Logo Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Main Document Archive
Newspaper Articles
Articles by date
Articles by colliery
Personal name index
Local Record Extracts
D.M.A. Document Archive
Transactions of I.M.E.
Miners' Welfare
N.C.B. Archive
The Colliery Engineer
The Colliery Guardian
Mine & Quarry Engineering
Mining Journal
The Science and Art of Mining
Coal Magazine
Coal News
Coke and Gas
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious


 Newspaper Articles Index Newspaper Articles 

1st December 1928, Page: 155, Column: 2

Lecture On Explosives

The mining students of the Manchester College of Technology have had before them Dr. William Cullen, who took for his subject "The Differences between Permitted Explosives and Non-permitted Explosives." He said that in comparison with the explosives of the nitro-glycerine class, explosives based on nitrate of ammonia were somewhat insensitive. Therefore greater care had to be taken in regard to the placing of the cartridge. If there was more than one, the cartridges must be in physical contact with one another when a hole was being charged up. Intervening dust, or foreign matter, or even an air gap might lead to a partial detonation. Nearly all explosives produced carbon monoxide, and some of them produced other combustible gases. This lead to secondary reactions after the detonation had taken place. It could be easily understood that if a large amount of carbon monoxide was produced, this might lead to further combustion and to more carbon dioxide when it came in contact with the air, as it must inevitably do. Some people asserted that the addition of cooling agents had gone too far, and that power had been sacrificed to temperature reduction, but it was difficult to see what other course was open to makers, for the range of coolers which were not too expensive was extremely limited. However, it was scarcely likely that this artificial cooling would go any further along the present lines. Possibly the most important point of all was that certain explosives, when used without tamping or with dry tamping, gave a visible flame, but when damp clay tamping was employed, the flame was completely quenched.


Names mentioned in this article

 

 Name  Age  Occupation  Notes 
Cullen, William, Dr.      


 

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 28 Nov 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print