Logo Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Main Document Archive
Newspaper Articles
Articles by date
Articles by colliery
Personal name index
Local Record Extracts
D.M.A. Document Archive
Transactions of I.M.E.
Miners' Welfare
N.C.B. Archive
The Colliery Engineer
The Colliery Guardian
Mine & Quarry Engineering
Mining Journal
The Science and Art of Mining
Coal Magazine
Coal News
Coke and Gas
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious


 Newspaper Articles Index Newspaper Articles 

23rd July 1932, Page: 2, Column: 1

Examination Questions

First Class (Mine Managers).*

1. — WINNING AND WORKING.

1. What are the particular difficulties associated with the working of deep coal seams? What methods could you suggest to minimise these difficulties ? (50)

2. Describe and give reasons for the various methods in which a shaker conveyor engine is connected to the conveyor troughs, and also the various methods of joining the troughs together (40)

3. Ordinary bituminous coal can be divided into four distinct visible constituents. Name these, and give a short account of each. (40)

4. Explain in detail how you would change a heavy winding rope used in a shaft 600 yards deep. (40)

5. In a district of a seam having a weak roof, state by what various means you would endeavour to control it at the coal face to the best advantage. (40)

6. Sketch and describe the arrangement you would install at the top of a sinking pit for expeditiously disposing of the debris. (40)

7. Under what conditions would you install (a) Longwall coal-cutters (b) Heading machines (c) Pneumatic picks Which type of longwall cutter do you prefer for general use, and why? (40)

2. — THEORY AND PRACTICE OF VENTILATION.

1. The plan of a mine, which accompanies this paper, represents workings hitherto ventilated by taking the air direct to the face of the main levels, and splitting it there — one split ventilating the whole of the rise, and the other the whole of the dip workings. There is difficulty in keeping the current in the last working faces clear, there being an extra issue of gas where the fault crosses the working faces. State what steps you would take to improve matters, showing on the plan the suggested improvements, the new directions of the air-currents, and the position of all air-crossings, doors, stoppings, regulators, and sheets, using the signs laid down in the Regulations. Sheets to be shown thus S (50)

2. Describe, with sketches, the essential difference between the Marsaut and Muesler types of safety-lamps. (30)

3. Discuss the use of steel arches on main ventilating roadways, stating what type of arch you prefer (Horseshoe, Straight sided or Splayed) and what steps can be taken to minimise friction. A roadway of this kind, lined with splayed steel arches, is 9ft. 6in. high in the clear, 12ft. wide at springing of arch, and the splay is 7in. each side (that is, the width of arch is 13ft. 2in. at floor). When the velocity of the air in this roadway is 450 ft. per minute, what is the approximate quantity passing ? (30)

4. State the various ways in which firedamp is given off in mines, giving a description of the phenomena connected therewith. At what periods would you expect the quantity to vary, and in view of this, what precautions should be taken to ensure safety ? (30)

5. Sketch and describe any type of main mine ventilating fan and housing to produce 200,000 cub. ft. of air per minute, giving only the principal features and dimensions (30)

6. A seam of coal has been sunk to, and struck to a depth of 1,200ft. in two adjoining shafts each 18ft. diameter. After these are connected in the seam, and the sinking fans are stopped it is found after a time that the temperature in the shaft which became downcast averages 62°F., and that of the other shaft 76°F. The barometer being at 30in., calculate the height of the motive column. Also make your estimate of the quantity of air produced, and the horse-power of this natural ventilation, showing the steps by which you arrive at this result. If it were decided to place a temporary partition across this air current's path so as to obtain a water-gauge reading, where would you place it so as to obtain a maximum result ? (30)

7. In ventilation, what is meant by the term coefficient of friction? State briefly what you know of the method of arriving at the proper figure to be used. (30)

3. — EXPLOSIONS, ETC.

