Logo Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Main Document Archive
Newspaper Articles
Articles by date
Articles by colliery
Personal name index
Local Record Extracts
D.M.A. Document Archive
Transactions of I.M.E.
Miners' Welfare
N.C.B. Archive
The Colliery Engineer
The Colliery Guardian
Mine & Quarry Engineering
Mining Journal
The Science and Art of Mining
Coal Magazine
Coal News
Coke and Gas
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious


 Newspaper Articles Index Newspaper Articles 

14th September 1935, Page: 74, Column: 1

May (1935) Examinations

Report of Central Examiners

See No. 4. page 56.

The Board for Mining Examinations has issued the report of the Central Examiners on the examinations in May last for certificates of competency as managers and under-managers. In this and succeeding issues the comments of the Examiners on the candidates' answers will he reproduced in italics following the setting of the questions, the plans and sketches being omitted. The comments on the examination for Surveyors in Mines were given in No. 4. page 56. The official Question Papers are obtainable in pamphlet form (2s. net) through H.M. Stationery Office.

Winning and Working (1st Class).

(1) Lay out the workings in a level seam, 600 yards deep and 4 feet thick, with a strong roof, for an output of 800 tons in one shift with the aid of coal-cutters and conveyors. What packs would you suggest should be built between the various roadways to be retained? Indicate on your plan the requirements for transporting the coal from the face to the main haulage, and sketch a short length of face showing how you would support the roof. (50)

The majority of the candidates outlined suitable general lay-outs, but the information required to show the packs between the various roadways and the support of a short length of face was often inadequate; the same remark applies to the transport of coal from the face to the main haulage.

(2) From a main level, in a seam dipping 1 in 3, an incline has to be driven on the full dip. A direct rope is to be used with a train of 15 tubs. Describe, with simple sketches, three methods of lay-out which can be used at the top of the incline to get the train from the incline on to the level expeditiously. (40)

The answers were most disappointing. The methods which were expected to be given were: (a) Blowing down the roof at the top of the incline to make a level sufficient to land 15 tubs which, of course, would necessitate a steeper inclination to get down to the seam dipping 1 in 3. (b) To continue the incline above the main level, then reverse the train on to a curved road until it meets the level. (c) To put in a curve from a point a distance down the incline terminating on the level.

(3) On faces 90 yards long dipping 1 in 5, where conveyors are used to bring the coal from the top to the bottom of the face, in some cases belt conveyors are used, and in other cases jigger conveyors. State, in detail, the reasons for and against each class of conveyor and conclude by stating upon which kind you would decide. (40)

Opinions were about equal as to which of the two types could be adopted under the conditions given. A great advantage of the belt conveyor is the absence of noise, but it is costly compared with the jigger. Except where safety is concerned, cost should have a bearing on the candidates' answers.

(4) Explain the geological terms: Exposed, concealed, and partly exposed, as applied to coalfields. Give examples. (40)

On the whole this question was well answered.

(5) Give descriptions of: (a) sheathed explosives and (b) the Cardox cartridge. Explain the full operation of blasting with the latter. (40)

The majority of answers showed full knowledge of both sheathed explosives and Cardox cartridges, but were very hazy as to the operation of blasting with the Cardox cartridge.

(6) What conditions would influence you in deciding to adopt the cementation process of sinking? Describe briefly the method of sinking. (40)

Most candidates understood the kind of strata where the cementation process could be successfully applied, but the descriptions of this method of sinking were generally unsatisfactory.

(7) Give a full description of how you would support the roof on a longwall face, having a hard roof and a moderately soft floor — (a) where the roof will gradually bend, (b) where the roof will break, but not bend. (40)

Many candidates in describing how to support the two classes of roof on a moderately soft floor omitted to make provision for the supports to yield where the roof would bend, whereas where the roof would not bend, but break off, the supports ought to be as rigid as possible so that the break will not take place on the face where men have to work.

Ventilation (1st Class).

(1) On the plan which accompanies this paper, show how you would arrange for the distribution of the air-currents, using the signs and colours as given in the Regulations. Sheets to be shown thus J. (50)

A proportion of candidates gave good arrangements, but more than half failed to produce a workable arrangement for the South side. In some cases every split in the mine was regulated, which is absurd.

(2) Give a short description of one of the recently developed flame safety-lamps, and enumerate its advantages. Give your views on the different methods of relighting safety-lamps. (30)

There were some very good answers. A good many candidates described the old types of flame safety-lamp. The re-lighting question was avoided in many cases.

