Logo Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Main Document Archive
Newspaper Articles
Articles by date
Articles by colliery
Personal name index
Local Record Extracts
D.M.A. Document Archive
Transactions of I.M.E.
Miners' Welfare
N.C.B. Archive
The Colliery Engineer
The Colliery Guardian
Mine & Quarry Engineering
Mining Journal
The Science and Art of Mining
Coal Magazine
Coal News
Coke and Gas
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious


 Newspaper Articles Index Newspaper Articles 

22nd June 1935, Page: 391, Column: 2

Storage Of Coke

Mr. W. L. Boon, M.I.Mech.E., in his paper before the Institution of Gas Engineers on "The Preparation, Marketing and Utilisation of Coke," said that the storage of coke is a factor which causes considerable anxiety to the producer and the salesman alike. The amount of degradation and segregation which takes place at this stage makes it frequently the cause of complaint.

The discharge of coke from the screens at a high elevation into very deep bunkers is to be deprecated, because of the resultant excessive breakage. The degradation which is consequent upon storage is not only due to the discharge of the material from the screens into the bunkers in the process of tilling them and the breakage due to attrition of the pieces by rolling one upon another, but also to the fact that in the discharging of the fuel from the bunker itself a grinding action is set up accompanied by rotation of the pieces under pressure , this takes place practically throughout the whole mass when the exit gate at the bottom of the hopper is open.

The nature of coke is such that whilst it would appear impossible to eliminate breakage and dust formation entirely, it is practicable to reduce bunker degradation to a considerable extent. The use of spiral chutes for filling hoppers has undoubtedly proved of advantage as the system is growing in popularity, and it is logical to suppose that the necessity for some means of allowing the fuel to be deposited into the bunkers without the long drop must justify itself. One type of spiral is designed so that an equal discharge takes place from the root of the spiral and over the perimeter plate itself, so furthering the equal mixing effect of sizes, and tending to prevent in a marked degree the segregation which would normally take place if the discharge were made at a single point. An additional feature of this design is that it may terminate at the upper end of the inclined base of the hopper, and thus offer no restriction to hopper discharge.

A discharge apparatus which has been used with some success, consists essentially of a number of vertical members spaced around in a circle and directly over the hopper outlet. The distance apart of these vertical members is such that an arching action takes place from one member to another, which is strongest at the bottom and without effect at the coke surface. This results in discharge from the upper surface of the coke, permitting a free column of material to pass through the main body to the exit, the column constantly being replenished from above as the hopper discharges. As the action of discharge is such that sections from the coke surface pass continuously and directly towards the outlet, there is an automatic re-mixing of sizes so that any segregation that has taken place is to a certain degree readjusted.

For efficient utilisation of this device it is necessary that the coke should be placed in the hopper in a manner that precludes segregation as far as possible. It is obvious that otherwise the desired arching action between the vertical stay members may not take place. There is no difficulty in completely and cleanly discharging a hopper if the vertical members are spaced well clear of the hopper valley angles so that no obstruction to final discharge is made.

The provision of dc-breezing screens at the point of loading coke for distribution is necessary if a good product is desired, and power driven dc-breezing units are becoming more essential as the demand for a better and cleaner coke becomes more insistent. Whilst the static dc-breezing screens are still in use in a large number of plants, they are not as effective as the vibratory screens and suffer to a much greater extent from avalanching than does the mechanical unit.

In the majority of coke plants which have been erected within the last two years, dc-breezing screens of the power-driven type have been almost universally used. The fact that degradation may be substantially minimised by a filling and discharging device inside the bunker would not obviate the necessity for de-breezing prior to bagging, particularly when the domestic markets are being serviced. Further, the speedy loading which is to-day essential necessitates a high capacity screen.


Names mentioned in this article

 

 Name  Age  Occupation  Notes 
Boon, W. L.      


 

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 28 Nov 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print