|
19th October 1929, Page: 101, Column: 1 Science And IndustryAt the annual meeting of the Governors of Armstrong College, Dr. Cecil A. Cochrane, the chairman, referred to the regret that they all felt concerning the official severance of Sir Theodore Morison's connection with the College, whose affairs he had supervised over a period of ten difficult years. He was confident that the Governors would join him in giving Sir William Marris, the new principal, a cordial welcome. In the course of his report, Sir Theodore Morison said that while he rated very highly the help which science can give to industry, he did not forget that the distinction between a scientific problem and an industrial problem should always he home in mind. "The man of science can indicate certain lines which might with advantage be explored; he can in certain cases undertake a general supervision of technical research, but it is not in his competence to state a commercial proposition, he cannot give the manufacturer a formula for solving his financial difficulties; the problem of turning a scientific discovery into marketable goods must be worked out in the factory, not in the laboratory." Suggestions with regard to the training of metallurgists were made by Mr. W. C. Gray, in his presidential address to the Birmingham Metallurgical Society. He said it was desirable there should be closer co-operation between the industry and the universities, but they should not forget that the proper function of the universities was to provide the broad foundation of knowledge of general principles. If, to meet the requirements of industry, the graduate required a more practical experience, this should not be attempted in the universities. Practical training, such as was required by industry, could only be acquired in the works, and he suggested here was an excellent opportunity for the co-operation of industry with the universities. He was of the opinion that every student should spend six or twelve months in a works before he was allowed to graduate. Most of the period would be completed during the vacations and the time should not be spent in the laboratory. This method — a sort of sandwich system — would allow the student to become familiar with a certain amount of detail and would bring him into contact with the mentality of those whom some day he might have under his charge. He would obtain an insight into industrial methods and management and would be more fitted to take up a position of responsibility in a works when he had graduated. Metallurgy had made such rapid progress during the present century that it was impossible for any professor of metallurgy to keep abreast of all developments in metallurgical practice and to make himself acquainted with the details of every technical process. The training of works youths was likely to receive more consideration in the future. While the grouping together of industry-was not a new phase its application to the heavy industries was a comparatively recent one. They naturally expected that one of the results of this grouping into large units would be increased efficiency, and he thought they might also expect to have closer association between science and industry. It was possible they would make their own educational needs the subject of a thorough examination, and if they did so the question of the training of their technical staffs would sooner or later be raised. The formation of big businesses would help naturally to pave the way for a closer co-operation between the universities and industry. The demand for research workers was met almost entirely by the universities, but it was a mistaken idea that they were the product of university training. It was a gift to be able to research, and only a proportion of the students who graduated were capable of real research. Research was essential if progress was to be made. In his presidential address to the Staffordshire Iron and Steel Institute, Mr. Percy Jump said that within the area of that body the many diverse trades associated with the iron, steel, and coal industries were experiencing the keenest competition, and whether it was this keen competition, or because the industries were poorer or wiser, it was a fact that greater attention was being paid to-day to the utilisation of waste products. Craftsmanship alone could not survive; scientific management had to come to its aid. Waste should often be considered as surplus, and the waste or surplus of one industry might form the raw material of another. Consequently the study of the utilisation of waste products opens up a wide field of investigation. The consideration of furnaces using solid fuel in the form of coal or coke, raised the important question of the rescue of combustible matter from furnace ashes, as the losses due to unburnt fuel might be considerable. These losses would of necessity vary greatly according to the class of coal used, and the efficiency of each individual furnace. The statement had been made that subject to the clinkers and ashes or breeze containing more than 5 per cent. unburnt fuel, the rescue of such fuel was a commercial proposition. In a works employing a very simple method of rescue by flotation it had been found that the rescued gleads were approximately 25 per cent. of the total material washed, the material washed being the waste from the coal fired furnace and smiths' hearths after a preliminary dry sorting of fine and unsuitable material.
|
|||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 28 Nov 2022
|
Search |
|
|||