|
23rd November 1935, Page: 150, Column: 1 Dust In Coal MinesLecture By Professor Bryan, B.Sc. Effect on Health and Illumination. The West of Scotland branch of the Association of Mining Electrical Engineers and the National Association of Colliery Managers held a joint meeting on the 9th of November, when Professor A. M. Bryan, B.Sc., read a paper on "Dust in Coal Mines: Its Formation and Control," the objects of which were (1) to focus attention upon some of the problems arising from the formation of dust in coal mines, and (2) by stimulating interest and provoking discussion, to ascertain whether something more cannot be done to prevent the formation and dissemination of a very considerable amount of the dust that is now found in mines. He referred to the effect of dust upon health and illumination, stressing the point that "all dusts formed in the mine during the normal course of working are entirely incidental to the various processes in mining, and in no case are they purposely produced. Whilst it is true that we cannot conduct mining operations without forming dust, and that the formation of some incombustible dust is advantageous in certain circumstances, there is no merit whatever in forming coal dust or any kind of rock dust that is injurious to health . . . There is nothing to be gained by unduly taxing the mechanism which effects the elimination of dust from the lungs, and men should no more be required to work in a dusty atmosphere that can be ameliorated by practicable means, than they are required to work in an atmosphere that contains an undue proportion of noxious or inflammable gases." As regards the illumination lost because of the presence of dust in mines, the amount is often not fully appreciated, but "it will be readily agreed that the less dust there is in suspension in the atmosphere and the less coal or coal-dusty surfaces there are, the better will be the conditions from the point of view of illumination." Pointing out that at all times the presence of appreciable quantities of dust is altogether unpleasant and that at most times it is a costly and troublesome nuisance, the lecturer said the presence of dust of any kind adds appreciably to the costs of underground transport, of coal cleaning, and sometimes of ventilation as well as to the cost of manufacture, installation, maintenance and running of machinery, perhaps more particularly of electrical machinery. As he said "all electrical engineers are only too well aware that dust, especially when mixed with oil and moisture, is the greatest enemy of electrical plant and that cleanliness is essential to its proper maintenance. Part of the standard equipment of many motor rooms at mines is a pair of bellows or some other air blowing arrangement. But it is a very difficult matter to blow out fine dust from the windings of a motor even with air pressures up to 80 lb. per sq. inch. The less dust there is in the atmosphere either above or below ground, the better will be the maintenance and service of the machinery." Explosions Originating at Working Face. The principal danger from coal dust being the risk of explosion, the State requires the use of means to combat it, and as to the inert dust method of preventing coal dust explosions Professor Bryan pointed out that "it is not practicable to apply a sufficient quantity of inert dust along a working face to ensure tbat at all times the coal dust thereat is rendered harmless," and that "no satisfactory means of dealing with the fine coal dust made on the working face has yet been evolved," therefore " it seems clear that in these days of intensive mining the problem of the coal dust danger on the working face must be tackled sooner or later — and the sooner the better. Although the number of explosions in coal mines is considerably less than in the early days of mining it should be remembered that nowadays, apart from a few recent exceptions (unfortunately of considerable magnitude) by far the majority now originate at the working face, not infrequently are assisted in their propagation along the face by fine coal dust, and are usually confined to the face area because of the liberal application of incombustible dust on the roadways adjacent to the face." The suggestion was made that "if as much attention, intensive investigation and research as has been applied recently and is still being applied to rock dust problems, were applied to the problems connected with the formation and initial suppression of coal dust, a great deal less dust would be found in our coal mines, and the position in respect of comfort, health and safety and cost of working would be appreciably improved." Formation of Fine Face Dust. Remarking that in general far too much explosive is used in coal getting, the lecturer proceeded to say that mechanical coal-cutting is responsible for the formation of much of the fine face dust, urging that the kerf or undercut should be of the minimum thickness consistent with the fulfilment of its function, namely, the provision of just sufficient free space to enable the coal to be got down efficiently. "It may be," he added, "that in some mines the kerf thickness could be slightly reduced without detriment to the efficiency of coal-cutting, but with appreciable advantage in respect of dust formation." The view was expressed that "other things being equal, an overcut is to be preferred to an undercut from the point of view of dust formation," though it was recognised that "an overcut relatively high in the seam" may result in very high dust concentrations. Touching upon the relationship between cutting and chain speeds and the size of holings produced, the Professor has the feeling, where a machine produces more dust than it ought to, that some adjustments of the chain and cutting speeds could be effected with considerable advantage from the point of view of dust formation and degradation of coal, and consumption of power. The design, number and setting of the picks must have an important bearing on the size of the holings produced, and it should not be necessary to stress the need for sharp and durable picks. The efficient clearance of the holings from the kerf was emphasised, as failure to attain this objective is probably the major factor in the formation of fine dust by coal-cutting machines. Prevention of Free-fall and Spillage. On a conveyor face the amount of degradation of coal and formation of dust will mainly depend upon the skill of the fillers, the position of the conveyor in relation to the face and the type of conveyor used with regard to the ease of loading, amount of spillage involved and materials used in construction. The shallower the cut and the closer the conveyor is to the face the less is likely to be the amount of degradation of coal or amount of dust either formed or raised. Following a reference to variation in the dust-forming tendencies of the various makes of conveyors, mention was made of the relatively serious dust problem at the delivery end of conveyers and loaders. Prevention of spillage is largely a matter of organisation, and Professor Bryan's view is that "If more attention were given to prevention of 'free-fall' and spillage the dust nuisance at delivery ends would be considerably abated." At some collieries attempts have been made to collect the dust at loading points and so prevent its accumulation and dissemination, but with only a limited measure of success. With the additional experience now being gained from the problems arising out of de-dusting of coal at cleaning plants, the chances of obtaining a satisfactory device for the "de-dusting" of loading stations are materially improved. Having touched upon many of the sources of dust the lecturer said: "I think you will agree that there is room for more research into the effect of many of the operations performed in a coal mine upon the degrading of coal and the formation of dust. In any event, one thing is certain, and that is that the dust-producing tendencies of all coal mine machinery should receive careful consideration before it is purchased and installed. By careful study of the points mentioned, it is probable that considerable modifications could be effected which would result in a marked decrease in the amount of degradation and of fine coal dust produced on the working faces and, ultimately, throughout the mine. Dust Concentration Tests. The latter portion of Professor Bryan's lecture was devoted to the consideration of the results of an underground survey made to see if any comparison was possible between instruments of the konimeter type and of the filter type, though primarily to obtain some information upon the concentration of dust in mine atmospheres. Their experience showed that both methods have serious limitations, though they do provide some criterion of dustiness, and they do have their uses in mines apart from investigations concerning rock dust. He said a satisfactory instrument for the estimation of the dust concentration and size frequency of dust particles in an atmosphere, is essential to gain an accurate knowledge of the dust hazard and also for control purposes in order to gauge the efficiency or otherwise of any dust preventive methods adopted. In general, the instruments fall into two distinct groups (1) those which entail counting and sometimes measuring the dust particles under a microscope, and (2) those which involve a determination of the mass of dust per unit volume of air. Since the surveys under discussion were begun another type of instrument has been devised which gives great promise, and they hope to be able to carry out fresh surveys underground with the new instrument as soon as it is generally available and certified as satisfactory for underground use.
|
|||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 28 Nov 2022
|
Search |
|
|||