Logo Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Main Document Archive
Newspaper Articles
Articles by date
Articles by colliery
Personal name index
Local Record Extracts
D.M.A. Document Archive
Transactions of I.M.E.
Miners' Welfare
N.C.B. Archive
The Colliery Engineer
The Colliery Guardian
Mine & Quarry Engineering
Mining Journal
The Science and Art of Mining
Coal Magazine
Coal News
Coke and Gas
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious


 Newspaper Articles Index Newspaper Articles 

13th March 1937, Page: 273, Column: 1

Notes On Surveyors' Examination

Central Examiner's Report

The table prepared by the Central Examiner shows that at the November (1936) examination for mine surveyors' certificates 50 candidates were present, and of this number 18 qualified in the written examination. There were 15 passes in the practical examination, the percentage of passes being 30, as compared with 12.3 in November, 1935, 9.6 in November, 1934, and 175 in November, 1933.

In the report the statement is made that altogether 36 per cent, of the candidates who presented themselves for examination obtained qualifying marks in the written part thereof — a result which has never been equalled since the present system of examination was initiated. Generally speaking, the work performed in the morning paper did not give promise of such a result, but answers to the afternoon paper reached a high standard of excellence, and many candidates were thereby enabled to make good the less satisfactory results of the morning.

By far the most satisfactory feature of the written examination was the success achieved by candidates in the Edinburgh Centre, where for some time past results have been very disappointing. It is also worthy of note that Newcastle once again maintained the high standard of excellence which has been a feature for some time past at that centre.

The weakness of candidates generally in tackling questions outwith the daily routine still persists. On the other hand there was evidence of some improvement in draughtsmanship in so far as it could be judged by work done in the preparation of the Geological section and the plan referred to in the second question of the morning paper. Similar work in the past has frequently raised doubt in the mind of the Examiner as to whether candidates fully realise that neatness as well as accuracy is an essential of a surveyor's work.

Below we give the text of the questions set at the examination, each question being followed by the comment of the Examiner on the work generally of the candidates. The comments are in italics. The official pamphlet containing the Question Papers (2s. net) is obtainable through H.M. Stationery Office.

Morning Session.

(1) Compulsory Question. — The plan. . . shows details taken from a Geological Survey map, and a generalised vertical section showing the relative positions of the various seams whose outcrops are indicated thereon. Draw in your answer book a longitudinal section of the line AB (shown on the plan), marking thereon the approximate position of No. 1 Limestone in relation to the surface. Plot your section to the same scale as the plan, and assume that the alluvium overlying the rockhead is 30 feet in thickness. (14)

About one-half of the answers were good — some of them exceedingly so — but the remainder were disappointing. All that the question asked was the position of No. 1 Limestone in relation to the surface, but many candidates added to their difficulties, and also needlessly wasted time, by plotting in the section the position of all the seams — a proceeding for which there was no necessity.

(2) A railway viaduct is 260 yards long and 20 yards wide, and a coal seam underlying it dips 1 in 10 in a direction coincident with the direction of the viaduct. The seam at the shallower end lies 320 yards below rail level. Draw a plan of the viaduct in your answer book to a scale of inch = 100 feet, and show in relation thereto the inner and outer areas of protection as referred to in the Mines (Working Facilities and Support) Act, 1923. (10)

The question was attempted by practically every candidate, and about 25 per cent. of the answers were excellent. The remainder were generally unsatisfactory, and invariably indicated an absence of any definite or accurate knowledge of what was asked for.

(3) A straight line AbcD forming part of a trigonometrical survey cannot be measured from end to end owing to an obstruction. The parts Ab and cD as measured, and the angles at a point O subtending the measured portions of the line, are as follow :—

Calculate the length of bc. (12)

Few candidates attempted this question, and only three of them obtained a correct solution. The problem is by no means a new one, and should present no difficulty to any candidate who has taken an intelligent interest in his work.

(4) Two haulage roads AEB and CFD in a mine, whose azimuths are respectively 24°58' and 324°44', are connected by a straight roadway driven from E to F. The co-ordinates, in feet, of the points E and F are as follow :—

It is proposed to drive a curved road which shall be tangential to each of the lines AE, EF and CF. Calculate the radius of the curve. (8)

Answers to this comparatively simple question were very disappointing, only six being correct or even approximately so. In many instances candidates appeared to be hazy as to procedure following the calculation to determine the azimuth and length of the line EF.

