17th November 1928, Page: 133, Column: 2
Corrosion-resisting Steel
It would appear from a paper by Mr. Frank R. Palmer before a meeting of
the American Society for Steel Treating, that a novel application of zirconium
sulphide has solved a difficult problem. In the machining and grinding of some
of the high-chromium steels, trouble has been experienced ; the chips often
adhere to the cutting tool, with similar difficulties in grinding. Taking as a
basis the known effect of fairly high percentages of sulphur and phosphorus on
the machinability of certain steels, it was ascertained that the presence of
0.40 per cent. of zirconium sulphide in the chromium alloys had the same effect
on the machinability and the gringing properties as 0.30 per cent. sulphur. The
alloy steels, however, were easily worked with the presence of the zirconium
sulphide, whereas they could not be with a high-sulphur content. Thus, by
introducing the sulphide of zirconium, the machining and grinding properties of
rustless iron were greatly improved. The author also announced that the
presence of this sulphide did not impair the resistance to corrosion nor to
scaling at high temperatures, and that the alloys could be forged or rolled
under 2,100°Fah. The sulphide did, however, decrease ductility and lower
the Izol value. Microscopically it did not dissolve in the ferrite, but was
distributed as nuclei. — The Iron Age.
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Palmer, Frank R. | | | |