Logo Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Main Document Archive
Newspaper Articles
Articles by date
Articles by colliery
Personal name index
Local Record Extracts
D.M.A. Document Archive
Transactions of I.M.E.
Miners' Welfare
N.C.B. Archive
The Colliery Engineer
The Colliery Guardian
Mine & Quarry Engineering
Mining Journal
The Science and Art of Mining
Coal Magazine
Coal News
Coke and Gas
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious


 Newspaper Articles Index Newspaper Articles 

14th January 1939, Page: 209, Column: 1

Safety In Coal Mines

Royal Commission's Recommendations

From Royal Commission on Safety in Coal Mines Report, Cmd. 5890. 7s. 6d. net, H.M. Stationery Office.

Qualifications and Duties of Mine Officials.

The questions of overhauling the examination machinery a of requiring candidates to provide evidence of having attended suitable courses of preparation are matters for the new Board for Mining Examinations to consider.

It is desirable in principle that professional bodies should set up their own professional standards, and that (subject to appropriate safeguards) professional qualifications should where practicable be recognised as equivalent or alternative to statutory certificates.

Managers and Under-managers. — Subject to the two paragraphs above, the statutory qualifications for managers' and under-managers certificates should remain in general unchanged, but approved university degrees in engineering should be recognised as the equivalent of one year's practical experience.

The duties assigned by the manager to the several officials of the mine should be in writing. Every person who is appointed by the manager to supervise operations in the mine should be responsible for complying with the safety requirements involved and for the safe conduct of those operations.

Under certain conditions, the manager should be relieved of having to sign each of the statutory reports separately.

It should be obligatory to appoint an under-manager at mines employing 300 or more persons below ground (subject to certain powers of exemption by the district inspector). When two or more under-managers are appointed to take charge of different parts of a mine, one of them should be designated as the manager's deputy and should be required to keep himself in touch with the whole mine in accordance with arrangements approved by the district inspector.

Some responsible official should always be in charge of the mine on shifts when neither the manager nor under-manager (if any) is on duty. He should exercise the responsibilities of an under-manager, and the minimum qualifications required of him should depend on the number of persons normally below ground during the shift.

Officials between Under-manager and Deputies. — An official in responsible control over two or more deputy's districts should be known as an overman. Overmen, nod other officials with special duties in positions superior to those held by deputies, should have one of the appropriate qualifications recommended by the Holland Committee.

Electrical and Mechanical Staff. — Engineers who are not subordinate to the manager should have a due share of the responsibility for any matters in which they take part, whether through the superior officials or in direct relation to an individual manager.

Electricians and their assistants appointed by the manager under the Electricity Regulations should be required to have statutory qualifications, of which there should be two grades. Electricians-in-charge should have Grade J. certificates, except for certain small installations for which a Grade II. certificate would suffice, and assistant electricians performing responsible duties should have Grade II. certificates. Service certificates should be granted under appropriate conditions to persons who hold certain technical qualifications and to other persons now employed as electricians, assistants or apprentices.

The electrician-in-charge should be made statutorily responsible for the proper performance of his duties, which should specifically include the maintenance of electrical apparatus in safe condition. The manager should be required to specify in detailed written instructions how these duties are to be carried out, including in particular the frequency of examinations and tests. All electrical apparatus in use at the face and all portable apparatus in use within 300 yards of the face should be examined by a competent electrician at least once every 24 hours. The motors of electrically driven conveyers and loaders should be examined by a competent person whenever the apparatus is re-erected in a new position, before the current is switched on.

The manager should be required to appoint a competent person to supervise all the mechanical plant and equipment at the mine, with statutory duties and responsibilities similar to those imposed on the electrician. At the more highly mechanised mines, this person should hold a statutory certificate, and for other mines there should be suitable requirements to ensure that the person appointed has had sufficient experience for the work.

It would often be advantageous for both the electrical and the mechanical plant to be under the charge of one person, if suitably qualified.

Surveyors. — Surveyors should be appointed by the owners in writing and their appointments should be notified to the district inspector.

