Logo Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Main Document Archive
Newspaper Articles
Articles by date
Articles by colliery
Personal name index
Local Record Extracts
D.M.A. Document Archive
Transactions of I.M.E.
Miners' Welfare
N.C.B. Archive
The Colliery Engineer
The Colliery Guardian
Mine & Quarry Engineering
Mining Journal
The Science and Art of Mining
Coal Magazine
Coal News
Coke and Gas
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious


 Newspaper Articles Index Newspaper Articles 

6th July 1935, Page: 408, Column: 2

Capels For Haulage Ropes

S.M.R.B. Paper No. 92, 1s. net, H.M. Stationery Office.

Further referring to S.M.R.B. Paper No. 92 by S. M. Dixon and M. A. Hogan (see page 394), on "The Deterioration of Haulage Ropes in Service," some notes are given on capels for haulage ropes. The Authors say the majority of the haulage ropes in Great Britain are fitted with some form of bent back wire capel, consisting of a cone, formed on the end of a rope by bending back the wires, which is held in a socket. In certain cases attempts have been made to improve on this capel by running in white metal around the wires, but as a rule this is only possible in the case of ropes which can be capped above ground, and in any event it is an expedient of doubtful value. Other forms of capel have been developed in which a conical steel plug, suitably grooved to fit the strands, is inserted in place of the fibre core at the end of the rope. When the cone formed by the strands and plug is drawn into the socket the strands are effectively gripped between the plug and the socket.

The Socket. — The socket, or body, of the capel is a very important member and should be designed to resist the forces to which it is subjected. The material to be used in making sockets should be in accordance with the standard specification (No. 323-1928). The most effective form of socket for gripping the cone on the end of a rope, whether formed by bent back wires, white metal or an internal plug, is a solid conical socket. For use with bent back wires the length of a socket should be ten times the diameter of the rope, the narrow end should allow a clearance of 1/16 to 1/8 inch over the rope diameter and the wide end should be approximately twice the diameter of the narrow end. Solid sockets for use with white metal do not require to be so long. Sockets for use with internal plugs should be designed to suit the type of plug being used, and will, in general, be shorter than those for bent back wires. Sockets for use with bent back wires or plugs must be of the "open" type, i.e., that in which the connection to the load is made by a pin passing through two lugs at the end of the socket. With this type of socket the rope can easily be drawn back into the conical portion after the cone has been formed at the end.

Preparation of a Cone of Bent Back Wires. — The various stages in the preparation of a cone of bent back wires are illustrated diagrammatically in FIGURE 1. The first step is to wind a tight layer of seizing wire on the outside of the rope beginning at a distance from the end equal to the length of the socket less ½ inch. The seizing should he 1 inch longer than the socket (A). At the end of the seizing nearest the end of the rope a cone should be built up of several layers of seizing wire. The wires at the and of the rope should be opened out and partly straightened, one-third of the wires should be cut to a length equal to two-thirds the length of the socket, and another third equal to slightly more than one-third the length (B). The cutting should be done evenly around the rope so that there are the same number of wires of each length from each strand. The shortest wires are then bent down on the cone of seizing and fixed in place by winding a layer of seizing wire over them (C). The medium length wires are then turned down and seized (D), followed by the longest wires (E). In this way a cone is produced equal in length to the length of the socket. The cone is drawn into the socket and a tapered pin of wrought-iron is then driven down into the core. The pin should be of a steeper taper than the socket, and the diameter of the wide end should be rather larger than that of the fibre core. The length of the pin should be from 3 to 4 times the diameter of the rope. Long pins are liable to deviate from the centre of the rope and penetrate the strands causing local injury. If the pin is driven in past the point where the wires are bent there will be no danger of its shaking loose in service.

The underlying idea in forming a cone of this type is that the rope should be gripped by pressure from the cone against the socket all along the length of rope in the socket. By the use of seizing wire the whole cone is made capable of yielding, thus preventing local concentration of load at any one point. If the cone operates as it should, all the load will be taken up by frictional gripping of the rope and no stress will be transmitted to the end where the wires are bent back over the seizing. The tapered pin is used because the low compressive strength of the fibre core would allow of an excessive amount of compression of the cone and a consequent tendency to slip through the socket.

