|
15th February 1936, Page: 246, Column: 1 Conversion Of Coal Into OilFuel Research Technical Paper No. 42 on the Action of Hydrogen upon Coal is Part II. of the series dealing with Early Experiments with the Bergius Process. Issued by the Department of Scientific and Industrial Research, Paper No. 42 is obtainable through H.M. Stationery Office at 1s. 3d. net. It reveals that the process operating at Billingham was first discovered by Bergius in Germany as the result of applying hydrogen under pressure to "Artificial Coal" produced by him from cellulose and peat. The Report makes public for the first time the results of many early experiments on the conversion of British coals into oil, and describes how the British Government, acting through the Department of Scientific and Industrial Research and its Fuel Research Board, ensured the development in this country of the process covered by the Bergius patents. The issue of the Report makes it clear that in view of the great importance of securing adequate oil supplies from British coal, the Department considers it highly desirable that the knowledge gained in every stage in the development of this epoch-making process should be fully available to British technicians. Bergius, the report states, as early as 1910 had evolved apparatus for working under high pressures, and after studying a number of other reactions he heated cellulose and peat in the presence of water to 340°C. at a pressure of 150 atms. The products were black solids which he considered similar to natural coal, and which he called "artificial coal." Later Bergius turned his attention to heavy petroleum oils which, when heated under pressure in hydrogen, gave a quantity of light spirit. On treating his artificial coals in a similar manner, Bergius obtained a 70 per cent. conversion into oil soluble in benzene. Natural coals were then found to behave similarly, and in 1914 Bergius patented the application of the process to coals and other solid carbonaceous substances. Further development was delayed during the War and, owing to the cost of high pressure work, little was done until 1921, when a plant on a semi-industrial scale was erected at Mannheim-Rheinau in Germany for treating oil. Research on the process was also initiated at the Fuel Research Station, Greenwich, in 1923, with a small home-made converter. From experiments there, it was satisfactorily established that the Bergius process afforded a means of obtaining much higher yields of benzene soluble material from coal than were obtainable by any other known method. British Coals Tested in Germany. In 1924, the British Bergius Syndicate was formed which obtained an option on the patent rights of the Bergius process covering the British Empire, and experiments were carried out at Mannheim-Rheinau to test the suitability of British coals for the process. The preliminary results obtained were favourable, and were communicated to the British Government. In view, therefore, of the importance to this country of any practical means of obtaining liquid fuels from British coals, it was decided that the Department of Scientific and Industrial Research should proceed with the investigations. An agreement was accordingly entered into between the Department, the British Bergius Syndicate, the Internationale Bergin Compagnie and Dr. Bergius, whereby the Option on the patents of this country which were shortly running out was continued. Further experiments were carried out at Mannheim-Rheinau in Germany on British coals. These experiments were supervised by a Committee, and in them trials were made with coals from various parts of the country in small converters, while "Orgreave Washed Slack" obtained from South Yorkshire was selected as a suitable coal for tests in a continuously operated plant. The results were again promising, and a plant embodying the latest improvements resulting from the work in Germany was supplied to the Fuel Research Station. This plant was installed towards the end of 1926 and in 1927, the small scale experiments carried out at Rheinau were terminated by agreement, and the work continued at the Fuel Research Station. Description of the Early Experiments. The Report, in describing the process as evolved originally by Bergius, states that his converters were at first glass lined, and then made of plain steel. They were rotated about a horizontal axis, with pebbles within to assist stirring; about 100 atnms. was the working pressure, and they were heated externally, either by gas or electricity, for about one hour. After removal, the products were distilled and treated by benzene extraction, the material so recovered being known as "oil." At a later stage in the evolution of his process, Bergius added oil to the charge, at first to avoid local overheating, and later to help in the working of a continuous plant into which a mixture of coal and oil could be pumped in the form of a paste. A further modification was the addition of a proportion of luxmasse, which consists largely of iron oxide with some alumina and tintanium, to the charge in order to fix the sulphur in the form of iron sulphide. From subsequent researches at the Fuel Research Station, it was established that the luxmasse had also a definite catalytic effect in hastening the hydrogenation of the coal, contrary to the statements of Bergius. Other British coals from the Nottingham and Derby, South Yorkshire and Durham coalfields were then tried, generally with satisfactory results. In the course of the work at the Fuel Research Station the early stages of the reaction were studied, and it was discovered that below the temperature of 450°C. normally employed by Bergius, the coal underwent marked changes. Thus, at about 370°C. in the case of a bituminous coal, reaction between the coal and hydrogen took place rapidly and resulted in the formation of a plastic material. If the products were allowed to cool immediately after reaching this temperature a solid product was obtained which had every appearance of having been through a fluid condition. This solid product, which was almost equal in weight to the original coal, had higher coking properties than the coal used in the experiment. The continuously operated plant at Mannheim-Rheinau consisted of two horizontal reaction vessels in series, contained in baths of molten lead, heated by gas, and fitted with simple mechanical stirrers. A paste consisting of tar, coal and luxmasse was forced through these vessels, with hydrogen, at 150 atms. pressure. Various modifications were tried and numerous tests carried out with varying success, details of which are given in the Report. The equipment which was installed at the Fuel Research Station as a result of the work is also fully described. It provided a continuously operating plant capable of dealing with a ton of coal a day, embodying all features of the latest practice, at the time of erection, of the Bergius Research Institution, together with an adequate plant for making hydrogen. This plant was used originally for studying Parkgate coal from South Yorkshire and later coals containing less ash, namely, coal from the Virgin Seam, Lanark, and finally Beamshaw coal from Wakefield.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 28 Nov 2022
|
Search |
|
|||