|
21st May 1938, Page: 362, Column: 1 Coal Dust PrecautionsThese notes are based on the Mines Inspectors Reports for 1936. The price of each Report is 1s. net. Copies are obtainable through H.M. Stationery Office. In his report for Scotland Mr. E. H. Frazer, the Divisional Inspector, emphasises the fact that the general regulations lay down the minimum percentage of incombustible dust that may be applied, and that it does not follow that safety is assured in all mines by bare compliance with the regulations. It should therefore be the aim of all colliery officials, he avers, to see that the combustible content of all the dust about a mine is kept well below the statutory limit, adding that in applying inert dust the motto should be : "A number of light treatments are better than a single heavy dose." He says that if four bags a month be needed it is preferable to apply a bagful each week, so that the coal dust is covered at more frequent intervals and more intimately mixed with the stone dust. Reference is made to the step taken by the Fife Coal Company, Ltd., to reduce the amount of dust produced. In a working face dipping at 1 in 2 they installed a retarding conveyor. Coal thrown upon this conveyor is lowered gently to the bottom of the face by a series of blades on moving chains. Previous to the use of this conveyor coal was thrown into fixed pans, down which it slid at high velocity, creating much breakage and dust at the loading end. Now more round coal is obtained and the dust produced is greatly reduced. Dust-collecting Plant. In his notes on precautions against the danger of coal dust Mr. W. J. Charlton, in the North West Division report, points out that coal dust is set free into the air, and can be carried for long distances, by all processes of getting and conveying coal, to a degree depending largely on the structure of the coal; scams differ greatly in this respect. Not only is the dust a menace to safety from its inflammability but in some instances it causes great discomfort. The dust made when coal-cutting machines are at work, particularly if the cut is near roof level, and also when pneumatic picks are being used, is very unpleasant, and Mr. Charlton hopes efforts will be directed to combat this nuisance. Several methods of dealing with the nuisance of dust at conveyor loading points have been evolved. The method developed by Messrs. J. Anderton and F. S. W. Dobbs, manager and agent respectively of Moss Colliery, has been attended with considerable success and merits description. Dust-laden air is drawn into a canopy suspended over the loading place, and thence into a series of tubes arranged as follows Firstly, there is a 24-inch diameter tube 18 inches long in which a mist projector is mounted. Next comes a tube six inches long tapering from 24 inches in diameter to nine inches. Thirdly, a nine-inch diameter tube, also six inches long, which is connected to a fourth tube, 12 inches long, which increases in diameter from nine inches to 24 inches. In the narrow end of the fourth tube there is a ring from which six jets of water are played on to a point nine inches further down the same tube. These jets reduce the dust to sludge, which is deposited in a fifth tube 24 inches in diameter and 18 inches long, and then scraped out on to the conveyor and delivered into the tub. The consumption of water is about 60 gallons a shift, and the persons engaged at the loading point can now work in comfort. Still another form of dust-collecting plant — the "Huwood" — is used in North Staffordshire. A motor-driven fan draws dust-laden air through a tube connected to a steel canopy over the delivery end of the conveyor, and deposits the dust into a series of 36 vertical cloth pipes, six feet in length, and nine inches in diameter. In one instance a test has shown that the quantity of fine dust collected is 3.66 ounces per ton of coal loaded at the conveyor end. Before the apparatus was installed the attendant wore a respirator, which has been discarded. Functioning of Inert Dusts. Limestone dust is still used at a number of collieries in the Cardiff and Forest of Dean Division. Reporting on the matter Mr. J. Macleod Carey says it has been found, from experiments carried out under practically identical conditions, that limestone dust is not so easily raised into a cloud as is shale dust, by the concussion caused by shot-firing operations. Further, at the loading ends of conveyors, limestone dust tends to form a substratum over which coal dust — made during the process of tipping coal into the trams — is deposited in a thin layer. Shale dust does net suffer so much from this defect, but when disturbed mixes more freely with coal dust in suspension. The managements at various collieries are fully aware of the necessity for using inert dust which contains a low percentage of silica, in order, as far as possible, to allay the suspicion that the stone dust laid down may be a cause of silicosis. On the other hand, they do not wish to use any inert dust which does not function in the manner in which it is intended, that is, to rise quickly in suspension and prevent the propagation of flame. The danger of coal dust raised in suspension in the form of dust clouds at loading ends of conveyers in the dry steam coal pits is still a problem requiring much thought, and from the view-point of safety, as well as because of the adverse conditions in which men have to work, Mr. Carey says it is highly desirable that colliery companies and the manufacturers of conveyors themselves should give it careful consideration. Points Calling for Attention. Near the delivery ends of face and gate conveyers, Mr. T. Ashley reminds the management in his Swansea Division report, constant attention is needed to keep the combustible matter well below the 50 per cent. permitted by the regulations. The amount of stone dust needed to treat these lengths of roads can be judged by sampling and, as the quantity of coal dust made at any conveyer face will be more or less constant for that particular face, it becomes a matter of routine for cleaning up to be done and the required amount of stone dust applied. It is a good rule to do this at the end of every coal-getting shift. Generally, greater attention should be given to cleaning up the dust on the floor before further stone dust is applied, and to watering between the rails to reduce the amount of dust raised when men and horses are travelling. The Inspector says the dust on roads, especially main intake airways, should be removed by filling it into bags, as is the practice at a few mines, instead of making it into heaps to be filled at some future time into trams during which operation a large proportion is dispersed again by the air-current. Considerable attention is still being given to dust preventive measures at the screening plants of anthracite mines. Exhaust fans are being fitted to carry the dust by means of air tubes from the tippler and from ether points where dust is made, and shaker screens are being partitioned off from the picking belts. In some instances more attention should be paid to the trapping of the dust which is delivered by the fan so that it is not again dispersed into the atmosphere. One method of dealing with the dust so collected is to deliver it into chambers where it is converted into sludge by exhaust steam.
|
|||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 28 Nov 2022
|
Search |
|
|||