7th May 1938, Page: 341, Column: 2
Notes On Safety Measures
Speaking at the National Safety First Association's Industrial
Safety Conference Mr. R. N. Le Fevre said he was a firm believer
in the value of visual demonstration in all forms of training.
With boys in particular more can be achieved by actual demonstration
than by hours of lectures and note taking. A good
demonstration, by a carefully protected instructor, of both right
and wrong methods leaves little doubt as to which is the safety
one.
Mr. G. C. Clarke suggested that where individual machines are
concerned, the safety requirements should be in the specifications
to which the designer works. Hitherto, buyers have usually had
to add guarding to newly delivered machines before they could
set them to work. Such conditions often result in poorly designed
and hastily constructed fencing with the probable neglect of
essential points.
Declaring that machine guarding, however good, did not ensure
freedom from machinery accidents, Mr. B. L. Lelliott said that
just as much care and attention must be given to the safety
education of those working on or near the machines as to the
fencing and guarding. For the multitude of accidents due to
thoughtlessness, carelessness, dangerous practices and the like,
carefully planned schemes which solicit and maintain interest are
essential. It is of vital importance that opportunities should be
seized by the safety organiser to provide executives with carefully
selected, up-to-date information on safety. Examples of such
information are: Monthly reports on facts revealed by the
accident register, a comprehensive annual report, minutes of
safety committee, minutes and reports of accident investigations,
information on the latest types of safety devices, and extracts
from such publications as the Safety First Association's bulletins
and pamphlets, the Home Office quarterly descriptions of accidents
and foreign safety publications. The next problem is to educate
the man in the works. Despite criticism safety posters seem as
popular as ever and continue to be used by industry throughout
the world.
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Clarke, G. C. | | | |
| Fevre, R. N. Le | | | |
| Lelliott, B. L. | | | |