Logo Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Main Document Archive
Newspaper Articles
Articles by date
Articles by colliery
Personal name index
Local Record Extracts
D.M.A. Document Archive
Transactions of I.M.E.
Miners' Welfare
N.C.B. Archive
The Colliery Engineer
The Colliery Guardian
Mine & Quarry Engineering
Mining Journal
The Science and Art of Mining
Coal Magazine
Coal News
Coke and Gas
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious


 Newspaper Articles Index Newspaper Articles 

24th January 1931, Page: 216, Column: 2

Examination Questions

First Class (Mine Managers)*

1. — WINNING AND WORKING.

1. An output of. 800 tons of coal per shift is to be won from a level seam 5 feet thick, with a good roof and floor, to be got by hand. Sketch a longwall layout plan to yield this quantity, and state the number of firemen and colliers you would expect to employ during the coal-getting shift. Draw up a set of rules regarding roof supports which you would consider to be suitable for this seam. (50)

2. Describe the different irregularities which occur in the continuity of coal seams, and say how these have been caused. (40)

3. It is found that the proportion of large coal being made in a seam under your charge is too low. What reasons can you give for such a state of affairs, and what suggestions can you make to reduce the amount of small coal? (40)

4. Describe, with sketches, a switch and other suitable contrivances for preventing accidents in the event of tubs running away in an incline. (40)

5. Why is better work done by a shot if the detonator is placed next to the stemming instead of at the back of the hole? Why is it advisable to have as few cartridges in a hole as possible, and what practical difficulties are there against giving an order to have only one cartridge in any shot? (40)

6. Describe, with the help of a few sketches, the method you would use for putting down a borehole: (a) for an artesian well 60 feet deep; (b) for prospecting in coal measures to a depth of 200 yards. (40)

7. What is an arcwall machine? Under what conditions can it be successfully applied? Illustrate your answer by a sketch. (40)

2. — THEORY AND PRACTICE OF VENTILATION.

1. On the plan of a mine, which accompanies this paper, show how you would ventilate the working places. Mark the direction of each air-current; also indicate clearly the positions of air-crossings, doors, stoppings, regulators and sheets, using the signs laid down in the regulations. Sheets to be shown thus S Coal is to be wound at the downcast shaft only. (50)

2. A new colliery, expected to have a large output, has two shafts each 21 feet diameter. They are spaced 60 yards apart and will be approximately 500 yards deep. State what plant you would install for ventilation, with particulars of the means of driving it. (30)

3. In the workings of a fiery seam, state your opinion as to the proportion of flame and electric lamps you would use, giving your reasons. In the case of a seam known to be subject to sudden outbursts of gas and coaldust would you vary these arrangements ? (30)

4. Describe a Sirocco mine fan, with a sketch of the runner and vanes, showing the direction of rotation. (30)

5. State fully how you would examine the current of air in a main return in order to ascertain the proportion of firedamp. (30)

6. In recent years, steel arch supports have been used for roadways underground with considerable benefit to the ventilation. State how, in your opinion, this has arisen, compared with a timbered roadway; and give suggestions of methods by which this benefit can be increased. (30)

7. What, approximately, is the weight of air circulated in a colliery with which you are acquainted as compared with the weight of coal produced? What weight of air per 24 hours is passed through a mine by a fan producing a velocity of 1,000 feet per minute in a shaft 20 feet diameter? (30)

3. — EXPLOSIONS ETC.

1. Enumerate the possible causes of colliery explosions. State the precautions that a colliery manager should enforce to guard against the risk of such occurrences. (30)

2. On making the statutory inspection before the commencement of a working shift, the fireman or deputy discovers a fire in the return of a pair of narrow headings or winnings, How might such an occurrence be accounted for? What steps should the fireman take in such an emergency? (25)

3. What references should be shown on the plans of abandoned workings in all cases, and what additions do you consider should be made (a) Where seams are inclined at 60 degrees to the horizontal, or over? (b) Where a stone drift has been driven from one seam to another and intermediate seams have been intersected? (25)

4. What are the principal dangers likely to be encountered in exploring and restoring underground workings after an explosion, and what precautions should be taken against them? (25)

5. A dam is required in' a level cross-measure stone drift to resist a heavy pressure of' water. Draw a hypothetical section, showing the strata between two seams 70 yards apart. Mark the site you would select, and describe the preparations necessary for a dam 7 feet wide by 6 feet high. Describe, and illustrate by sketches, how you would construct the dam of brickwork with provisions for a stream of water to flow through the dam during construction. (25)

6. State what, in your opinion, is the origin of spontaneous heating. Give a brief account of any one case of which you have had experience, and how it was dealt with. If you have not had actual experience, state how you would proceed to deal with a case of spontaneous heating. (25)

4. — MACHINERY.

Electrical Section. — 1. What are the kinds of electric cable available for placing in a vertical shaft to convey electric power underground, say 750 kw. at 3,800 volts, three-phase? Give a description of the construction of the kind that you would choose. (28)

2. State the differences between a synchronous motor (with salient poles) and an induction motor — both for three-phase 50 cycle current. How would you ensure a speed of about 730 revolutions per minute in an induction motor? (28)

3. Describe a switchboard and its equipment for controlling a three-phase alternator (say 1,000 kw. at 3,000 volts). (28)

Mechanical Section. — 4. Give a detailed description, with dimensions, of the body (only) of a steel tub (tram or hutch) known to you. Make detail sketches, with dimensions, to show how the plates forming the sides, ends and bottom are joined together and how the body is reinforced.. Should you not know of a particular steel tub, choose for description one having a body 4 feet 6 inches long, 3 feet wide and 2 feet 6 inches deep, outside dimensions. [Note. — The sketches are the important part of this question.] (38)

