|
22nd May 1937, Page: 353, Column: 1 Some Aspects Of Mine IlluminationBy Thomas Bryson, A.R.T.C., M.I.Min.E., M.I.M.S. From paper read at a joint meeting of the Past and Present Mining Students' Association (Wigan Mining and Technical College) and the Lancashire branch of the Institute of. Mine Surveyors. The Author is president of the Institute. Continued from page 345. Electric Hand Lamps. The year 1880 saw the introduction of electric lamps for stationary purposes underground, and in 1886 Sir J. W. Swan patented a glow lamp with a reflector behind and a bullseye lens in front. This lamp was reputed to give illumination equal to two candles diminishing to 1 c.p. at the end of 10 or 12 hours. Herr Max Sussman patented a portable electric lamp in 1893. The secondary battery contained two cells in series, each containing three lead plates embedded in a paper pulp saturated with sulphuric acid. Being nearly dry the lamp could be used in almost any position, and it gave a candle-power of one. Whereas the Swan lamp weighed 7 lb. the Sussman weighed 4.3 lb. In 1912 Herr F. Farber patented the details of an electric lamp which was successful in winning the prize of £600 offered by the late Sir Arthur Markham. The Ceag lamp, as it was called, consisted of a secondary cell with concentric lead electrodes contained in a housing of corrugated and tinned sheet steel. The upper part containing the glow lamp was held on by a bayonet joint and locked magnetically. The bulb was mounted between helical springs to avoid breakage, and was protected by a glass dome and four pillars. The light was switched on and off by turning the upper part relative to the lower, and the intensity of illumination was equivalent to that given by one candle. It weighed 5.2 lb. An innovation in electric lamps was the introduction of the Wolf alkaline lamp, which was made in two sizes, the smaller one being capable of giving 1.5 c.p. for 16 hours, and the larger one 2 c.p. for 20 hours or more. The original Oldham electric safety-lamp had a 2-volt lead-acid battery contained in an outer case of pressed steel, and it was designed for use with liquid electrolyte or jellac electrolyte if desired. Whereas alkaline lamps are built in two parts, the top part containing the lamp and the lower part containing the battery, lead-acid hand lamps are generally made in three parts: the accumulator, the case, and the top part carrying the bulb and well glass. The original Oldham lamp weighed 5¾ lb. The publication of the Coal Mines General Regulations (Lighting) of June, 1934, was the signal for a great effort on the part of lamp-makers to provide safety-lamps which would afford miners a greatly enhanced measure of illumination by which to carry on with their work. In the main these regulations anticipated that better lighting would be provided and, as a consequence, that accidents would diminish and the incidence of nystagmus be reduced. No argument is needed to convince you that all that was hoped for by way of improvement has been attained in the standard of illumination provided. By improvements in bulb and battery construction we may now have electric hand lamps giving even more light than that given by the best of flame lamps. The colour of the light given by electric lamps is not the same as that given by flame lamps, and you may prefer it, but with clear bulbs and well-glasses the glare seems more troublesome to miners than the softer flame of the latter. However, by the use of opalescent, prismatic, and dioptric glasses the glare is minimised, if not quite eliminated. Electric Cap Lamps. It was inevitable that the quest for better electric portable lamps should have given an impetus to the manufacture of cap lamps, especially in coalfields where miners had long experience of the use of small spirit lamps burning oil and acetylene cap lamps. Lamps worn on the cap have the distinct advantage that as the attention of the wearer is turned from one point to another the full light of his lamp is focused on the field of active vision. Miners thus equipped have a great advantage over those whose lamps are so much inferior in illuminating power and so incapable of being placed in the best position with respect to the eyes and the point upon which the eyes are focused. Provided with such a lamp and working under such circumstances that the vision is centred on a point 4 feet from the eyes the measure of the light illuminating objects at that distance is 1 foot-candle. When it is remembered that only a few years ago we were aiming at 0.2 foot-candle we can appreciate the comparative comfort of a miner wearing an electric cap lamp. Working in hot mines with little clothing the carrying of the battery on the waist-belt may at first feel uncomfortable, but the greater benefit of good light should be an incentive to persistent effort to become accustomed to the lamp. Leakage of acid is prevented by the use of solid electrolyte. Several very good lamps are now marketed, and of these the Oldham-Wheat lamp may be mentioned as embodying several new features. The battery case is made of hard rubber, and it is claimed to be nearly twice as strong as steel, but lighter. The lantern is fitted with two bulbs, one for emergency use, and the other a double-filament bulb for general use. The lantern is fitted with a switch, and as the cable is enclosed in cab-tyre sheathing, it is therefore quite flexible. A novelty of this lamp is that it is put on charge without dismantling; two metal contacts on the lantern engage with two spring strips on the charging rack. The applied voltage being greater than the cell voltage a relay in the lantern is actuated to complete the circuit through the cable to the battery. Mains Lighting. Mains lighting was first introduced to coal mines in this country as early as 1880, and since that time it has been used extensively for lighting shaft sidings, haulage roads, and engine houses underground, to a distance of 300 yards from the nearest working place in the intake airway and a like distance in the return airway measured from the upcast shaft. Bulkhead fittings may be fitted at regular intervals along the sides of the roadway, or lantern fittings having well-glasses may be suspended from the roof. [To be Concluded.]
|
|||||||||||||||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 28 Nov 2022
|
Search |
|
|||