The surveyor should be provided by the management with all necessary facilities and information to enable him to keep the mine plans up-to-date, and should himself be legally responsible for making the plans accurately.

The qualifications of surveyors should be as recommended by the Holland Committee, and where the surveyor at the mine does not himself hold the proposed higher grade certificate there should be periodic check-surveys by a surveyor with such qualification.

Deputies. — The key to increased safety at the working face is close supervision by the official in charge. To secure this, the size of deputies' districts should be reduced. The district should be sufficiently small to enable it to be inspected completely in 1½ hours. The reduction in size should be coupled with a modification of the present provisions so as to permit of the deputy undertaking additional duties of control and supervision, on the general principle that there should be one official in immediate charge of all the operations in each district. The practice as regards deputies' duties in Northumberland and Durham should be brought into line with that in the rest of the country within a period of three years.

A full (pre-shift) inspection of the district should be made within 1½ hours before the commencement of each shift whether work is continuous or not, and during each shift there should be: (a) at least three inspections of all places where persons are at work and (b) at least two inspections of all places where persons pass. No place where persons are at work should remain uninspected for more than four hours.

Any place fenced off should be examined and reported on as to its state of ventilation, and condition if practicable, once in every shift.

Roadways outbye of the deputies' stations and airways not in the deputies' districts should be inspected and reported on daily by a person holding a deputy's certificate.

It should be permissible for a deputy to be accompanied by an assistant when inspecting an empty district.

The most desirable arrangement is for the deputy coming on duty to make the pre-shift inspection for the shift of which he is to be in charge, but that may result in his not being able to remain in the district till the end of his shift. As there should be a requirement that someone with a deputy's qualifications must always be in charge of a district when men are at work there, it should be permissible, if the district deputy cannot him self remain throughout the shift, for the management to appoint some other person working in the district who hold's a deputy's certificate to take over the responsibility.

There should be (a) a report of the pre-shift inspection and (b) a general report covering the rest of the shift. The form for the hatter should be so arranged as to encourage the deputy to write a full and intelligent report, and a timed "log" should be a permissible alternative to a report under specified headings on a standardised form.

The alternative systems of qualification recommended by the Holland Committee should be adopted, and in addition all candidates should hold a first-aid certificate, and should be able to see a gas-cap on the flame of a safety-lamp from 1¼ per cent. upwards, as well as to estimate gas percentages accurately with a safety-lamp at 2 per cent. and over.

A deputy must have adequate authority and status to exercise effective control and supervision over his district. Important points for consideration in this matter are the amount of a deputy's remuneration in relation to that of the workmen under his control, and the desirability of all deputies belonging to, and being represented by, an independent organisation of their own.

The district inspector should have power, if satisfied that there is a prima facie case for inquiry, to investigate a complaint by a deputy that he has been discharged because of the way he has carried out his safety duties.

Ventilation.

Systematic Sampling of Mine Air. — Provision should be made for regularly and systematically sampling the air-current in every ventilating district, in safety-lamp mines, at intervals depending on the firedamp contents, and on whether or not electricity is in use within 300 yards of the working face; and in naked light mines once a quarter.

In safety-lamp mines only the firedamp content need be determined; this should be done with an approved apparatus capable of giving readings on the spot, but should be checked at intervals by analysis. In naked light mines the oxygen and carbon dioxide should be determined, as well as firedamp, and all the samples should therefore be analysed.

The sampling results and the monthly determinations of air quantity should be recorded in the same book, and in certain circumstances copies of entries should be sent to the district inspector.

The existing power to classify mines according to the amount of the inflammable and noxious gases in the main return airway and to regulate the quantity of air accordingly is not wanted, but power to classify districts, seams, or mines according to their firedamp content might be retained for other purposes.

Firedamp Standards. — The withdrawal standard for workmen in safety-lamp mines should (after a reasonable period for any necessary improvement in the ventilation) be reduced from 2½ per cent. to 2 per cent.* In naked light mines men should not be permitted to remain at work with naked lights if any gas can be found with a flame safety-lamp in the ventilating district in which they are to work or pass.

