17th March 1934, Page: 283, Column: 2
Surveyor's Set Of Standards
In his presidential address at the annual meeting of the Midland
Counties branch of the Institute of Mine Surveyors, Mr. J. E. Leek
(Staveley Coal and Iron Co.) said that of the many spheres
of the application of science to industry, there was one of particular
interest to the mine surveyor-the greater accuracy with which
both linear and angular measurements might be obtained. The
demand for greater accuracy and efficiency in instruments ought
to come from the surveyor rather than from the manufacturer.
They must discriminate between mere change and progression.
Referring to the much discussed phrase, "standard of accuracy,"
the president remarked that since absolute accuracy was unattainable,
they must be satisfied with some degree of error. Every
responsible surveyor should fix definitely a set of standards for
himself and his staff. The institute, through its branches, should
co-ordinate these varying standards, and issue an official list of
minimum standards of accuracy. This would ensure that every
mine should have the opportunity of adopting a safe standard, and
the list would be a guide to young surveyors and students. If
such a list were incorporated in new surveying text-books, such
standards would soon be universally accepted as a safe basis.
The suggestion that the Legislature should be asked to substitute
a set of standards of accuracy for the term "accurate" in the
C.M.A. would be a profound mistake. The profession has progressed
rapidly of recent years because of the desire of the surveyors
themselves for a higher standard of accuracy.
Great progress had been made in correlating colliery surveys
to the ordnance grid. The surveyor had everything to gain by
it. The weakest link in the chain was the correlating of the surface
to the underground. With deeper shafts, larger royalties, and
localities where magnetic observations were entirely unreliable,
the problem still bristled with difficulties. Some means was
needed to provide a solution equal in accuracy to that obtained
by a footrule. Perhaps some day the scientist would come to their
aid with a directional ray which, when applied from the surface,
could be located at a definite point underground, or vice versa.
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Leek, J. E. | | Surveyor | |