Logo Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Main Document Archive
Newspaper Articles
Articles by date
Articles by colliery
Personal name index
Local Record Extracts
D.M.A. Document Archive
Transactions of I.M.E.
Miners' Welfare
N.C.B. Archive
The Colliery Engineer
The Colliery Guardian
Mine & Quarry Engineering
Mining Journal
The Science and Art of Mining
Coal Magazine
Coal News
Coke and Gas
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious


 Newspaper Articles Index Newspaper Articles 

18th May 1929, Page: 346, Column: 1

Boring Against Workings Containing Water

Negotiating a Fault

By C. H. Leeds.*

Boring Against Workings Likely to Contain an Accumulation of Water or Other Liquid Matter. — The conditions under which boring, on certain defined lines, is required by the provisions of the Coal Mines Act, 1911, Section 68, may differ so greatly in detail that precautions which are ample in one case may prove to be entirely inadequate in another. It is not, therefore, my intention in these notes to endeavour to present an infallible method of boring when approaching workings likely to contain water or other liquid matter, but rather to indicate the lines on which the necessary boreholes should be set out in order to guard against accident. Section 68 of the Coal Mines Act, 1911, provides that : "Where any working has approached within forty yards of a place containing or likely to contain an accumulation of water or other liquid matter, or of disused workings (not being workings which have been examined and found to be free from accumulations of water or other liquid matter), the working shall not exceed eight feet in width, and there shall be constantly kept extending to a sufficient distance, not being less than five yards, in advance, at least one borehole near the centre of the working, and sufficient flank boreholes on each side at intervals of not more than five yards."

It is unnecessary to dwell upon the inadequacy of this provision in so far as it refers to flank boreholes. It has always been self-evident to any experienced mining engineer. So far as regards the front borehole, however, a definite minimum length of hole in advance of the working is laid down, and very little more. The question of additional front holes is left entirely to the discretion of the mine manager. tinder normal conditions more than one front hole is unnecessary, provided that this hole is situated in the centre of the place, and accurately bored. The working within 40 yards of the anticipated accumulation of water must not exceed 8 feet in width, and the front hole must not at any time be less than 5 yards in advance of the face.

In boring against old and unknown workings we should be prepared to anticipate the encroachment of places of not greater width than 8 or even 6 feet, and taking into consideration the possibility of the latter width, the system of boreholes should be so arranged that no old working of more than 6 feet in width can exist within 5 yards of the boring place without being detected by one or other of the boreholes. In other words, along an imaginary line 5 yards from the face anti extending to a distance of 5 yards on each side of the place the system of boreholes must cut this line at a distance not exceeding 6 feet between any two holes. Assuming that in a fairly horizontal seam with no complications, such as overlying or underlying goaf in close proximity, it is proposed to advance the boring-place any distance up to 5 yards each day : the first front hole must be bored not less than 10 yards in order to allow of 5 yards of covering-hole at the end of the day. The necessary flank holes to be bored at the same time on both sides of the place will be three, bored from the extreme right and left corners at angles respectively of 3½, 14½, and 24¾ degrees with the direction of the narrow place, and in length respectively of 30, 31, and 45 feet. These flank holes will be subsequently reproduced every 5 yards. This is probably the smallest amount of boring that will cover with reasonable security the advance of the place against danger within a 5-yard line both of front and flanks.

The suggestion which may appear to be contained in the above lengths of flank holes, that 5 yards is sufficient cover even under normal conditions, must not be accepted for a moment. The figures merely indicate the system of boring to be followed. And although Section 68 might be taken to suggest that what is sufficient cover in front is equally sufficient on the flanks, the greater danger is to be apprehended from the latter quarter when approaching old workings about which little or nothing is known.

There is, I believe, a strong feeling in some quarters that the length of cover of the front hole should be considerably greater than the specified minimum of 5 yards. With the above arrangement of holes 5 yards is probably adequate when conditions are not abnormal. It is probable that the intervening barrier of 5 yards of coal would be ample under normal conditions to resist any pressure likely to be encountered in the coal-mines in this country, acting upon a newly-driven place only 6 or 8 feet in width. There can, however, be no objection to the extension of this cover to (say) 7½ or 10 yards, as the extra weight of the rods involved is negligible, and the ultimate total length of front hole bored is, of course, the same. There is, in fact, strong argument for the would-be economist in favour of a long front hole, quite apart from considerations of additional safety, in that even 6 yards may indicate the presence of old workings where 5 yards has failed to do so, thereby preventing the necessity to bore an additional 200 feet or so of flank holes.