In addition, the "representative firedamp content" at the return end of a face or district should not normally exceed 1½ per cent. If it exceeds this figure and the district inspector does not assent, with appropriate safeguards, to a figure between 1½ per cent. and the withdrawal percentage, he should have power to require the management to improve the ventilation within a specified period. If the owner disputes the reasonableness of the inspector's requirements, the decision of the Secretary for Mines should be final, but he should have power to consult the local tribunal.

As regards the use of electricity, existing requirements should be supplemented by a provision prohibiting the introduction of electricity within 300 yards of a working face if any one of six consecutive weekly samples taken at the return end of the face (or elsewhere in the area if so directed by the inspector) shows a firedamp content exceeding 1 per cent.

If, after electricity has been introduced within 300 yards of a working face, any air-sample within that area shows a firedamp content in excess of 1 per cent., the use of electricity should be discontinued in that area until the content is again brought below that figure.

Electricity should be cut off from any apparatus in the neighbourhood of which any gas-cap can be seen on the flame of a safety-lamp. Every case in which the current is so-cut off should be noted in the deputy's report, and reported to the district inspector, if current has been cut off under this provision it should not be switched on again without the deputy's authority.

Ventilation Practice. — Monthly measurements of air-quantity should continue to be made as at present, and should also be made at both ends of each working face or at such suitable points as shall be fixed by the manager with the approval of the district inspector.

The steps which the district inspector may require the management to take when the representative firedamp content of any ventilating district exceeds 1½ per cent. should include the making of a ventilation survey.

Every upcast shaft should be provided with a properly constructed air-lock, except at "small" mines and at shafts exempted on certain special grounds.

Doors or sheets between intakes and returns should be at least double, and so arranged that, if one is open, another doing the same work is shut. Only properly constructed doors should be permitted in the connecting roads between main intakes and main returns.

From the ventilation point of view there are great advantages in many cases in the continuous stowing of the wastes and, while it is not suggested that this should be compulsory, the Mines Department should take up the matter with the industry with a view to the practice being more widely adopted.

All new development should be based on a minimum standard of three airways, and, subject to appropriate provisions for exemption, for every newly opened seam there should be three main airways for each part of the seam which is served by a separate main haulage or trunk conveyor, and for every newly opened or re-opened ventilating district there should be three airways to the working face from the point where the district is opened or re-opened.

Subject to exemption in special cases, no airway should have an area of less than 16 square feet, or be less than four feet in height or three feet in width.

In all headings and fast ends the ventilation should be constantly taken up at the face of the working or the fast end by means of brattice, air pipes or otherwise.

Abandoned reads or levels should be properly stowed up or walled off. In the case of places fenced off temporarily as a result of gas, steps should be taken to restore the ventilation without delay.

The district inspector should have power to object to the continuance in use of existing auxiliary fans, and such fans, except for use when driving headings, drifts or tunnels, should not be newly installed without the inspector's prior approval.

The use of compressed air for ventilation purposes should be prohibited, except with the express consent of the district inspector.

Hot Mines. — Ventilation should be adequate not only to dilute and render harmless any noxious or inflammable gases, but also to maintain conditions of temperature and humidity which are not prejudicial to health, If the cooling power of the air does not reach a prescribed minimum based on kata-thermometer readings, the district inspector should fix by agreement with the management a period within which the position is to be corrected. Failure to agree on the period should be referred to the local tribunal whose decision should be final.

Support of Workings.

Support Rules. — The manager should be required to draw up detailed support rules, on the lines recommended by the Support of Workings in Mines Committee, which should be illustrated by plans and sections or diagrams, so as to describe fully and separately the systems of support to be observed for the working faces, road-heads and roads respectively in each seam, and the materials and dimensions of the supports to be used in each case. The rules should include provisions, where necessary, for ensuring the lateral stability of supports.

