26th January 1929, Page: 212, Column: 2
Mine Temperatures
Discussing "Methods of Reducing Temperature in Deep Mining Work" at a
meeting of the Institution of Civil Engineers, Mr. James Whitehouse,
M.Sc., said increased ventilation would be first adopted, but there were
limitations to this owing to shaft capacities. The elimination of moisture was
of the highest importance. Consequently, shafts from which moisture could be
excluded as far as possible should be adopted. Timbered shafts were not
suitable for the working of deep deposits. The general cooling at the surface
of ventilating air was a most convenient way of improving conditions, beyond
the methods already referred to. General cooling underground had a disadvantage
in that the extracted heat must be sent out of the mine either in the water
pumped or in the upcast air. The quantity of water might be insufficient for
this purpose, and it was often inconvenient to transfer the heat to the upcast
shaft. The cooling by circulation of cold water introduced the practical
difficulties of high pressures and power costs which render such a system
unattractive. Local cooling with small plants offered distinct advantages,
since over short distances less heat was taken up and a better effect was
obtained at the working points. The disposal of the heat extracted, however,
remained a difficult problem. Cooling by compressed air expanded in nozzles was
uneconomical. There were similar objections to the use of compressed air
expanded in an air engine doing external work. The combination of a compressor,
an electric motor, and an air motor, mounted on one shaft, had been considered
for local cooling and conditioning. The use of liquid air for cooling purposes
was uneconomical. The use of ice sent from the surface was being more generally
used for local cooling. By this method a reduction of 3 degrees could be
obtained at advanced points. The use of silica gel had been suggested for
drying mine air, but the rise of temperature which took place made this method
unattractive.
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Whitehouse, James | | Civil Engineer | |