|
5th March 1932, Page: 264, Column: 2 Early Steam EnginesA short but interesting paper on "Early Steam-Engines in the North of England" was read by Prof. Henry Louis at the February meeting of the North of England Institute of Mining and Mechanical Engineers. He reproduced a sketch of a steam-engine found upon an old plan at Tanfield Lea, dated 1715. It was shown in elevation, with the open-ended cylinder on top, the beam pivoted on the wall of the engine-house and the chimney placed at one side. It is quite evident, that this engine had been erected before the plans was made, because on the same plan another pit is shown with the words "intendd engine" written alongside it. In 1715, said Prof. Louis, the Tanfield Lea estate belonged to Gilbert Spearman, who also owned minerals at Washington. The sketch on the plan is probably one of the earliest sketches extant of a steam-engine, and seems definitely to corroborate the traditional statements recorded by Brand in his "History of Newcastle," 1789. There seems to be no doubt that this steam-engine was used solely for pumping water. Probably the earliest evidence of the use of the steam-engine as a winding engine appears on a plan dated 1749, and is of the Longbenton estate belonging to Lord Carlisle. The pit appears to be the Lane Pit, 58½ fathoms deep. There have also been preserved in the Watson Collection, Prof. Louis said, accounts referring to this estate, from which it appears that the cylinder was 47 inches in diameter, that the pit in question commenced to draw coals in 1747, and that for the years 1748, 1749 and 1750, the output approximated to 45,000 tons per annum. It appears that Longbenton Colliery was laid in about the year 1765 and that the plant Was sold. It seems to have been reopened by Lord Ravensworth and Partners about ten years later, and Smeaton in his reports, volume 2, page 435, states that he erected a "Ore engine" at Longbenton Colliery in 1777 "for raising water for the Water Coal gin" at the Prosperous Pit. The drawing of the engine running in 1749 shows a building with a chimney which undoubtedly housed the steam-engine, and that from this two winding-ropes went over overhead pulleys down the pit. Evidently in 1749 no means of converting reciprocating rectangular motion into circular motion had been devised excepting that of pumping up the water and allowing it to run over a water-wheel.
|
|||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 28 Nov 2022
|
Search |
|
|||