A copy of the rules for each mine should be sent to the district inspector, and subsequent amendments notified when made. Copies should be posted at the pithead and at deputies' stations, and be given to each deputy.

The inspectors should undertake a complete review of the systems of support for each seam in their districts, with a view to improving them when necessary. Any disputes with the managements over the action to be taken in particular cases should be dealt with by the proposed local tribunals, whose decision should be final. It would be helpful to inspectors in this matter if managers were required to keep a record of all falls of more than a certain size at the working faces and on main roads.

The enforcement of the support rules at the working face and road-heads requires constant effective supervision and should be a duty specifically imposed on the deputies.

The depth of cut in a machine-cut face should be open to objection by the district inspector if considered prejudicial to safety, and it should be one of the particulars to be specified by the manager in the support rules.

To secure the most effective roof control in machine mining, inspectors should have power in certain circumstances to require the adoption of the sequence "stripping, hacking, cutting," which is believed to be the safest.

Support at the Working Face. — The roofs of all working faces should be systematically and adequately supported, irrespective of natural conditions.

The distance between holing sprags should be subject to an absolute maximum of five feet instead of six feet as at present. As regards other supports the manager should be required to obtain the consent of the district inspector before fixing distances between supports exceeding certain prescribed limits.

The systematic use of bars should be compulsory in all longwall faces, unless exempted by the district inspector, whose decision should be final. Where bars are not used, the use of proper lids should be required.

Where packs constitute part of the system of support, they should be well-built, suitably spaced and made tight to the roof.

All overhanging coal or clod should be adequately supported. There should be appropriate provisions regarding the methods to be adopted under certain defined conditions for supporting the face itself.

The existing provisions as to the supply of supports should he modified on the following lines: (i) A supply equivalent to the maximum requirements in any shift to be kept constantly available in each deputy's district. (ii) The manager to see that there is an efficient organisation in each district for keeping each workman supplied with sufficient supports as required in the course of his shift. (iii) The deputy to be responsible for seeing that the organisation functions properly in his district.

Support of Road-heads. — Except in seams worked by bord-and-pillar without top-ripping of the roads, the systematic use of bars, set not more than three feet apart, should be part of the system for supporting that part of the road-head which lies between the working face and the face-ripping, if any, subject to the district inspector having power of exemption on grounds of impracticability.

Special treatment is necessary for the adequate support of the "face" and "lip" of the face-ripping.

Support of Roads. — Systematic and adequate support should be required throughout the whole length of every road, with the exception of: (a) Existing roadways, or parts of roadways, which are at present unsupported, and extensions or branches of such roadways under similar natural conditions, unless the district inspector requires them to be supported ; (b) Newly made roadways, where an exemption is granted by the district inspector, having regard to the natural conditions of the strata.

Where systematic and adequate support is not required throughout, it should in any ease be required at busy places (subject to exemptions for special cases).

Where roads have to be systematically supported they should be supported across the full width of the road, and the distance between supports should in no case exceed six feet.

Temporary supports should be erected whenever any work is being done in the repair of the roof or sides of a roadway, and an adequate supply of suitable material should be provided on the spot before the work of repair is commenced.

Withdrawal of Supports. — With certain exceptions, no support should be withdrawn except by means of an approved safety contrivance. A sufficient number of approved safety contrivances should be provided and maintained by the owner of the mine.

Haulage and Travelling.

Layout and Condition of Haulage Roads. — Every haulage road should be as straight and as regular in gradient and section as is practicable or advisable, and the district inspector should have power to require the manager to effect rectification or improvement, subject to the manager's right of appeal to the local tribunal.

Every haulage road should be of such dimensions as will allow a loaded tub to pass without touching the sides, or roof, and, according to the type of haulage, there should be certain minimum clearances** of general application, subject, however, to relaxation or exemption by the district inspector in particular cases.

The existing requirements providing for minimum clearances should apply at coupling places wherever sets or trains consisting of two or more tubs are coupled or uncoupled. In addition, there should be a clearance above the tubs, as well as at the side.

