Logo Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Main Document Archive
Newspaper Articles
Articles by date
Articles by colliery
Personal name index
Local Record Extracts
D.M.A. Document Archive
Transactions of I.M.E.
Miners' Welfare
N.C.B. Archive
The Colliery Engineer
The Colliery Guardian
Mine & Quarry Engineering
Mining Journal
The Science and Art of Mining
Coal Magazine
Coal News
Coke and Gas
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious


 Newspaper Articles Index Newspaper Articles 

16th May 1931, Page: 337, Column: 1

Houghton Main Explosion

Official Report

At Houghton Main Colliery, Yorkshire, an explosion occurred on 12th December, 1930, in which seventeen men were burned by flames, seven of whom subsequently died from their injuries. This colliery employs approximately two thousand men, the Barnsley, Parkgate and Melton Field Seams being worked. The explosion affected a small portion of the latter seam. The Mines Department has issued a report (H.M. Stationery Office, 6d. net) by Mr. E. H. Frazer, H.M. Divisional Inspector of Mines, on the causes of and circumstances attending the explosion. Some extracts are appended.

The system of work adopted has become familiar as "intensive mining." that is, the work of cutting, pan shifting, ripping, packing and loading was arranged in a cycle designed to be completed in 24 hours so that in each working day a cut of 5 feet was taken off, producing about 700 tons for the two faces. Gates were supported by steel arches set right up to the ripping, those in the main gates being 11 feet wide and 8 feet high, inside measurements.

In Mr. Frazer's opinion, the system of work and support was well thought out and had achieved a good control over a difficult roof which had, in the past, been a source of serious trouble. Difficulty was, however, encountered when the systematic advance of the face was interrupted by idle days, one of which had occurred the day previous to the explosion, and by week-ends. There was then a tendency for the breaks in the roof to become wider and for the roof over the goaves to fall more heavily.

The Inspector's narrative of the accident describes the drilling of four holes in the ripping of 12's level with a compressed air drilling machine and a six feet drill. The first hole was at the left side to dress off a piece of side from the previous ripping shift. The second hole was in the new lift of ripping, which was intended to be 4½ feet thick and 11 feet wide, about 2 feet up and inclining a little upwards and to the left. The third hole was towards the left side, inclining upwards and to the left so that it would blast the left corner out. The fourth and the important shot-hole, began at 2 feet 2 inches up the ripping face and rose at a gradient of 1 in 2½. The mouth was 3 feet to the right of the centre line of the gate and the hole was inclined at 1 in 5 to the right.

Mr. Frazer is definitely of the opinion, and the Jury reached the same conclusion, that the firing of the fourth shot in the ripping of 12's level was the cause of the explosion. In his opinion the shot-hole was bored through a small break and through or up to a large one. The deputy strenuously denied that he detected any break in this hole, but there is some evidence that he put clay into the hole before inserting his charge, as though to plug up a break. No suspicion of such a procedure was aroused until Mr. George Cook found during the afternoon of 12th December a 12-inch length of an old shot-hole filled with clay.

Mr. Frazer is convinced that a proper examination made between firing the third and fourth shots would have prevented the fatal shot being fired. In regard to the presence of firedamp at the ripping in the cavity made by firing the third shot, it was proved that this gas could have come through a break from an accumulation in the goaf. No doubt it would take a little time for this to occur, in view of the small difference in pressure between the goaf and adjoining gate, and it. would not be detected in the ripping immediately after the third shot had broken through to the break and thereby uncovered a passage. An examination in the ripping immediately before firing the fourth shot, as required by Clause 6 (f) (i), would probably have shown gas, whereas one several minutes previously would have found the air clear. If the examination had been made as required — that is immediately before the shot was fired and made in accordance with Clause 6 (f) (i) — the deputy would not have fired the shot. It must he concluded either that the naked light of the explosive reached an explosive mixture in a break at the back of the shot-hole or that the explosive compressed such a mixture in the break up to ignition point.

Mr. Frazer concludes his report as follows :—

The Jury believed a longer time should be allowed between shots With the law as it stands, Mr. Frazer is in complete agreement with this view. The interval between the tippers arriving at the face and the explosion occurring was only 1¾ hours. In that time four holes had been bored and fired. At a generous computation, the interval between the firing of the first and fourth shots could not have exceeded 45 minutes. A reasonable time should be allowed for fumes to disperse and for a complete examination to be made for gas. For ripping shots this examination necessitates the shot-firer going underneath the ripping in which a shot has been fired, and from which timber has been withdrawn, or else he has to travel into and out of the face some other way. In the case of each shot at Houghton Main Colliery in 12's ripping it would have necessitated a walk of 1,300 yards in roads and 170 yards in conveyor faces — an impracticable proposition. The proper thing to do would be to pluck the loose stones at the ripping after each shot and to set sufficient temporary timber to be a safeguard whilst travelling backwards and forwards under the ripping. This would mean a delay which would enable any gas which was collecting to make itself manifest. A deliberate policy of enforcing an interval of not less than half an hour between consecutive shots in a ripping would tend to greater safety and is to be commended.

The Jury's suggestion of testing a hole for breaks by means of air pressure or suction is one which had for some time previously been occupying the mind of Major H. J. Humphrys, Senior Inspector, who, with the assistance of the Manager of Cadeby Main Colliery, had made some trials, it was found that merely by placing a handful of stone dust in a shot-hole and applying pressure from the compressed air range the dust was blown out of breaks which had not been observed by careful testing with the aid of a scraper. This proposal requires further investigation.

Clause 6 (d) of the Explosives in Coal Mines Order prescribes that a shot-firer shall examine every shot-hole for breaks running along and across, but does not specify in what manner the examination shall be conducted. Hitherto a scraper has been considered an indispensable tool for such examinations, but it has been pointed out frequently that an ordinary scraper is not of much use for detecting breaks running along a hole and that one end of a scraper should be made spoon-shaped whilst the other should have a chisel edge running longitudinally along the tool. Both ends would require to be used in a hole. This is, Mr. Frazer is afraid, more than the average shot-firer is accustomed to do when examining a hole for breaks but, if performed conscientiously, would prevent breaks from being undiscovered. A suggestion that shots should only be fired from a distance when no one is in the vicinity of the shots has attractions. In thick rippings or in faces where shots are fired in coal at intervals of a few feet, it would necessitate firing shots in series, which is at present forbidden except in stone drifts and sinking pits. The question whether such a method of firing would lead to more accidents from miss-fired shots and scattered cartridges is one which would have to be carefully considered.


Names mentioned in this article

 

 Name  Age  Occupation  Notes 
Cook, George    H.M. Inspector of Mines  Whos Who Page
Frazer, Edgar Hamilton    H.M. Divisional Inspector of Mines  Whos Who Page
Humphrys, Herbert John, Major    H.M. Senior Inspector of Mines  Whos Who Page



Links to Collieries/Mines mentioned in this article

 

Houghton Main Colliery  Houghton Main Colliery



Related Articles

Pub.
Date
Article (Newspaper)
27 Dec 1930  Houghton Main Explosion (The Science and Art of Mining)
16 May 1931  Houghton Main Explosion, Official Report (The Science and Art of Mining)

Links to related pages

 

Colliery Page  Main page for Houghton Main
Disaster Page  Accident/Disaster Page

 

 

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 28 Nov 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print