1. A serious explosion occurs during a working shift, causing extensive damage. How would you organise, and carry out the rescue of survivors, and the examination of the workings ? (30)

2. Sketch and describe the construction of a concrete dam suitable to withstand a water pressure of 300lb. per square inch in a level roadway S feet wide by 6 feet high. There is a feeder of 200 gallons of water per minute flowing along the roadway. How would you deal with this whilst constructing the dam? (25)

3. How can breaks in roof strata contribute to an explosion of firedamp ? Make a sketch plan and section to illustrate your answer. (25)

4. For what purposes is the ordinary smoke helmet of use in coal mines, and what in your opinion are the limitations of its usefulness ? (25)

5. Electrically driven coal-cutting machines and conveyors are being used on a coal face. What special precautions should be taken in connection with the equipment, and in the working operations, to prevent an ignition of firedamp or coal dust? (25)

6. How do you account for spontaneous heating being more prevalent in some coal seams than in others ? What precautions should be taken in working seams liable to this danger ? (25)

4. — MACHINERY.

Electrical Section. — 1. Describe a 3-phase motor with squirrel cage — or short-circuited — rotor (say, for 50 h.p., at 440 volts and 50 cycles). State the classes of plant that may be driven by such a motor, and the methods of starting up. What are the devices that can be adopted — both internal to and external to the motor-to increase the torque at starting whilst keeping down the starting current ? (28)

2. In connection with electric power what is meant by the term power factor ? What may be the causes of a low power factor ? If a 3-core cable were carrying its maximum current of 300 amps at 0.6 power factor and 3,300 volts between phases, what extra power would be delivered if the power factor were raised to 0.8 ? (28)

3. A 3-core cable, paper insulated, lead sheathed and double wire armoured, carries 3-phase current at 3,300 volts, 50 cycles, to the bottom of a shaft. Describe switchgear and apparatus suitable for dividing the power into 5 circuits, 3 each of 100, and 2 each of 50 kilowatts capacity, the power being delivered to branch cables at 440 volts between phases. (28)

Mechanical Section. — 4. Describe one type of water-tube boiler, say for a duty of 10,000 lb. per hour of steam at 175lb. per sq. in. State in detail how the tubes are secured in the headers or drums so as to obtain a steam-tight joint. (28)

5. In connection with a centrifugal, or turbine, pump whose economical duty is 1,000 g.p.m., 700 feet high at 750 r.p.m., coupled direct to an electric motor — (a) If the speed is increased to 1,000 r.p.m., what is then the economical head and quantity per minute ? (b) If the motor were overloaded at the economical duty (1,000 g.p.m., 700 feet high) how could you reduce the load whilst maintaining the speed? (28)

6. The feeder of water to be pumped up a shaft 1,000 feet deep is 500 g.p.m. in winter and 250 g.p.m. in summer. Electric power is to be used. Reliability is important. Discuss the types of pump that might be used, and say which you would adopt, and in what numbers and capacities. Give reasons for your choice. (28)

7. The hand sketches on the separate sheet show a circular piston rod end and a portion of the crosshead into which it fits. The crosshead is to be secured to the rod by a cotter of rectangular cross-section. Draw in your answer book to a scale of one-half full size a sectional side-elevation on line BC of the crosshead in position on the piston rod. Choose and show the dimension A and state the width, length and breadth of the cotter, assuming that it is made with sides that taper only slightly. To save time, dimensions other than those asked for need not be shown. (38)

8. Give a list of the tackle, loose tools (heavy and light) and instruments that would be useful in erecting a winding engine with two steam cylinders on prepared foundations, no overhead crane being available. (28)

9. A steel winding rope is 1¼ inches diameter, and has a breaking strength of 65 tons. It weighs 2.5lb. per ft. The loaded, cage and attachments weigh 5 tons. The length of rope from the pithead sheave to the cage at the bottom of the shaft is 900 feet. Calculate the static factor of safely in the rope. If the acceleration is 3 feet per sec. sec., what is the actual factor of safety in the rope as the wind commences ? (28)

5. — SURVEYING, LEVELLING AND DRAWING.

