17th July 1937, Page: 9, Column: 2
New Iron Alloys
The advantages offered by special alloyed types of cast-iron,
notably those based on the addition of nickel, were discussed
at the annual general meeting of the Society of Chemical Industry
at Harrogate by Dr. A. B. Everest. Compared with the traditional
type of cast-iron, he stated, such alloys could give a
mechanical strength which was two to three times as great, five
hundred times the resistance to certain acids, and a degree of
hardness which was not equalled by any other cast metal. While
normal cast-iron possessed the advantages of cheapness, and
ease of casting and machining, Dr. Everest pointed out that
unsoundness and segregation might lead to porosity and open
grain, particularly in large sections, with deleterious effects on
the wearing and on the corrosion and heat resisting properties
of the metal. The need for better castings had been specially
felt by chemical engineers. Uses of austenitic irons were found
in pumps, including impellers and castings, valves and valve
bodies, filter plates, pipes, rotary filters, rams, and in general
for castings of all types where severe conditions were encountered.
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Everest, A. B., Dr. | | | |