4th November 1939, Page: 133, Column: 2
Folds And Faulting In N.S. Coalfield
With further reference to the paper on "Some Peculiarities
of the Western Side of the North Staffs. Coalfield," read by
Mr. C. G. Knapper before the N.S. Colliery Under-managers' Association,
the following notes may suitably be reproduced :—
Folds and Faulting. — On the western side we find the
"Apedale"
fault, which constitutes the chief dislocation of the central part
of the coalfield and exerts a very marked effect on the economical
development of the district. Owing to the great displacement
a wide strip of the barren part of the upper coal measures
has been wedged in between the richly productive central and
western part of the coalfield, beneath which of late years only
the "Great Row" coal has been worked, and that at the Holditch
Colliery. The main direction of the fault is N.N.W. and S.S.E.
This fault reaches its maximum throw near the old Apedale
Ironworks, where it brings a considerable thickness of "Keele"
beds against the "Etruria" Marls, thus having a throw of some
600-700 yards. Going northwards the fault diminishes at the
Jamage Colliery down to as low as 150 yards; this is due to the
fault splitting. The inclination of the strata is very variable
on the western side, ranging from 10° to 70°. The conspicuous
western ridge coincides with the saddle arrangement known locally
as the "Staffordshire anticline," which reaches an elevation of
744 feet above O.D. at Alsager's Bank, but denudation has played
its part inasmuch as the great height of Alsager's Bank is
attributable to a capping of hard sandstone, the "Bullhurst"
rock, thus forming the crest of the dome. Very near to an old
quarry opened in the Bullhurst rock the experimental oil wells
or borings are said to have reached the Bullhurst coal at a
depth of 28 feet. The borings were incidentally on the crest of
the dome. Between Apedale and Alsager's Bank the measures
are nearly flat at the surface, but very soon approximate to
verticality in depth, which explains how a depth of 4,245 feet
was reached in the boring without touching the carboniferous
limestone. At this depth volcanic ash was bored into, hence the
boring was stopped. On the western side of the anticline the
most southerly workings are those of the Madeley Leycett Collieries
in which the lower coals are worked chiefly from the Bullhurst
coal up to the 4 feet Moss seam.
Folding of the Bullhurst and Banbury 7-foot Seams. — The
folding of the seams was interesting from a geological, but
distressing from a method of working point of view, especially
in the case of the Bullhurst seam, which is very much subject to
spontaneous combustion on the western side. All the districts
were laid out on the panel system in the Bullhurst; the method
of working was the retreating pillar and stall method. Preparatory
stoppings were erected immediately in each barrier as soon as
possible in case a gob-fire broke out.
In the view of the lecturer the western side of the coalfield is
much more difficult to work economically than the eastern and
Pottery coalfields, due very largely to the difficult geological
features, the anticlines and synclines and the underlap faults,
and aiso the very heavy inclinations.
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Knapper, C. G. | | | |