Great importance is attached to the value of good lighting in preventing haulage accidents. Efficient lighting should be required at busy points and the Secretary for Mines should have power to prescribe standards of lighting and permissible methods by which such standards are to be attained.

Haulage Plant. — In order to secure rigidity and stability of the track there should be provisions governing rail sections in relation to the load, the methods of laying and securing rails and the size and distance apart of sleepers.

New haulage ropes and drawgear should be made of British Standard material or material approved by the Board of Trade, The use of weldless gear should be encouraged. All drawgear. other than drawbars and existing couplings not capable of being detached, should, unless exempted, be annealed or given other proper heat treatment once at least in every 12 months, in an approved manner. Recommendations are made regarding the use of limbers, the design of shackle-pins, and the knotting of haulage ropes.

The maximum load for each haulage system should be prescribed by the manager. He should allow a wide margin of safety in the strength of the drawgear units according to their material.

The existing requirements as regards safety devices on inclines should be reviewed, and amended on the principle that where practicable all such devices should be positive and automatic in action, and that no person should work without protection in any place where he is exposed to injury from a runaway tub.

At coupling places where sets or trains consisting of two or more tubs are coupled or uncoupled, unless the tubs are so designed as to prevent persons from being crushed between the ends, suitable devices should be kept and used for safeguarding persons while coupling or uncoupling. On main or main-and-tail rope haulages, the coupling or uncoupling of tubs in motion should be prohibited, and the detachment by hand of the main rope from sets or tubs in motion should only be allowed under conditions permitted by the district inspector.

Pulleys, sheaves or rollers used in connection with rope haulages should be securely fixed and (with certain exceptions) should he securely fenced.

Maintenance and Supervision of Haulages. — There should be a general provision requiring all tracks, tubs, ropes, gear and appliances used in connection with haulage to be inspected and reported upon by competent persons weekly, and maintained in an efficient condition.

The manager should be required to appoint a competent official to have responsibility throughout the mine for such matters as the installation, inspection and maintenance of haulage plant, seeing that the various requirements in regard to haulage are observed, the supervision and safety of all persons working on the haulage, and the training of haulage boys.

(To be continued.)

* Subject to reservations by Mr. E. O. Forster Brown and Mr. John Walker.

** Subject to reservation by Mr. E. O. Forster Brown.


Names mentioned in this article

 

 Name  Age  Occupation  Notes 
Forster Brown, Edward Otto      Whos Who Page
Walker, John      