(5) A colliery shaft is 500 yards in depth, but the seam previously worked at that level is exhausted, and the workings are now waterlogged — the level of the water in the shaft being approximately 450 yards from the surface. Working in another seam situated at a depth of 300 yards from the surface is being carried on, and you are instructed to prepare a graph of the rising water level in the shaft from measurements taken weekly. State clearly how you would do so, on the assumption that there is no entry to the shaft below the present working level. (8)

Answers generally were fair. The absence of an entry to the shaft below the working level necessitated the adoption of a reference mark at that level, from which to make the periodic measurements through the cage seat to the rising water level. Several candidates ignored that convenience, and proposed to carry out their measuring operations from the mouth of the shaft. In some instances the apparatus for ascertaining the level of the flood water was not satisfactory.

(1) Compulsory Question. — The notes of a short underground traverse are as follow :—

It is proposed to drive a new roadway to connect the points A and F, which is to be done simultaneously from each of these points, and also from another point G exactly midway between them. Calculate the azimuth, and length of the line from station D to the midway starting point G, and also the azimuth of the new roadway AF. (14)

On the whole the answers to this compulsory question were good, apart from the determination of the azimuth and length of the line connecting the station D and the midway starting point G; which puzzled a considerable number of candidates.

(2) It is proposed to deposit debris from a mine by means of a self-tipping hopper operating on a rail track, rising at 1 in 3½ from a point A on a line AB. At the point B the leasehold boundary bears at right-angles to the centre line of the advancing debris heap, and is there 1,500 feet distant from A. No debris must be deposited beyond it. Calculate approximately the life of the tipping ground along the line AB on the assumption that a quantity of 400 tons of debris will be deposited per day. Assume the ground to be level, and any other additional data necessary for your solution. (12)

Answers generally were not so good as they ought to have been. The details supplied by candidates in so far as they related to the weight of debris in the loose, and the angle of repose of that material, were in many instances obviously mere guesswork.

(3) A cutting for a colliery railway is about to be made in ground, the surface of which slopes transversely to the direction of the railway. The slopes of the cutting batter at 1½ to 1, and the width at formation level is 15 feet. Calculate, without plotting, the cross-sectional area of the cutting at a point where, on the centre line of the railway, the formation level is 20 feet below the surface, the cross-slope of which is 10°. (12)

Answers varied from 20 to 5,000 square yards, and on the whole were no better than fair. Only about 20 per cent. of them were correct or approximately correct.

(4) A large area of longwall workings in a coal seam 4 feet 6 inches in thickness is advancing direct to the rise towards a mansion house, under which they will pass at a depth of 400 yards or thereby. The strata dip at 6 inches to the yard and are normal in character. You are asked systematically to record the progress of subsidence at the mansion house in consequence of that working. State how you would do so, and also : (a) When you would expect the first evidence of subsidence to show; (b) when you would expect it to cease; (c) what amount of subsidence, approximately, you would eventually expect to find. (10)

Answers generally were fairly satisfactory, apart from the facts stated with regard to the beginning and cessation of subsidence, which were frequently entirely incorrect.

(5) In correlating a surface survey to the Ordnance Grid it is found necessary to make observations to a trigonometrical station on a church spire, denoted by the letter C. Observations are made from a "satellite" or supplementary station D, which is 20.4 feet distant from C, and the following angles were measured, DA being zero: ADB = 71°54'30"; ADC = 296°12'00". The approximate lengths of AC and BC are respectively 5,407.2 feet and 7,128.3 feet. Calculate the angle ACB. (8)

Approximately 50 per cent. of the candidates attempted this question. Answers generally were good.

(6) Give a list of the various plans which require to be kept at a mine, in terms of the Coal Mines Act, 1911. Thereafter state fully the obligations imposed by the Act with regard to the provision of "Rescue" tracings, and sketch the Conventional signs therefore imposed by the Act and Regulations made thereunder. (8)

Answers generally were excellent.


Related Articles

Pub.
Date
Article (Newspaper)
24 Apr 1934  Notes On Managers' Examinations, Report of Central Examiners (The Science and Art of Mining)
29 Aug 1936  Board For Mining Examinations (The Science and Art of Mining)
27 Feb 1937  Examination Results (The Science and Art of Mining)
13 Mar 1937  Notes On Surveyors' Examination, Central Examiner's Report (The Science and Art of Mining)
27 Mar 1937  Notes On Managers' Examinations, Report of Central Examiners (The Science and Art of Mining)

 

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 28 Nov 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print