Logo Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Main Document Archive
Newspaper Articles
Articles by date
Articles by colliery
Personal name index
Local Record Extracts
D.M.A. Document Archive
Transactions of I.M.E.
Miners' Welfare
N.C.B. Archive
The Colliery Engineer
The Colliery Guardian
Mine & Quarry Engineering
Mining Journal
The Science and Art of Mining
Coal Magazine
Coal News
Coke and Gas
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious


 Newspaper Articles Index Newspaper Articles 

9th March 1929, Page: 257, Column: 1

Rope Stresses

On page 247 in No. 16, we gave the conclusions arrived at by Messrs. Dixon, Hogan and Robertson in the Safety in Mines Research Board Paper No. 50, on "The deterioration of colliery winding ropes in service." Some further excerpts from the Paper are appended :—

Ropes in service may be subjected to forces which bend, stretch and twist the rope. In a solid bar in a testing machine the applied force is balanced by a simple stress corresponding to the type of force, and the material is strained in accordance with the intensity and the type of induced stress. In wire ropes, however, the relations between the force applied to the rope and the stress and strain induced in the rope are much more complex. When a particular kind of force is applied to the rope the constituent wires are stressed, but the stress induced in the individual wires does not bear a simple relation to the force applied to the rope or to the strain produced in the rope. A wire rope is a structure ; it does not respond to bending, tension or torsion like a solid bar or like a collection of parallel wires. In considering the effect on the constituent wires of the load applied to the rope it is necessary to take account of the construction of the rope. This construction affects the relation of the type of stress imposed on the wires to that imposed on the rope ; it also affects the distribution ol the stress among the wires.

Repeated Stressing. — The forces applied to wire ropes in service are mainly kinetic ; they are repeatedly applied and fluctuate considerably during each wind. The repeated application of the kinetic stress is an important factor influencing the deterioration of wire ropes.

It is necessary to state that the conspicuous characteristic of repeated stressing is the almost complete absence of any alteration in the material until fracture begins. Under repeated stressing fracture begins as a small transverse crack, which, once started, rapidly becomes a break. The metal therefore breaks without distortion and the fractured end is usually square or conchoidal. This fracture resembles the breaks produced when brittle material is tested in static tension, and this is the type of fracture usually found in wire ropes which have been broken by repeated stress. The square end simply shows that the wire has been broken by a number of applications of stress.

The Resistance of Wire to Repeated Stressing. — The resistance of cold-drawn wire to repeated stressing has not been extensively investigated. It is generally believed, however, that the load which may safely be applied a large number of times is, in the ease of wire, a smaller proportion of the maximum strength than in the case of ordinary steel bar. There is no definite experimental evidence to show that one type of wire will withstand the repeated application of a greater proportion of its maximum stress than another. When the complex conditions under which a wire is stressed in a winding rope are taken into account, it may readily be supposed that its behaviour in service is not directly related to its maximum strength in static tension.

The Bending of Ropes. — The bending of a rope over pulley and drum causes deterioration of the rope, but this deterioration is produced by the relative movement between the strand and wires, rather than the stress induced in the wires by bending.

Movement of the strands and wires relatively to each other causes wear at the points of contact, and this wear is more severe the greater the amount of relative movement. As the amount of relative movement depends on the diameter of the pulley and drum, these dimensions are an important part of the service conditions. As a rule the internal wear produced by running on the pulley and drum is most severe at the points where the strands are in contact, but severe wear may also occur between the outer and inner wires of a strand, and, in ropes with two layers of strands, severe wear may occur between the layers. As this wear is caused by friction between the wires and strands, it is obvious that it takes place to a greater or lesser extent according to the state of the lubrication in the rope.

Bearing. — Owing to the tensile stress in the rope, the segments in contact with the pulley tread are subjected to side compression or bearing stress. The conditions at the drum are similar to those at the pulley, and severe wear may be produced at those points of the rope which slip on the drum at the beginning of an upward wind, or when an unloaded cage is being lowered. The bearing pressure is more severe and the external wear more rapid, the smaller the diameter of the pulley and drum.

Tension. — The most important stresses imposed on ropes in service are those which result from lifting and lowering the cage. In general these are the stresses which break the ropes, and as failure may occur when the rope is working with a nominal factor of safety of 10 and before the strength of the rope has been reduced by corrosion or wear, it is necessary to consider how this is brought about.

The discrepancy between the service conditions and those assumed in calculating the factor of safety arises as follows :— (a) During winding the rope is subjected to kinetic shock stresses in addition to the dead load stress. These kinetic stresses may be very severe. (b) Owing to the complex structure of stranded winding ropes, the distribution of stress in a rope is different from what it would be in a steel bar, and wires in the same cross-section do not necessarily carry equal proportions of stress, (c) The resistance of individual wires to repeated application of stress is less than their resistance to static tensile stress.

The Kinetic Stresses. — The maximum tensile force on a winding-rope is the sum of the dead load and of the kinetic shock forces, and consequently depends on the winding conditions as a whole and not on the dead load only. The kinetic shock forces arise through the acceleration and retardation of the cages, and through irregularities in the winding, whether caused by starting with slack rope, an ill-adjusted engine, or bad alignment of the guides, if rigid guides are used. The magnitude of these forces depends among other things on the depth of the shaft, the amount of slack allowed when lifting the cage, the presence or absence of a balance rope or shock absorber, the elasticity of the rope, the type of winding engine, and the temperament of the engine driver.

In short ropes the effect of the kinetic stresses predominates, and the total stress is greatest at the capping ; in long ropes, owing to the reduced intensity of the kinetic shocks and the greater weight of rope, the total stress is greatest at the pulley.

The Stress in the Wires. — When the tensile force is applied to a rope, complex stresses are induced in the constituent wires, which, as a result of their helical form, are subjected to shear and torsion in addition to tensile stress.

The Distribution of Stress in a Rope. — In considering the effect, on the constituent wires, of the load applied to the rope, it is necessary to take account of the construction of the rope. Because the rope is constructed of wire, it behaves to a certain extent like a collection of wires, but owing to the way in which the wires are spun together and to the friction between them, it also behaves in some respects like a steel bar.

Because of the characteristic behaviour of a wire rope under stress, its resistance to repeatedly applied stress is considerably less than that of a solid bar which has the same strength in static tension. The properties of a wire rope do not depend entirely on the properties of the wire from which it is made ; they are also dependent on the lay of the rope, the relative strengths, diameters and lengths of the wires composing it, and, in fact, on every feature of its construction. It is probable that two ropes made from the same wire but of different construction, would give very different results in service.


Names mentioned in this article

 

 Name  Age  Occupation  Notes 
Dixon, S. M.    S.M.R.B.  
Hogan, M. A.    S.M.R.B.  
Robertson, J. M.    S.M.R.B.  



Related Articles

Pub.
Date
Article (Newspaper)
23 Feb 1929  Winding Rope Failures (The Science and Art of Mining)
09 Mar 1929  Rope Stresses (The Science and Art of Mining)

 

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 28 Nov 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print