|
5th December 1936, Page: 168, Column: 1 Preparation Of Coal For MarketResearch Board's ProgrammeMining operations are outside the province of the Fuel Research Board, but as Sir Harold Hartley (chairman) states in the Report for the year ended 31st March, 1936 (H.M. Stationery Office, 4s. net), it is impossible to ignore the effect of the changes in mining which are taking place in the coal industry, as these may alter the characteristics of the coal when it reaches the surface. Thus they may have an effect upon the proportions of the various sizes of coal and upon the proportions of shale and other impurities which are mixed with it. Sir Harold instances one striking example of the alteration in mining methods, namely, the great increase in the amount of coal which is cut by mechanical means, a graph showing the increase in machine cutting and the cleaning of coal during the period 1927-1934. He says it will be recognised that it is not necessarily economical to introduce changes in mining technique which reduce the cost per ton of material raised, if the methods of treating this on the surface must be more costly, or if the coal raised contains an unnecessarily large proportion of sizes or grades of coal which have a low market value. Analyses of the coals from substantially all the collieries in South Yorkshire and many in Lancashire and Cheshire have been published in three reports of the Board's Coal Survey, and an examination of these shows the large number of different sized grades that are being placed on the market. Whilst a reduction in the number of these grades would simplify the selling of coal, there is a demand from consumers for close grading in order to enable certain classes of appliances to function with maximum efficiency. The question, as stated by Sir Harold, is not entirely that of standardising certain sizes of coal, as it depends upon the sizes of the grades naturally produced from particular seams. These will vary with the different seams and will depend upon their physical nature and the treatment they receive during mining. Another aspect of size-grading referred to by the Chairman of the Board is the production of the different sizes so far as possible in the proportions demanded by market conditions. This change in some eases already involves the deliberate breaking of large coal to the sizes required, and this practice must undoubtedly be extended, Sir Harold adding that the problem involves also the preservation of the desired sizes when produced. The Fuel Research staff could not examine every case where investigation appears desirable, but experience already gained is a useful guide to the methods that can be used and to the points which require the closest attention, and they are therefore now in a position to draw up a scheme for the investigation of the problem of sizes at a particular colliery. There is a further question in the preparation of coal for the market, that is, the mixing or blending of coal from different seams, which is of special importance in the manufacture of coke. Sir Harold says there are already signs of a shortage in first-class coking smalls in the country, and it has been recognised that the supply of the finest coking coals is limited, although there is no lack of coal possessing medium coking properties. Increased knowledge of the possibility of blending coals which, although unsuitable for use alone, will yield satisfactory coke when blended, is of major importance. Another advantage of blending is the possibility of confining within strict limits the proportion of sulphur or phosphorous in metallurgical coke. The Board have therefore been giving special consideration to the desirability of extending their investigations of blending. The main items in the programme of the Board are :— Coal survey, the most important item, defining the raw material available for practically the whole of the investigations. Preparation of coal, which is steadily assuming increasing importance. Whilst work is still proceeding on the cleaning of fine coal and the clarification of washery water, more attention is being paid to the problems involved in the production and marketing of definitely graded coal. Carbonisation of coal, in connection with which it has been found that certain hard coals (durain) with a suitable but rather critical degree of caking power, if carbonised in suitable sizes at low temperatures, and then activated by steam at high temperatures, will provide an active carbon very nearly, if not quite, as good as the best obtainable from other sources, and at a considerably lower cost. Steam raising. The pulverised fuel burner and distributor at the Station are giving good service in industrial plants and have enabled considerably higher loads to he maintained in Lancashire boilers than was possible before they were installed. The hydrogenation of tar and coal have progressed, and the engineering difficulties and those of temperature control have been overcome, experience having been gained which would enable a simple large scale plant to be designed if required. Investigations are being continued on the constitution of coal. Experiments having for their object the production of a first class lubricating oil from coal have so far been unsuccessful. Further reference to the processing of coal is made by Dr. F. S. Sinnatt, the Director of Fuel Research. In the introduction to his Report he says :— Attention was drawn in the last report to the ever-increasing tendency to regard coal as raised from the mine as a raw material requiring processing before it is offered for sale. Developments during the past year have confirmed this, and emphasised the complexity of the problems involved. There are few instances where the whole of the coal from a seam is sold without grading, cleaning or other treatment. In most cases one or more of the following processes take place before the coal is offered to the consumer :— (a) Selection of definite portions of seams, such as "hards" and "brights," for separate marketing. This is usually effected by hand picking the large coal, the small not being separated. (b) Mixing of the coal, or part of the coal, from two or more seams. This may be done either as the simplest method of dealing with the coal, or it may be precisely controlled by the mixing of different coals to produce consignments with definite properties. (c) Sizing of the coal by screening, and in some cases augmenting certain sizes by the deliberate breaking of the large coal. Such breaking has long been the practice with, for example, Welsh anthracite, where graded small coal realises a higher price than large coal, This practice is extending in districts where the market for large coal is diminishing. In the past the large coal has generally realised the highest prices, but graded and cleaned coal of smaller sizes is equally or more valuable for many purposes. (d) Cleaning of the coal. Large coal is, and has long been, cleaned by hand on the picking belts. Increasing amounts of small coal are being cleaned by washing or by dry cleaning, and a large proportion of such coal is now treated in this way. The preparation of the coal for the market really starts at the coal face. The methods of mining and underground transport adopted affect the nature, size, and purity of the coal as raised, and consequently the subsequent treatment that is desirable. The ideally best method of working a pit depends on the nature of the seams available, as regards quality and variation in quality; on the geological conditions of the seams and associated strata, which determine what methods of mining are practicable; and on the market conditions, which determine what grades are most desirably marketed. The ideal can only be attained when starting de novo and with full knowledge of all the relative facts. In practice this is seldom possible, and the methods adopted must depend on the existing equipment and condition of the pit. The developments taking place in methods of mining, preparation and utilisation of coal have added to the complexity of the problem. Knowledge is increasing rapidly, and those engrossed in their own work— usually concerned mainly with only one of the three branches mentioned above — are finding it difficult to keep abreast of developments and to see the problems of mining, preparation and utilisation as a whole. The cleaning of coal raises an increasing number of problems which require solution in terms of the local conditions; among these are; (a) The extent to which any particular coal can, or should, be cleaned. This depends on the nature of the coal, and the purpose for which it is to be used. There are, for example, cases where the fusion point of the ash is of greater importance than the amount of ash, and the extent to which the coal is cleaned may have a pronounced effect on this property. (b) The cleaning of washery water, and the recovery of the fine coal carried in the water. Such recovery may or may not be advantageous according to circumstances, but clarification of the washery water is in most cases essential. The best means to adopt again depends on the nature of the fine material in the water. (c) The disposal of the dust from dry cleaners. It would appear that increasing attention is being devoted to the relationship of the mining, cleaning and sizing problems to the consumers' requirements. The installation of expensive plant for coal cleaning and grading will yield disappointing results if the operation of the plant is not flexible and related to the products required by the consumer. This situation is being recognised rapidly by the mining industry.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 28 Nov 2022
|
Search |
|
|||