|
15th December 1928, Page: 161, Column: 1 Factors In Coal ProductionAt the recent meeting of the Institute of Fuel a paper was submitted by Mr. George Raw, B.Sc, on "The Economics of Coal Production." He said that the introduction of modern mechanical methods of mining is frequently cited as the solution of the British mining engineer's problem. The increased mechanisation of the mines is desirable and is steadily proceeding, but for two principal reasons it cannot be accomplished at once. Time is necessary to train workmen with life-long experience of older methods, in the newer mechanical conditions, while the arrangements of the workings below ground in the older collieries do not, in the majority of cases, permit of more than a gradual increase of mechanisation. The coal trade does not possess the necessary financial resources, in a great many cases, for carrying out the mechanisation and modernisation which is necessary. The British coal trade, nevertheless, with characteristic determination, is adapting itself to the new conditions, while its mining practice is still in the van of progress. The transition from hand hewing of coal to machine winning has been taking place comparatively slowly but is now rapidly increasing. Up to the end of the war the percentage of coal won by machines in Great Britain increased regularly up to 12 per cent. From 1919 to 1927 the rate of increase became greater ; in the latter year 23.3 per cent. of the coal being produced by machines. The high percentages obtaining in Scotland and Northumberland are probably mostly due to the thinness and hardness of the seams worked. Coal face conveying, apart from coal-cutting, has been considerably developed and improved in the past decade, the shaker trough type and the continuous belt probably dividing the field between them, according to the varying local conditions. Progress has been made at Usworth Colliery in the county of Durham in the direction of the development of a new type of intermittent tub conveyor which is giving very satisfactory results. It is probable that the future will see not less than four different types of conveyors in extensive use according to different local conditions :— (1) Continuous belt conveyor. (2) Shaker trough conveyor. (3) Intermittent tub type conveyor. (4) A conveyor loader or a type of conveyor which both loads and conveys the coal, thus avoiding the necessity of manual filling. The old system of taking haulage tubs to the coal face so that the face conveyors might discharge into them there is rapidly passing. The introduction of a loading station with some suitable type of loader is becoming more and more efficient and indeed essential. Mr. Raw made further reference to the loader, to the efficiency of the electric winding engine as an economical consumer of power, also pointing out that of the power used below ground modern legislation and practice confines the mining engineer to that of electricity and compressed air, the steady growth of electrical power being commented upon. He then proceeded to say : A factor to be borne in mind is that with whatever zest the underground employee may work, he will never be able to fully occupy the underground period of his shift, by reason of the dead time that is accounted for in travelling to and from his work below ground and by the proportion of unavoidable interruptions that must occur in the most efficiently managed of collieries. The economising of the time spent below ground by the miner by such means as in conveying him to and from the shaft to his working district by special haulage arrangements has received considerable attention of recent years where such measures are practicable. The newer collieries, with their new underground arrangements of roadways, are more favourably circumstanced for effecting this transport than are the older collieries with their more antiquated arrangements of roadways. As a means for reducing physical fatigue this underground transport of the workmen is of much more practical value than the Continental suggestion of enforced rest periods. The British mining engineer views such proposals as the latter with not a little scepticism. The present generation is witnessing the passing of this stalwart craftsman, who, with a knowledge bordering on intuition, was able to avail himself of weaknesses in the coal structure, thus obtaining for himself the maximum result for his effort. In his place is coming to an increasing extent the machine, and with it the difficult phase of transition from one craft to another. Modern mining methods call for the outstanding qualities which have distinguished the British miner in the past, but it calls also for a high degree of intelligence, training, concentration and co-operation to secure the results which alone can win back for Britain her place in the sun of the world coal trade. Give us the British mining engineer. Give us that excellent type of Britisher who has been too often overlooked, the loyal, capable, resourceful colliery official. Give us the British miner, with his excellent qualities and his fighting spirit too often exercised in the past in the wrong direction. Grant us deliverance from the politicians of all parties and the British mining industry will deliver the goods.
|
|||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 28 Nov 2022
|
Search |
|
|||