Related Articles

Pub.
Date
Article (Newspaper)
18 Dec 1935  Safety Of Mine Workers, Royal Commission Personnel (The Yorkshire Post)
04 Jan 1936  Personnel Of Royal Commission (The Science and Art of Mining)
01 Feb 1936  Royal Commission Operating (The Science and Art of Mining)
29 Feb 1936  Safety In Coal Mines, Some Points in Evidence (The Science and Art of Mining)
28 Mar 1936  Safety In Coal Mines, The Deputy's Prayer (The Science and Art of Mining)
23 May 1936  Safety In Mines, Inspectors Offer Suggestions (The Science and Art of Mining)
23 May 1936  First Hand Studies (The Science and Art of Mining)
20 Jun 1936  Safety In Coal Mines, Reason Given for More Districts (The Science and Art of Mining)
18 Jul 1936  Safety In Coal Mines, Midland and Southern Division (The Science and Art of Mining)
01 Aug 1936  Under-Managers Give Evidence (The Science and Art of Mining)
01 Aug 1936  Safety In Coal Mines, Swansea Division (The Science and Art of Mining)
15 Aug 1936  Safety In Coal Mines, Recommendations for Scottish Mines (The Science and Art of Mining)
29 Aug 1936  Safety In Coal Mines, Northern Division Conditions (The Science and Art of Mining)
12 Sep 1936  Safety In Coal Mines, The Cardiff Area (The Science and Art of Mining)
26 Sep 1936  Safety In Coal Mines, Dividing Divisions into Districts (The Science and Art of Mining)
10 Oct 1936  Safety In Coal Mines, New Conditions Created (The Science and Art of Mining)
24 Oct 1936  Safety In Coal Mines, Views of Firemen's Associations (The Science and Art of Mining)
07 Nov 1936  Safety In Coal Mines, Evidence of Research Stations Director (The Science and Art of Mining)
21 Nov 1936  Safety In Coal Mines, Major Hudspeth's Evidence on Researches (The Science and Art of Mining)
05 Dec 1936  Safety In Coal Mines, Under-managers' Views before Commission (The Science and Art of Mining)
05 Dec 1936  The Personal Factor (The Science and Art of Mining)
19 Dec 1936  Safety In Coal Mines, Colliery Officials' Views (The Science and Art of Mining)
02 Jan 1937  Safety In Coal Mines, Electricity in Mines (The Science and Art of Mining)
16 Jan 1937  Mines Commission (The Science and Art of Mining)
16 Jan 1937  Safety In Coal Mines, Electricity in Mines (The Science and Art of Mining)
30 Jan 1937  Safety In Coal Mines, Medical Problems Considered (The Science and Art of Mining)
30 Jan 1937  Mines Commission (The Science and Art of Mining)
13 Feb 1937  Safety In Coal Mines, More About Silicosis (The Science and Art of Mining)
27 Feb 1937  Mines Commission (The Science and Art of Mining)
13 Mar 1937  Safety In Coal Mines, Colliery Managers' Statement (The Science and Art of Mining)
27 Mar 1937  Mines Commission (The Science and Art of Mining)
08 Apr 1937  Mine Haulage Problems, Some Commission Pointers (The Science and Art of Mining)
24 Apr 1937  Safety In Coal Mines, Views of Mineworkers' Federation (The Science and Art of Mining)
08 May 1937  Safety In Coal Mines, Mining Association's Views (The Science and Art of Mining)
19 Jun 1937  Safety In Coal Mines, Dust Prevention Methods (The Science and Art of Mining)
17 Jul 1937  Safety In Coal Mines, Dangerous Conditions or Occurrences (The Science and Art of Mining)
31 Jul 1937  Safety In Coal Mines, Education of Mine Workers (The Science and Art of Mining)
14 Aug 1937  Safety In Coal Mines, Views of Institution Council (The Science and Art of Mining)
28 Aug 1937  Safety In Coal Mines, Views of Institution Council (The Science and Art of Mining)
17 Dec 1938  Mines Safety Report (The Science and Art of Mining)
31 Dec 1938  Safety Commission's Report (The Science and Art of Mining)
14 Jan 1939  Safety In Coal Mines, Royal Commission's Recommendations (The Science and Art of Mining)
14 Jan 1939  Problems For Mining Community (The Science and Art of Mining)
28 Jan 1939  Safety In Coal Mines, Royal Commission's Recommendations (The Science and Art of Mining)
11 Feb 1939  Development Of Safety Legislation (The Science and Art of Mining)
11 Feb 1939  Mines Safety Bill Proposed (The Science and Art of Mining)
25 Feb 1939  How Mining Industry Has Changed (The Science and Art of Mining)
11 Mar 1939  Colliery Ventilation (The Science and Art of Mining)
25 Mar 1939  Support Of Workings (The Science and Art of Mining)
22 Apr 1939  Colliery Explosions And Fires — I (The Science and Art of Mining)
06 May 1939  Colliery Explosions And Fires — II, Shot-Firing Standards (The Science and Art of Mining)
03 Jun 1939  Commission's Miscellaneous Pointers — I (The Science and Art of Mining)
17 Jun 1939  Commission's Miscellaneous Pointers — II (The Science and Art of Mining)
01 Jul 1939  Commission's Miscellaneous Pointers — III (The Science and Art of Mining)
15 Jul 1939  Commission's Miscellaneous Pointers — IV, Safety Organisation at Mines (The Science and Art of Mining)
29 Jul 1939  Commission's Miscellaneous Pointers — V, Occupational Diseases (The Science and Art of Mining)

 

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 28 Nov 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print