5. A steam engine is wanted for driving a coal screening plant by a belt running at 1,500 feet per minute. The steam pressure available at the stop valve is 110 lb. per square inch. The brake-horse-power is 50. Draw up a specification of the engine that you would choose, giving in particular the bore and stroke of the cylinder (or cylinders), and the revolutions per minute. (28)

6. Tubs are to run on a self-acting incline, the descending set of full tubs hauling up. a set of empty tubs. The tubs tare 600 lb. and carry 1,200lb. of coal. The rope is 5/8-inch diameter, weighing 1.25 lb. per foot. The gradient is 1 in 12 and the run is 300 yards (total length of rope. 352 yards). Taking tub and rope friction at 63 lb. per ton, what is the least number of tubs per set or per journey that could be run.(28)

7. Describe a steam turbine, say for coupling direct to a 1,000 kw. alternator. Deal, among other things, with the blading, the governing, and the prevention of leakage of steam. (28)

8. Give a list of the fittings likely to be found on a modern water-tube boiler, also of the accessory apparatus installed in the boiler house for giving and recording information on the performance of the boiler. (28)

5. — SURVEYING, LEVELLING AND DRAWING.

1. The plan on separate sheet shows part of the boundary line between two colliery leaseholds. Workings in No. 1 leasehold have proved the line of a fault AB with hade of 30 degrees from the vertical, which is known to throw the strata 20 fathoms down to the south. It is proposed to make an exchange of areas whereby the area to the north of the fault in No. 2 leasehold will be transferred to No 1 leasehold in return for an equal area of coal to the south of the fault in No. 1 leasehold. Transfer the leasehold boundary and line of fault to your answer book by pricking through, and lay down thereon an area in No. 1 leasehold immediately to the south of the fault to comply with the above conditions. Assume that the fault maintains the same line in No. 2 leasehold, and that the strata are level throughout. (30)

2. The co-ordinates of two points B and C in relation to a point A are as follow :— B 380 feet North 142 feet East. C 520 feet North 824 feet East.

Find by construction the radius of a circular curve passing through the three points A, B and C. (25)

3. Level figures shown on a mine plan at intervals of 100 feet along a haulage roadway are as follow :—

At A 110 feet above Datum. 100 from A 115.5 200 ,, 119.0 300 ,, 122.5 400 ,, 120.5 500 ,, 118.0 600 ,, 119.0 ,, B

Plot a section from A to B on a scale of 1 inch = 100 feet for horizontals, and 1 inch = 10 feet for verticals. Calculate the quantity of material to be removed in order to give a uniform gradient from A to B by cutting the floor. Assume the width of road to be 10 feet. The depth of cutting at each 100 feet interval is to be calculated, not measured from the section. (30)

4. State, in acres, roods and poles, the contents of an area measuring 4 square inches on each of three plans drawn to a scale of 1/1584, 1/2500 and 1/10560 respectively. (25)

5. The main intake airway in a mine is 14 feet in width, with side walls perpendicular to the floor, each 6 feet in height. The roof is in the form of an arc of a circle, with radius equal to a line joining a point on the floor midway between the two walls and the top thereof. If the velocity of the air-current is 9 feet per second, find the volume of air passing per minute. (30)

6. A colliery plan shows an area of 13¾ acres of coal to have been worked in a year from a leasehold in which the royalty is £2 15s. per inch per acre. If the average thickness of the seam worked be 64.75 inches, and a deduction of 5½ per cent. is allowed for colliery consumption, what is the amount of royalty payable for the year? (25)

6. — GENERAL MANAGEMENT AND MINING LEGISLATION.

1. Compulsory Question. — You are instructed to report to your directors on the support necessary to be left for an important property on the surface. Explain in the report what investigations you would make as to the physical conditions of the strata and what considerations you would take into account. (30)

2. State concisely the provisions of the Coal Mines Act, 1911, and the General Regulations applying to the examination of (a) Flame safety-lamps; (b) Electric safety-lamps; and explain from the point of view of safety, the advantages and disadvantages of each type. (25)

3. Certain percentages of gas are mentioned in the Coal Mines Act, 1911, and General Regulations. In what connections are the following mentioned? (a) One-quarter per cent.; (b) One-half per cent. ; (c) One and a quarter per cent. (25)

4. Give a list of books and documents, to contain records, required by the Coal Mines Act, 1911, and the General Regulations, to be kept at the office of a mine. (25)

5. A fireman or deputy in charge of a district discovers, in the course of his rounds, the presence of inflammable gas in a top ripping. Describe in detail what steps he should take in compliance with the Coal Mines Act, 1911, and General Regulations. (25)

6. State (a) the requirements of the Coal Mines Act, 1911, as to the provision of two main intake airways; and (b) the exemptions authorised by the General Regulations applying thereto. (25)


* Questions set at Examinations in Nov., 1930 The figures in brackets against each question indicate the maximum number of marks obtainable. The plans and sketches have not been reproduced. Price of official copies of questions available through H M/ Stationery Office, 1s. 6d. net.


Related Articles

Pub.
Date
Article (Newspaper)
06 Sep 1930  Board For Mining Examinations (The Science and Art of Mining)
24 Jan 1931  Examination Questions, First Class (Mine Managers)* (The Science and Art of Mining)
07 Feb 1931  Examination Questions, Second Class (Under-managers)* (The Science and Art of Mining)
07 Feb 1931  Examination Questions, Surveyors' Certificates (The Science and Art of Mining)
21 Feb 1931  Examination Results (The Science and Art of Mining)

 

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 28 Nov 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print