31st December 1938, Page: 200, Column: 1
Safety Devices on Inclines
The Fifth Report of the Safe Working of Mines Committee of
the South Staffordshire Institute of Mining Engineers, on "Working
Provisions at the Top of Inclines," presented by the Investigator,
Mr. J. W. Robinson, at the December Institute meeting, emphasises
that all safety devices should be simple and robust in
construction, easy and safe to operate, judiciously placed, and
frequently examined, tested, and maintained in perfect working
order. Dragbars or backstays fitted to ascending tubs should be
long enough to prevent overriding in the event of a run-back.
The provision of two prongs in the place of one would be more
effective, and if the prongs were spaced wider than the rope rollers,
damage to the rollers would be minimised. They should also
have their points remade at intervals, as excessive wear may
prevent them from taking an immediate hold in the event of a
runaway. Axle-type backstays should have a wide bearing on
the axle; this distributes the impact on arrest and reduces the
possibility of bent axles. This wider bearing has also the added
advantage of keeping the tail end of the drag between the rails,
and of being more effective in the case of a runaway.
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Robinson, J. W. | | | |