces more attention has been given to the sharpness of the coal-cutter picks and to the fitting of mechanical gummers to the machines. Shot-firing has also been reduced, and at one or two mines coal-bursters are being used and have practically eliminated shot-firing, with the result that less dust is made.

Wider and slower running conveyors have been installed at some mines and tubs have been increased in size; both measures have largely reduced the amount of dust raised into the air and also the amount of spillage. At one mine' a chute was erected to bold sufficient coal to fill a tub; this can be closed whilst the tubs are placed under it and the spillage, which usually takes place whilst changing tubs, is largely overcome.

Steel tubs are replacing wooden ones, and tubs are being kept in a better state of repair.

At one mine the coal dust which is being cleaned up at delivery points and alongside conveyors is put into bags and sent out in this way, while at another the coal gummings and cleanings up are filled into special tubs fitted with covers made of sheet metal. This prevents the dust rising into the air and afterwards being deposited on the roof and sides of the road as was the case when the dust was simply thrown on to a conveyor, or into open tubs from which it was afterwards blown out by the air-current when passing along the roads.

Water, in the form of a spray, is being applied at a delivery chute, which has been encased to prevent the air-current carrying the dust away, and has reduced the amount of coal dust settling on the roof and sides, and enables it to be easily cleaned up from the floor.

More mechanical gummers have been installed during the year, and by the use of some types the reduction in the amount of dust made when cutting is very noticeable. The two chief reasons for this are first, the cuttings are brought out from under the cut and deposited clear of the picks and are not drawn back and ground into dust by them; and second, the dust in the cuttings is not thrown into the air as is the case where they are removed by hand. Incidentally, the attachment of a gummer to a coal-cutting machine reduces the power required to drive the machine owing to the cut being kept clear of cuttings, and in one design forms a guard to the chain.

Stone-dust distributors operated by compressed air are being more widely used both as a means of keeping roadways clean and also for spreading the dust. It is easily adapted to give continuous application of stone dust throughout the coal turning shifts where coal dust is being deposited. At one mine three such dust distributors have been put into use at loading points, and whereas previously great difficulty was experienced in keeping these places in satisfactory condition this has now been largely overcome.

In order to clear away dust which has been deposited on the roof and sides of the road, and afterwards to apply stone dust, the manager at Blidworth Colliery has designed an apparatus operated by compressed air and has proved efficient. It consists of a cone-shaped container for stone dust fitted to an ordinary tub-chassis. The container has a capacity of about three hundred weights and has a dust-tight lid. Inside the container is an arrangement of pipes, the air from which agitates the dust falling into an ejector fitted on the outside. From this ejector a length of armoured hose is fitted which is sufficiently long to reach all parts of the roof and sides of the road. The machine is connected to the compressed-air mains at suitable points along the roadway by means of a hose. In the first operation the air valve to the inside of the container is kept closed and air is passed through the ejector. By means of the outlet hose the air is directed into the crevices in the packs, behind laggings and above the girders supporting the road, which dislodges any dust there and cleans up the area. This dislodged dust is collected as far as possible and filled into tubs. After this has been done the other valve is opened and stone dust ejected from the outlet hose is blown into the air and deposited over the cleaned up area; a certain amount of stone dust is carried in the air-current and dilutes the dust dislodged in the first operation which may not have been collected. The machine is then moved forward and another length of roadway is treated in a similar manner.

In addition, a small stone dust ejector is used at loading points and dust is applied from time to time during the filling shift and after cleaning up at the end of the shifts.

At Markham No. 2 Colliery a stone-dusting appliance is being tried to spread dust automatically on a main endless roadway and is operated by the passing of full tubs. Samples taken since its introduction have given satisfactory results. It is as yet in an experimental stage. It consists of an open topped outer box of iron or steel supported from girders near the roof of the road. Inside this there is a fiat plate which is attached by means of a flexible rope running over pulleys to a lever at the side of the road which in turn is connected to a counterbalanced lever in the centre of the track. As the tubs pass along the road the track lever is depressed by the tub axles and causes the plate to be raised. After each axle passes over the lever the plate returns quickly to its first position and causes a small quantity of stone dust to be ejected from the space between the sides of the box and the edges of the plate. The dust is raised into the air and settles along the road. The amount of rise and fall of the plate can be varied by altering the length of the levers and thus regulating the quantity of dust liberated.

The advantage of this apparatus is that it can be used on any haulage road and is not dependent on other sources of power. As the dust is liberated near the roof it is suspended in the air-current for a longer period and therefore treats a longer length of roadway.

Problem's Increasing Proportion.

With the development of mechanisation, reports Mr. J. Macleod Carey, the Cardiff and Forest of Dean Inspector in Charge, the problems of coal dust production and prevention assume increasing proportions. Wherever practicable, he says attention should be devoted to the problem of prevention, and some progress has been made in this direction at conveyor loading points, and in improved means of removing the gummings from the cut behind longwall machines. Devices suited to these objectives have now been developed beyond the experimental stage, and there is scope for their wider adoption.

Transfer points in conveyor systems are prolific sources of dust production, and, while much has been done by using properly designed chutes and controlling the height of fall of the coal stream, greater use should be made of suitably designed hoods at these points, to enable the transfer to take place in comparatively still air and so reduce the escape of dust into the ventilating current.

The extension of conveyor methods, and the increasing use of mechanical tipplers in rubbish roads, facilitate the adoption of doorless, welded type trains, and the reduction of coal dust deposits on haulage roadways of the collieries where such trains are in use is sufficient recommendation to warrant their more extensive adoption.

