|
22nd March 1930, Page: 288, Column: 2 Links Between Socket And Cage ChainsAt the meeting of the North of England Institute of Mining and Mechanical Engineers on the 22nd of February, Mr. Charles Howson submitted a paper on "Notes on a Winding Accident at Mainsforth Colliery, 31st December, 1928." He said in the course of his paper that the "accident was due to the failure of a link connecting the shackle of the rope socket to the shackle of the detaching hook. The ascending cage, fully loaded with four tubs of coal, fell about 30 fathoms to the pit bottom. The link that failed had been in use for some years and had been annealed a few days before the mishap. It was made of iron 2¾ inches in diameter, and as the dead load on it was 10.1 tons it was expected to have a sufficiently high factor of safety. A thorough investigation of the cause of the failure with a view to the prevention of a similar accident was made, and a series of tests of links and shackles of the sizes in use at the colliery was also made. The fractured ends of the link that failed revealed a defective weld for nearly 50 per cent. of the sectional area, but the defect was in such a position that it was impossible to see it when the link was heated up in the annealing furnace. The fact that such a weakness could exist in a link which was, as far as could be seen, thoroughly sound, made it obvious that the use of any links at all between the socket and the cage chains is undesirable, and their use has been dispensed with at Mainsforth Colliery." Mr. Howson gave the results of some tests and concluded by saying that "the failure in question and the subsequent tests force one to the conclusion that welded links unless used in multiples are untrustworthy."
|
|||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 28 Nov 2022
|
Search |
|
|||