|
27th April 1935, Page: 327, Column: 2 Collapsible Mine ChockConsisting of five principal parts a new collapsible chock has been patented by Mr. P. Kay, of Dudley, Northumberland, the parts being (1) The main structure, which is in the form of an open-topped box, rectangular in shape, with open ends which curve diagonally downward and outward. (2 and 3) The quadrant shaped load supporting members, which are placed one at each end. (4 and 5) The interlocking levers, which hold the load supporting members in position under load and release them when required. All the above-mentioned parts are made of best cast steel. The only other components are four mild steel bolts, two of which carry the load supporting members while the other two carry the interlocking levers. There are no chains, wedges, split pins or other small parts. The chock can be made in any desired size.
|
|||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 28 Nov 2022
|
Search |
|
|||