(3) What is meant by the term "air horse-power" ? How would you proceed to calculate this, and what data would you procure in order to do so ? Give an instance, using, if possible, the figures of an actual case. Also show how you would calculate the mechanical efficiency of the installation you mention. (30)

This question produced good answers for the most part — the chief error being the introduction of the pressure figure twice over in the equation used.

(4) What difficulties are encountered in ventilating deep mines ? How would you ascertain the moisture content of the air-current in the working faces ? Explain the steps which should be taken to avoid any deleterious effect on the health of the workmen. Assume the seam to be at a depth of 1,000 yards. (30)

Many answers were very elementary — too much so for first class candidates. All treated the effect on the health of the workmen very well.

(5) A pair of shafts 600 yards deep are 20 feet in diameter, inside the walling. Calculate : (a) The area of each shaft (b) its rubbing surface. From the bottom of these shafts, a number of main roads have been driven to an average distance of one mile. Calculate (to the nearest whole number) how many of these roadways, each lined with splay steel arches, 8 ft. high, 8 ft. wide at springings, and 9 ft. 2 in. wide at floor, would provide an area (for the passage of the air-current) equal to that of the shaft. Afterwards compare the rubbing surface of these roadways with that of the shafts. Leave out of consideration the working faces. (30)

The answers were very disappointing in view of the fact that while practically every candidate got the areas and robbing surfaces of the shafts correctly, only a small proportion were able to calculate the area and rubbing surface of an arched roadway. In view of the general adoption of the arched girder, a candidate should be able to do this. The comparison asked for was well understood, but the arithmetic was inaccurate in most cases for the above reason.

(6) How would you conduct a ventilation survey of a colliery ? What are the principal difficulties encountered in obtaining a high order of accuracy in the results ? (30)

Most of the candidates answered as if their knowledge was confined to the detection of leakage alone. No candidate should be unaware of the benefit to be derived from the reading of comparative pressures. A minority had this knowledge and gave good answers.

(7) What circumstances affect the indication of the presence of firedamp in the air underground as shown on the flame of a safety-lamp? State how you would estimate the various percentages present by means of the lamp. What other means can be used for this purpose? (30)

Many confined themselves to describing the occurrence of firedamp underground, which was not the object of the question. Those echo dealt with the percentage indications did so satisfactorily. The at her means available for indicating gas were well described.

Explosions, Etc. (1st Class).

(1) Upon the occurrence of spontaneous combustion in a district of a mine, what conditions would necessitate the withdrawal of the workmen, and when may they be readmitted? (30)

The answers were generally satisfactory.

(2) Owing to an explosion and subsequent fire, a section of the workings in a fiery mine has been sealed off. Outline the considerations which should be given to the work of reopening, and state how you would proceed. (25)

The answers were very varied; some candidates failed to realise the great danger of admitting air to a section of workings in which there has been a fire until it is certain that there is no danger of re-starting same.

(3) Several seams of coal, averaging 6 ft. in thickness, are to be worked beneath the sea bed. The measures immediately beneath the sea bed consist of quicksands, 70 ft. thick, underlain with boulder clay 30 ft. thick down to the rock bed. The uppermost seam, which has a moderately good shale roof, lies at a depth of 160 yards below the sea bed. What precautions should be taken in working coal seams under these conditions ? (25)

Very few candidates attempted to answer the question, but the answers given were generally satisfactory.

(4) What precautions should be taken when building off a gob-fire to minimise the risk of a gas explosion? (25)

The importance of quick action and the proper sequence of operations are not sufficiently realised. Some candidates suggested reducing the amount of ventilation whilst the stoppings are being built, not realising that firedamp might increase to a dangerous percentage if this was done.

(5) What precautions should be taken when using coal-cutters and conveyors in a dry and dusty mine yielding firedamp: (a) To prevent an ignition of firedamp? (b) To prevent fires? (c) To prevent dangerous accumulations of coal dust? (25)

Most candidates answered this question, and gave good answers.

(6) A trained rescue team visits your colliery for the purpose of an underground practice. What kinds of work should be included in such practice ? (25)

Many good answers, but some candidates suggested work which was unnecessarily dangerous. Risks should not be undertaken by men wearing self-contained breathing apparatus when engaged on practice work underground. Practices are only intended to test endurance under mining conditions, and to give the men confidence in their apparatus for an emergency.

