Logo Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Main Document Archive
Newspaper Articles
Articles by date
Articles by colliery
Personal name index
Local Record Extracts
D.M.A. Document Archive
Transactions of I.M.E.
Miners' Welfare
N.C.B. Archive
The Colliery Engineer
The Colliery Guardian
Mine & Quarry Engineering
Mining Journal
The Science and Art of Mining
Coal Magazine
Coal News
Coke and Gas
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious


 Newspaper Articles Index Newspaper Articles 

7th February 1931, Page: 231, Column: 1

Examination Questions

Surveyors' Certificates

Morning Session. — 1. The plan on separate sheet shows details taken from a geological survey map on scale of 6-inch = 1 mile, including a general section showing the relative positions of the several seams, the outcrops of which are shown. Draw a section on the line A B to the same scale as the plan, showing the surface contour and the coal and shale seams. Assume a thickness of 30 feet of alluvium overlying the rockhead, and that the maximum depth of the reservoir is 30 feet at the centre. State briefly your views regarding the geological structure of the area shown on the plan, and in particular the direction and approximate amount of throw of the fault marking the eastern boundary thereof. (12)

2. A hexagonal bar 3 inches long, with sides 1 inch, lies with one of its faces on the horizontal plane. The axis of the har makes an angle of 45° with the vertical plane. Draw a plan and elevation of the bar, full size, in true projection, showing clearly all projection lines. (10)

3. Part of a colliery leasehold has surface composed of water bearing sand and gravel of considerable and variable thickness. Workings in a seam lying at comparatively shallow depth are approaching that area. State how you would determine the extent of the area that could be worked free from the restrictions imposed by the General Regulation dealing with workings under moss, etc. (10)

4. The output from a colliery during a period of 12 months has been obtained from three separate areas. Undernoted are the details taken from the plan showing the extent of the three areas worked and the average thickness of the coal worked from each area.

Average Ac, dec. thickness. Area (1) 6.415 at 44.7 in. (2) 9.520 at 49.4 in. (3) 3.675 at 55.0 in.

Lordship or royalty is payable at the rate of £2 15s. per inch per acre on the average thickness over the whole area worked each year. Calculate the average thickness, and the amount of royalty payable for the year. (8)

5. State how you would proceed to lay off a railway curve of 10-chain radius, if no theodolite was available, and you were limited to the use of chain, offset tape, and ranging poles. Assume that you start from a straight stretch of railway line. (8)

Afternoon Session. — 1. The following survey was made with a theodolite graduated clockwise. The instrument was set at 360° for each back-sight and the distances were measured on the slope.

Angle of Distance Observed angle. inclination in feet. AB + 8° 288 A B C .. 43°55'15" BC - 18°10' 139.3 B C D .. 313°11'40" CD -i- 29°30' 347.8 C D E .. 264°15'°20" DE - 14°15' 250

Assume AB to be bearing N. 87 degrees 30 minutes E. It is proposed to drive AB further ahead on the same bearing and gradient until it meets a level stone drift to be driven from the point E. Calculate the bearing and length of the drift to be driven from E to meet AB produced. (12)

2. A colliery leasehold is approximately 5,000 acres in extent. It is worked by two shafts, each 18 feet in diameter, approximately 300 fathoms in depth, 90 feet apart, and the working faces are 1½ miles distant therefrom. Assume only one seam is being worked. You are asked to carry out a precision survey with the object of correctly determining the position of the workings in relation to the surface lines. State fully how you would carry out the required survey. (12)

3. The main intake airway in a mine is 14 feet in width, with side walls perpendicular to the floor, each 6 feet in height. The roof is in the form of an arc of a circle, with radius equal to a line joining a point on the floor midway between the two walls and the top thereof. If the velocity of the air-current is 9 feet per second, find the volume of air passing per minute. (8)

4. The respective distances in links of two points C and D on and from the Ordnance meridian are as follows :—

C 29856 N. and 6207 E. D =21917 N. and 8642 E.

Two points, A and B, have been selected to the east of the line DC, B being the farther north, and the undernoted angles have been measured :—

B A D 119°45' A B D 28°16' B A C 33°54' A B C = 125°00'

Calculate the length and bearing of the line AB. (12)

5. Describe fully, but concisely, two methods of determining surface contours, stating the advantage and disadvantage of each. Give specimen bookings of each method. (8)

6. A level has been set up on sloping ground equidistant from two Sopwith staves. A reading to the dip staff gives 6.72, and another to the rise staff gives 368.- The instrument is then moved 30 feet beyond the rise staff, from where further readings of 8.48 and 5.24 to the dip and rise staves respectively are obtained. State clearly how you would carry out the necessary adjustment on the instrument. (8)

7. A colliery debris heap is about to be leased for brickmaking purposes. Lordship is payable thereon at 2d. per cubic yard and is to be determined half-yearly by measurement. The heap varies from 25 to 40 feet in height, and is deposited on undulating ground with a plan area of approximately 10 acres. State clearly the method you would adopt to ensure half-yearly measurements being obtained. (8)


* Questions set at Examinations in Nov., 1930. The figures in brackets against each question indicate the maximum number of marks obtainable. The plans and sketches have not been reproduced, Price of official copies of questions available through H.M. Stationery Office, 1s. 6d. net. Continued from page 217, No. 14, Vol. 41.


Related Articles

Pub.
Date
Article (Newspaper)
06 Sep 1930  Board For Mining Examinations (The Science and Art of Mining)
24 Jan 1931  Examination Questions, First Class (Mine Managers)* (The Science and Art of Mining)
07 Feb 1931  Examination Questions, Second Class (Under-managers)* (The Science and Art of Mining)
07 Feb 1931  Examination Questions, Surveyors' Certificates (The Science and Art of Mining)
21 Feb 1931  Examination Results (The Science and Art of Mining)

 

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 28 Nov 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print