The case of the flank holes is different. Here we have a "face" of indefinite width, namely, the side of the boring-place, separated possibly from an old goaf area by a barrier of no more than 5 yards of solid coal. It is evident that some better protection is advisable. The above arrangement of boreholes allows of a reasonably satisfactory solution of this problem by the extension of each alternate outer hole to any desired length. A hole 78 feet in length would give 10 yards of cover. By this means protection is afforded against goaf edges, whilst projecting places down to a width of 6 feet are still guarded against by the 5-yard cover.

A point which should not be lost sight of in conforming to the requirements of the Coal Mines Act is that from the actual commencement of the 5-foot place the safety area must be instituted and maintained. Obviously a front hole is put on before the narrow place is commenced, and the ground ahead is thereby covered. If the flank holes are set away only at the start of the narrow place, the first 5-yard length remains unprotected on each flank. In order to conform strictly with the assumed intention of the section, outer flank holes must be set away in the face of an imaginary 8-foot place 13 yards before narrow work is actually commenced, unless narrow work is commenced shortly before reaching the 40-yard exploratory or safety zone.

Procedure to be Adopted on Encountering a Fault. — It is assumed that (1) An unknown pressure of water may be encountered. (2) Burnside's improved hydro-safety boring apparatus is in use. (3) One front hole is maintained at least 7½ yards in advance of the face, and three flank holes on each side.

A supposed fault is encountered by the front borehole. The word "supposed" is added deliberately. No greater need exists for the principle of taking nothing for granted than in boring against old workings. The fact that the bore-rods have encountered some substance other than coal should not lead to the conclusion that a fault lies in their path until this fact has been definitely proved. The centre hole may have run into the strata above or below the seam, or into an existing "band," a local "roll," or a stone "facing." An effort should therefore be made to bore through the obstruction, and, if this fails, additional front holes should be set away from different points in the face to prove its presence across the full extent of the face.

Sufficient data having been obtained to determine the presence of a fault, it becomes necessary to ascertain its position and size. The angle at which the fault cuts the direction of advance of the narrow place may be easily ascertained by extending one of the three flank holes until it meets the fault, and making a simple trigonometrical calculation. The "hade" may be determined in the same manner with the aid of a rising front borehole. If this latter borehole should meet the fault at such distance as to prove by calculation that the point of its contact with the fault overhangs the point of contact of the original centre hole, there is then reasonable evidence that the fault is either a dip or, less probably, a reverse fault. For further confirmation of the information already obtained, a dipping hole may be set away in the floor of the place. If the information obtained from this hole confirms the previous assumption that the fault is either a dip or a reverse, additional dipping holes should be set away at successive distances from the face of the working-place until the seam has been proved or the limit of boring reached without result, in which latter case additional top rising holes should be bored on the same system in order to eliminate any possibility of error as to the type of fault, the possibility of a reverse fault being constantly borne in mind.

In the event of a rise fault being encountered, the above process is, necessarily, reversed. In the majority of cases it will probably be found advantageous to get as much information as possible in the first instance from rising holes, as these are more easily bored.

If the limit of boring should be reached without proving the seam, nothing further can be done from the face of this narrow place. There are then two alternatives : either to abandon this place and drive another similar place from the main workings, boring as before, and repeating this process until the seam has been proved; or to retreat from the face of the narrow place to a convenient point from which a drift may be driven up or down as the circumstances require, and out of which boreholes may be carried to a greater height or depth as the case may be.

When boring places are abandoned, the front hole, and at least the last series of flank holes, should be securely plugged, and a thoroughly efficient dam built across the place, the position of this dam with regard to the face of the place being dependent upon circumstances, close proximity to the face not necessarily being the best.


* From Paper on "Boring Against Workings likely to contain an Accumulation of Water or other Liquid Matter, and a Method of Negotiating a Fault." Prepared for Presentation at the April Meeting of The North of England Institute of Mining and Mechanical Engineers.


Names mentioned in this article

 

 Name  Age  Occupation  Notes 
Leeds, Charles Herbert      Whos Who Page


 

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 28 Nov 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print