23rd September 1939, Page: 87, Column: 1
Coal-fired Power Stations
Mr. J. R. Beard, in his presidential address to the Association
of Supervising Engineers, dealt with the siting and design of
coal-fired power stations. He said the disposal of ashes was of
some importance, as in weight they represented some 12 per cent.
of the coal burnt and might amount to more than 50,000 tons
per annum. In stoker-fired stations up to 95 per cent. of the
grit could be removed. Regarding steam raising he said that
probably the most important change was the great increase in
the size of the combustion chamber and the consequent decrease
in the heat released per unit volume. Another was the use of
water walls. Concurrently, the size of individual units had been
increased so that outputs equivalent to 20,000 kw. to 30,000 kw.
were now normal. In order to get maximum efficiency, the flue
gas temperature had to be a minimum, and this had led to the
use of waste gases for pre-heating the air.
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Beard, J. R. | | | |