As many as 60 pneumatic picks may be in use on one face, and the dust thus produced often constitutes a serious nuisance. Hitherto, the ports of these machines have been primarily designed to direct the exhaust air away from the operator, and it usually impinges upon the coal face and floor, forcing dust into the air-current. An improvement can often be effected, comments Mr. Carey, by loosely covering the exhaust ports with cloth or canvas, but the problem is one which might well be tackled by the designers of these machines.

Ejectors at Delivery Ends of Conveyors.

At the delivery ends of face conveyers and of gate conveyers where dust extraction plant is not in use, coal dust is often freely made and deposited, and although these places are usually thoroughly treated with stone dust prior to the filling shift, the deposition of coal dust may render the precaution ineffective in a few hours. At such places there is wide scope for the introduction of continuously discharging stone dust ejectors, a light, portable type of which can be fitted up at any colliery. The amount of compressed air used is very small, and the rate of discharge can be adjusted to maintain the necessary proportion of incombustible matter in the dust deposited. The quantity of stone dust required when discharged continuously is normally such as to cause no inconvenience to workmen in the vicinity, but all this dust is put into the air stream and particular care should be taken to choose a dust which is harmless. These ejectors could be usefully employed in the return airways from conveyor and machine-cut faces, and where pneumatic picks are used.

The practice of removing dust, cleaned up from the roadways, in bags which are afterwards stowed in the gobs, has much to commend it, and should be adopted wherever practicable. Brushes should be more generally used for removing fine dust from the roof and sides.

As a means of preventing the formation of dust in rock drilling operations, wet drilling should be more widely adopted, and encouraging results are being obtained in experiments with a non-dust-producing type of rotary drilling machine. Greater use should be made of mist-projectors for dealing with the dust produced in shot-firing and other processes. Where wet drilling is impracticable, use should be made of the approved types of dust-traps now available.

At some collieries it is the practice of the drillers to work on an overlapping shift, and they commence drilling operations on the intake side of a district as soon as the colliers have left the face, the drilling on the intake side being completed before the oncoming shift arrives. With this method, the face workers are not exposed to an air-current containing injurious dust.

Smooth Running Plant —

Remarking that the question of controlling the production of coal dust in mechanised mines has still to be solved, Mr. E. Rowley, the Midland and Southern Division Inspector, has no doubt that considerable improvements can be attained without great difficulty. Indeed it is true to say that those measures which tend to ensure efficient, smooth and trouble-free running of coal-cutting and conveying machinery, will also tend to reduce the formation of coal dust.

It is recognised, for instance, that excessively fine dust in the holings — one of the most prolific sources of dust-is a sign of inefficient cutting. As indicated in an earlier report by Mr. Rowley, the size, and incidentally the value, of the cuttings can be improved by the use of sharp picks, and attention to the chain and cutting speeds. Further improvement may be effected by finding the most suitable design of pick, and by use of one or other of the gumming machines now on the market. Several mines in his Division are using these machines with excellent results, both in respect of the amount of blasting required and the size of holings produced.

Raises Less Dust.

At conveyor loading points smoother working will result and less dust will be raised in the air by attention to the following points :—

(a) Grading of the track to minimise bumping.

(b) Reduction in the height of fall and the use of properly designed chutes.

(c) Reduction of spillage; for example, by the provision of means to arrest delivery whilst changing tubs.

At semi-permanent main loading points roof, floor and sides should be made as smooth as possible to facilitate the removal of dust deposited.

If a dust extractor plant is not installed, it may be necessary to clean up the stone dust at a busy loading point two or three times in a shift.

The installation of effective dust-extractor plants at these semi-permanent stations would solve not only the difficulty of keeping in compliance with the Regulations throughout the coal shift at the loading points themselves, but would prevent dust being carried in the air and deposited over considerable lengths of roadway and face. Mr. Rowley is pleased to report that three of these plants have been installed, with very successful results, at one of the pits in Kent, and that their use is to be extended.

Another useful development which has been practised for several months at a colliery in Warwickshire is that of treating particularly dirty lengths of road with calcium chloride. This has the effect of hardening the floor, and thus making subsequent cleaning and stone-dusting easier and more efficient. The method of application is very simple, the floor merely being cleaned and the calcium chloride scattered on the cleaned surface by hand.


Names mentioned in this article

 

 Name  Age  Occupation  Notes 
Carey, Joseph Macleod    H.M. Divisional Inspector of Mines  Whos Who Page
Cook, George    H.M. Divisional Inspector of Mines  Whos Who Page
Hawley, J.    H.M. Junior Inspector of Mines  
Humphrys, Herbert John    H.M. Divisional Inspector of Mines  Whos Who Page
Rowley, Elijah    H.M. Divisional Inspector of Mines  Whos Who Page



Related Articles

Pub.
Date
Article (Newspaper)
13 Jan 1940  Accidents And Their Prevention (The Science and Art of Mining)
27 Jan 1940  Accidents And Their Prevention (The Science and Art of Mining)
09 Mar 1940  Accidents And Their Prevention (The Science and Art of Mining)
23 Mar 1940  Accidents And Their Prevention (The Science and Art of Mining)
06 Apr 1940  Accidents And Their Prevention (The Science and Art of Mining)
20 Apr 1940  Accidents And Their Prevention (The Science and Art of Mining)
04 May 1940  Accidents And Their Prevention (The Science and Art of Mining)
18 May 1940  Accidents And Their Prevention (The Science and Art of Mining)
01 Jun 1940  Accidents And Their Prevention (The Science and Art of Mining)
15 Jun 1940  Accidents And Their Prevention (The Science and Art of Mining)
29 Jun 1940  Accidents And Their Prevention (The Science and Art of Mining)
03 May 1941  Explosives And Their Substitutes (The Science and Art of Mining)

 

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 28 Nov 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print