The efficiency of this type of capel is dependent on the care with which it is prepared, and the results of tests on bent wire capels show considerable variations. In a series of tests on 21 such capels quoted in a report of a Committee of the Royal Commission on Mines (1908) the holding power varied from 33.2 to 80.9 per cent, of the strength of the rope. A capel made at the rope maker's works on a new langs lay rope with six strands of 9/9/1 construction on a fibre core gave a strength of 97 per cent. of that of the rope.

@

Seizing Wire. — The seizing of the rope should be done with soft iron wire of No. 12 or 14 S.W.G. Copper wire has frequently been used in the past, but its use introduces the risk of accelerated corrosion due to electrolytic action between the copper and the steel. Experiments have shown that rope wires bound with copper seizing wire deteriorated more rapidly by corrosion than those bound with iron seizing wire of the same size. The use of seizing strand made up of seven or more small wires whether of iron or copper is objectionable because the strand is likely to yield too much, thus allowing excessive compression of the cone in the capel with consequent slip. Apart from the ease with which it can be compressed, there is another serious objection to the use of fibre cord for seizing in that the fibre is hygroscopic and forms a reservoir for water, thus constituting a source of danger from corrosion. Whilst ordinary cordage does not usually contain any corrosive substances when new, tarred cord which has been treated with wood tar contains various organic acids and forms an active corrosive agent towards steel. Hence tarred cord should never be used with a steel wire rope for any purpose.

Protecting the Capel from. Corrosion. — Corrosion of the wires within the capel is a serious form of deterioration in haulage ropes. This trouble is less usual in winding ropes because any lubricant which may be put on the rope tends to flow down into the capel and sufficient usually remains to preserve The wires from corrosion. In many cases haulage ropes are not lubricated, and even if the rope be lubricated no oil may find its way into the capel. To prevent the entry of moisture and preserve the wires it is suggested that when a rope has been recapped a quantity of heavy grease should be run in whilst hot and allowed to solidify within the socket.

Bow Sockets. — In the older forms of capel it was usual to have a bow socket consisting of two side plates connected by a bow through which the pin of the tram shackle was passed. To enable the side plates to be closed on the rope cone it was necessary to render the bow flexible by heating it to a red heat. Heating of the rope wires is liable to reduce their resistance to repeatedly applied stresses and may lead to failure. The two side plates of a bow socket may be connected together either by rings on the outside or by rivets passing through the rope, but the use of rivets is not recommended. It is suggested that a solid type socket is preferable to either on the grounds of strength, reliability and weight.

Rings or Ferrules. — In many of the capels examined the wires had been bent back over wrought-iron rings or ferrules at the base of the cone, and in all cases deterioration occurred where the wires were bent over the ring. The use of a solid ring at the base of the cone defeats the whole object of this method of capping. The cone of bent back wires is formed with the idea of gripping the rope throughout the whole length of the capel, but once a ring is introduced all uniformity of pressure between cone and socket is destroyed. Broken wires are almost always found at the point where the wires are bent over a ring.

The use of a ring with a radial or scarfed joint might be thought to be less objectionable, but the Authors of Paper No. 92 have found the same type of deterioration with such rings. It must be remembered that there is always the possibility that a wire will enter the joint and prevent the ring from yielding. A cone built up of seizing wire is preferable under all circumstances.

The Use of White Metal with Bent Back Wires. — In some collieries it has been the practice to pour white metal into the large end of the socket after the cone of bent back wires has been drawn into place. It is claimed that the metal seals the end of the capel preventing the entry of moisture and thus preserving the wires from corrosion. There has also been an idea that the metal increased the reliability of the capel by providing a second grip for the wires. From the examination of a number of capels treated in this way it has been found that the metal does tend to protect the wires from corrosion, but instead of strengthening the capel it tends to reduce the resistance to repeatedly applied loads. It appears that with this type of capel deterioration by fatigue might he anticipated at the point where the wires are bent, and such deterioration has been found in several cases. It should be noted that these ill-effects are due to the combination of white metal with the bent back wire capel. In an ordinary white metal capel the wires emerge from the metal into their normal places in the rope and there is no tendency to reduce the fatigue resistance if the capel be properly made. But when white metal is used with a bent wire capel the fatigue resistance is reduced.


Names mentioned in this article

 

 Name  Age  Occupation  Notes 
Dixon, S. M.      
Hogan, A. M.      Whos Who Page


 

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 28 Nov 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print