4th January 1936, Page: 200, Column: 2
Coke Problems
At a recent combined meeting of the Newcastle branch of the
Institute of British Foundrymen and the Northern Section of the
Coke Oven Managers' Association, Mr. W. E. Mordecai, B.Sc.,
in a paper on "Foundry Coke" said that not many years ago
coke was assessed primarily on the basis of a statement of its
chemical content of "fixed carbon," ash and sulphur. To-day
it is recognised that not only is the total amount of chemical
impurity of significance, but also the nature and constitution of
that impurity are of vital moment; and, although the influences
of diverse physical properties of coke have gradually assumed
equal importance, it is not yet fully appreciated to what extent
chemical and physical properties are interdependent. Cokes of
highest repute owe their superiority to especial physical properties
and to a high degree of chemical purity, and also to some essential
and peculiar interrelation of all these properties.
Mr. Mordecai supplemented his observations with a few questions
arising in the mind of a coke maker (a) What relationship has
diameter of cupola to size of coke? (b) How does the repair
condition of the refractory lining of a cupola affect coke
consumption and temperature of metal? (c) Why does beehive
coke continue to be favoured in some quarters, especially among
pot melters, even though its ash content may be very much higher
than in a by-product coke made from the same coal source ?
(d) What influence, if any, has coke quality upon such physical
properties of the metal as tensile, shrinkage, fluidity ? (e) Why
do some foundrymen weigh all the material entering and leaving
the cupola and others do not?
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Mordecai, W. E. | | | |