Logo Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Main Document Archive
Newspaper Articles
Articles by date
Articles by colliery
Personal name index
Local Record Extracts
D.M.A. Document Archive
Transactions of I.M.E.
Miners' Welfare
N.C.B. Archive
The Colliery Engineer
The Colliery Guardian
Mine & Quarry Engineering
Mining Journal
The Science and Art of Mining
Coal Magazine
Coal News
Coke and Gas
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious


 Newspaper Articles Index Newspaper Articles 

28th March 1936, Page: 289, Column: 2

Use Of Explosives

Under the auspices of the Safety in Mines Research Board a lecture illustrated by cinematograph films entitled "The Safe Use of Mining Explosives" was given by Mr. C. S. W. Grice, of Sheffield, in the Wigan Mining and Technical College. Mr. Grice said that during the testing of explosives many definite facts had been found out about the relative safety of a permitted explosive when used under different conditions. The position of the detonator was all-important, and the safest position was when the detonator was in the outbye end of the charge, next to the stemming, the explanation being that by this means the weakest part of the explosive was next to the weakest part of the shothole, which is the stemming. In addition, by starting the explosion at that end, a blanket of burnt gas was placed in front of the remainder of the shot.

The lecturer said that clay was perhaps an unfortunate choice as a stemming material, as it tended to cling together and form a shell or projectile which could be fairly easily pushed out of the shothole by the explosive and which would, in fact, very often grease its own path. A very much more satisfactory substance for stemming would be a granular material which, from the fact that the grains were only in contact with one another at definite points, would tend to spread the force received at the end of the stemming and communicate it to the sides of the shothole, jamming the stemming even when used in comparatively small quantities. He explained the action of granular stemming by quoting the difficulty of making three footballs or billiard balls move in a straight line with one blow. Sand, like water, would not run uphill, and therefore the best alternative was to mix a fairly large proportion of granular material with just enough binding material to hold it together. The best mixture so far encountered was three parts of sand to one of clay, with the addition of about 3 per cent. of crude calcium chloride to keep the mixture moist so that it could be stored underground. Substitutes for both the sand and the clay had been found and tried where these ingredients were difficult to get.

Speaking of the danger of breaks in shotholes, Mr. Grice pointed out that with a break running across the line of the charge the shot was virtually unstemmed in that direction, and the danger was increased many times by the fact that compression mixtures containing as little as 2 per cent. and as much as 80 per cent. of firedamp were capable of being ignited in breaks, and that such ignition could be obtained by compression alone, without the assistance of a flame. Sheathed explosives had been devised in an attempt to secure protection against such undetected breaks, but the use of sheathed explosives must not be regarded as a licence to neglect looking for breaks. Sheathing as used in present day British explosives consists of a thin layer of material wrapped around the cartridge. This material is usually designed to give off large quantities of non-inflammable gas at a very low temperature, thus reducing the risk of explosions in breaks.


Names mentioned in this article

 

 Name  Age  Occupation  Notes 
Grice, C. S. W.      


 

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 28 Nov 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print