Machinery (1st Class).

(1) It is decided to adopt electric power at a colliery. The full load is estimated at 1,000 kw. and the maximum distance that power must be taken is two miles. State the type of electric power that you would adopt, the generating pressure, the transmission pressure and the pressure for motors of various sizes aiso the capacity and number of generator units. (28)

This question was often well answered. Some candidates would incorrectly generate at a high voltage and transform down for transmission. A number of candidates would install two generators each 500 kw. only for an expected load of 1,000 kw.

(2) In the case of alternators driven by steam turbines: (a) How is the voltage between phases adjusted? (b) How is an alternator started up and brought into parallel with the working alternators ? (c) How are the alternators protected against overload? (28)

A minority of candidates attempted this question. Few knew how to adjust the voltage of an alternator. More understood the operation of paralleling.

(3) Describe the principal features of switchgear for use in a fiery colliery for starting, controlling and protecting an induction 3-phase motor with wound rotor of, say, 100 b.h.p., the pressure between phases being 3.000 volts. (28)

Often well answered. Some candidates would take the supply current to the rotor. They are sometimes confused by the combination of a reversing switch for the stator circuit with a resistance controller for the rotor circuit.

(4) An incline is being driven down in a seam dipping 1 in 6 and is now 1,800 feet long. Water at the rate of 200 gallons per minute flows into the incline at a point 1,200 feet from the top, and below this point the inflow of water is 60 gallons per minute. Describe the equipment of pumps and pipes that you would install for raising the water to the top of the incline and for keeping the face clear for the work of advancing the incline. The type of power is open to choice. (28)

The description of the pumping outfits was often poor. Few candidates took the precaution of installing duplicate pump sets as standbyes. Mistakes were made in calculating the horse-power of the pump motors.

(5) In connection with multi-stage centrifugal or turbine pumps: What kind of packing is used to prevent the leakage of air into, or of water out of, the pump where the shaft passes through the casing? What is a lantern gland and how does it function? At what places inside the pump may leakage of water occur back towards the suction end? What steps can be taken to make a centrifugal pump more suitable for handling gritty or acid water? (28)

The question was not often attempted. Little seas known of the details of multi-stage turbine pumps asked for. The part answered best was the steps to be taken to make a turbine pump more suitable for handling gritty or acid water.

(6) Describe the apparatus that you would expect to find in a winding engine house apart from the engine proper, at a shaft about 300 yards deep. (28)

The chief defect was the mere enumeration of the apparatus to be found in a winding engine house, without any description.

(7) Describe a modern Lancashire boiler to evaporate 8,000 lb. per hour of water, using a poor quality fuel. Deal with dimensions, construction, fittings and mountings. Assume a working pressure of 150 lb. per square Inch. (28)

This question was answered by almost every candidate. The chief weakness exhibited was in the construction of the boiler. One candidate placed four or five fusible plugs at the bottom of the flue tubes.

(8) Two mild steel pipes, one of 6½ inches outside diameter, the other 4 inches outside diameter, are in line axially with their plain flange faces 18 inches apart. The flange on the 6½-inch pipe is 12-inch diameter, drilled with 12 holes for inch bolts on a 10¼ inches bolt circle. The flange on the 41-inch pipe is 9-inch diameter, drilled with eight holes for 5/8 inch bolts on a 7½ inches bolt circle. Make a drawing to a scale of one-quarter full size of a make-up pipe in mild steel to couple the two pipe ends. Show all necessary dimensions and particulars. (38)

This pipe was to be in mild steel. The chief defect was to show it as a reducer of even taper from one flange to the other. This could, of course, be done, but would be expensive. The common way would be to reduce the diameter at a given point in the length, so giving two parallel portions of different diameters. A number of drawings were good.


Related Articles

Pub.
Date
Article (Newspaper)
09 Aug 1935  Mining Examinations, Successful Candidates (The Colliery Guardian)
17 Aug 1935  Examination Results (The Science and Art of Mining)
31 Aug 1935  Notes On Surveyors' Examination, Central Examiner's Report (The Science and Art of Mining)
14 Sep 1935  May (1935) Examinations, Report of Central Examiners (The Science and Art of Mining)
28 Sep 1935  May (1935) Examinations, Report of Central Examiners (The Science and Art of Mining)
26 Oct 1935  May (1935) Examinations, Report of Central Examiners (The Science and Art of Mining)

 

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 28 Nov 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print