1. Plan No. 1 on separate sheet, drawn to a scale of inch to 100 feet, , shows an enclosure, on the surface of which spot levels are indicated in feet above Ord. Datum. Sketch on the plan contours at vertical intervals of 5 feet, as accurately as the levels shown on the plan will allow. Take the lowest contour at 35 feet above datum. Thereafter plot a section along the line AB by direct projection from the plan, making the scale for verticals ten times that of the plan. (20)

2. Plan No. 2 — which is not drawn to scale — on separate sheet, shows by the letters CAB the proposed line of an aerial ropeway, part of which it is impossible to measure as it crosses an area of soft marshy ground. Given that the lines AC and AD measure 346 feet and 322 feet respectively, and the angles CAD and CDB are right angles, calculate the length of the line AB. (30)

3. A dipping cross-measures drift was driven at a gradient of 1 in 2, on the line of full dip of the strata, to recover a coal seam dipping 1 in 5, which had been thrown down by a fault. The roof of the coal seam was met by the floor of the cross-measures drift at a distance of 181 feet, and the floor of the coal seam at 201 feet. Calculate the thickness of the coal seam. (30)

4. A sinking shaft 610 yards in depth and 20 feet in diameter is flooded to within 350 yards from the surface. How long will it take to un-water the shaft with a sinking kibble 4 feet in diameter at the top, 3½ feet at the bottom, and 4 feet deep ? Assume the kibble to be filled to capacity each journey, and that, on an average, 15 journeys are made in an hour. There is no incoming feeder. (30)

3. The geographical azimuth of a line joining two triangulation stations on the surface is 357°39'30". By observation at 10 a.m. on consecutive days the magnetic azimuth of the line has been found to be 15°55'00". At the same hour on the two succeeding days the magnetic azimuth of an underground survey line was observed to be 58°58'00". What is the geographical azimuth of the underground survey line ? (20)

6. Plot the undernoted azimuth bearings by co-ordinates on a scale of 1 inch to a chain, and calculate the distance between A and B.

(30)

6. — GENERAL MANAGEMENT AND MINING LEGISLATION.

1. (Compulsory.) The Inspector of Mines for your district has drawn your attention, as Manager, to your annual return of accidents, showing an increasing number classed as "Underground Haulage Accidents." You are instructed by your Agent to make a full investigation and report. Write such a report showing the nature of the accidents classed under this head, indicating which are the most numerous, and make recommendations as to improvements which might be made with a view to lessening the accident rate. (30)

2. What are the qualifications and duties of an Electrician as set out in General Regulation 131 ? In what manner, and by whom must be be appointed ? (23).

3. Give a short summary of the "Additional Regulations for Sinking" contained in Part VI. of the General Regulations. (25)

4. Give a short summary of the General Regulations relating to the provision of Rescue Brigades at Collieries. To what mines do they apply and what exemptions may be obtained and how ? (25)

5. What are the Regulations relating to workings under moss, quicksand, etc. ? Explain exactly how you would ascertain if the thickness of the intervening strata is not less than the thickness required under the Regulations. (25)

6. Give a brief summary of Sec. 50 of the Coal Mines Act, 1911, relating to support of roof and sides. The Manager is required to "specify by notice the manner in which the supports are to be set and advanced and the maximum intervals to be observed on roadways between the supports, and at the face." Draw up such a notice as you would post for a seam with which you are familiar, stating the thickness of the seam and the nature of the roof. (25)


* Questions set at Examinations to May, 1932. The figures in brackets against each question indicate the maximum number of marks obtainable. The plans and sketches have not been reproduced. Complete sets of questions available through H.M. Stationery Office. 1s. 6d. net.


Related Articles

Pub.
Date
Article (Newspaper)
05 Mar 1932  Board For Mining Examinations (The Science and Art of Mining)
23 Jul 1932  Examination Questions, First Class (Mine Managers).* (The Science and Art of Mining)
06 Aug 1932  Examination Questions, Second Class (Under-managers).* (The Science and Art of Mining)
06 Aug 1932  Examination Questions, Surveyors' Certificate.* (The Science and Art of Mining)
06 Aug 1932  Examination Results (The Science and Art of Mining)

 

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 28 Nov 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print