Logo Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Main Document Archive
Newspaper Articles
Articles by date
Articles by colliery
Personal name index
Local Record Extracts
D.M.A. Document Archive
Transactions of I.M.E.
Miners' Welfare
N.C.B. Archive
The Colliery Engineer
The Colliery Guardian
Mine & Quarry Engineering
Mining Journal
The Science and Art of Mining
Coal Magazine
Coal News
Coke and Gas
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious


 Newspaper Articles Index Newspaper Articles 

4th May 1940, Page: 344, Column: 2

Coal-Cutting With Mechanical Gummers

At the April meeting of the Midland Institute of Mining Engineers Messrs. H. Watson Smith and Geoffrey M. Gullick presented a paper on "Coal-cutting with Mechanical Gummers : with Special Reference to Kerf Widths and Depths," in which they said that, except in special cases, undercutting coal-cutters will be fitted with gummers as standard practice in the future. Some advantages suggested as likely to accrue are (1) Safer and more comfortable working during cutting ; (2) Improved cutting performance with economies in labour, power consumption, pick life, and machine maintenance ; (3) Better face conditions, lower blasting costs, with improved coal preparation and getting ; (4) A reduction in the number of coal-cutters required due to an increase in the output per machine; (5) Where advantage is taken of reducing the width of kerf, the gas emission from the cutting operation is reduced in approximately the same ratio ; (6) Ability to widen the kerf or, alternatively, to increase the depth to suit special circumstances ; (7) By the reduction of fine coal dust; (8) An increased market value for the gummings resulting from a reduction in the proportion of smaller sizes.

There are several different types of gummers. All have proved that the place left cleanest within the kerf is the back of the cut. The gummings which escape are deposited in the kerf at the front of the cut, diminishing towards the back. The operating efficiency of the gummer may, therefore, be measured by the amount of gummings which it traps, as a percentage of the total made.

The seam conditions and system of working determine which type of gummer, side or end discharge, should be employed. Generally speaking, if the free passage of the gummings delivered to the side of the machine is obstructed, the end discharge is to be preferred. The obstruction may be due to very heavy timbering with props or chocks set close to the side of the machine with the distance between them so small that the outlet from the gummer is continually being closed as they are passed. Such a condition prevents the proper functioning of the gummer. This difficulty is much aggravated when the cut is in dirt, which will not flow in the same manner as small coal, and if it comes out in large pieces the condition is still worse. A change in such a case to the end type where the dirt was heavy proved an immediate success, the side type having failed.

Again, the conveyor practice on the face may be a determining factor, for if the conveyor is moved over into its new track before cutting, and is placed hard up against the row of props which form the cutting track between them and the face, there is insufficient space between the conveyor and the mouth of the side discharge gummer for the gummings to come out freely and pile up. Thus, this is another case for an end discharge but if the timbering is not heavy, and the conveyor is moved after the cut has been made, the side discharge has much to commend it.

By normal kerf is meant that which has been generally accepted as standard in the past, and, unless otherwise specified, averages about 5½ inches according to the gauging of the picks in the boxes, which make up the cutter chain. If there seems no obvious reason to reduce or increase the normal kerf width, and no advantages to be seen in altering the existing depth of cut when a gummer is fitted, the comparison in performance and results is then confined to cutting with and without a gummer.

The Authors concluded their paper, which deals only with undercutting machines, by stressing one of the most important points connected with successful cutting, including such matters as blasting efficiency, roof supports and control, and face conditions generally — namely, the effective nogging of the cut coal. Mention had been made of cases where a gummer may prove a disadvantage, but this was qualified by suggesting that in such cases the system of inserting nogs into the kerf, and the type of nogs used, may obviate the difficulties which, without special attention to this matter when the gummer is applied, may, under existing practice, seem serious.

The very object of the gummer being effectively to clear from the cut or vent practically all the material which otherwise gave some support for the undercut coal and the roof above, it is imperative that this support should be replaced by effective nogs. In stressing this the Authors mean that the right type and size of nog, to be found usually only by experiments, should be driven into the kerf as close to the cutter chain as possible, and at such intervals as experience may determine.


Names mentioned in this article

 

 Name  Age  Occupation  Notes 
Gullick, Geoffrey M.      
Smith, Harry Watson      Whos Who Page


 

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 28 Nov 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print