Logo Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Main Document Archive
Newspaper Articles
Articles by date
Articles by colliery
Personal name index
Local Record Extracts
D.M.A. Document Archive
Transactions of I.M.E.
Miners' Welfare
N.C.B. Archive
The Colliery Engineer
The Colliery Guardian
Mine & Quarry Engineering
Mining Journal
The Science and Art of Mining
Coal Magazine
Coal News
Coke and Gas
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious


 Newspaper Articles Index Newspaper Articles 

3rd November 1928, Page: 117, Column: 1

Sizing Of Coal For Briquetting

By J. R. Homer, B.Sc.

From paper prepared for reading at the 39th Annual General Meeting of the Institution of Mining Engineers. Mr. Homer is on the Mining Department Staff at the University of Birmingham

The screening, cleaning, and washing of small coal is now receiving the serious attention of the British mining industry, and the numerous articles constantly appearing in various technical journals are but proof of this. An increased production in this country of clean fine coal should focus greater attention upon briquetting as an industry than has been the case in the past. No other British coalfield has followed, except on a very small scale, the example of South Wales, where the manufacture of briquettes has been an important branch of the industry for the last fifty years. I have recently had the opportunity of undertaking such experimental work in the Coal Treatment Laboratory of Birmingham University, wherein Professor K. Neville Moss, anticipating the necessity for investigations on briquetting, accordingly incorporated suitable plant in the lay-out of the laboratory.

Comparatively few coals can be briquetted in their natural state as received from the mine or screens without subsequent washing and crushing. A great deal of fine coal which could probably be briquetted without any further crushing is wasted annually owing to its high ash-content and to the fact that no satisfactory method of cleaning has hitherto been available. Crushing or sizing of the coal so that the most satisfactory briquette can be produced with the least possible quantity of binder is an important economic problem for briquette manufacturers. It is well known that comparatively fine crushing gives a close textured briquette, very resistant to weathering, and with a good appearance ; but that if the crushing is too fine, a large increase in the amount of binder will be required. On the other hand, the use of coarser material, which requires less binder, may lead to the production of weak briquettes owing to unfilled voids.

My preliminary investigations were carried out on a number of coals that were under investigation in the laboratory. These were all of a similar nature, and consisted of hard bituminous coals, generally possessing slight caking properties. Coals which are to be briquetted are always cleaned on the dry or wet-cleaning plants with which the Coal Treatment Laboratory is equipped, the aim of such cleaning being to produce briquettes with an ash-content of less than 10 per cent. Drying is always carried out in order to remove any surface moisture, but the facilities at present available do not permit of this being done in a thorough enough manner to remove much of the inherent moisture which may be present.

The briquetting press installed in the Coal Treatment Laboratory was constructed by Messrs. Yeadon, Son, and Company, of Leeds, and is of the single compression type, with horizontal revolving mould-plate and vertical compressing piston. The press is designed to make briquettes measuring 4 by 4 by 3 inches and weighing approximately 2 pounds. The pressure applied can be varied up to a maximum of 2 tons per square inch by adjustment of the connecting-rod to the compressing lever. The actual pressure exerted on each briquette is read off on a gauge. Steam for the mixing chamber is supplied at a pressure of 50 pounds per square inch, and a water-trap and super-heater are employed to ensure its being dried prior to coming into contact with the briquetting mixture. The temperature of the steam as it enters the mixing-chamber is usually from 180° to 190° Cent.

In order to ensure that each test is carried out under the same conditions, so that the results may be strictly comparable, the following procedure is adopted: (a) The plant is thoroughly warmed up before briquetting is commenced. (b) The same heat-treatment is given to equal amounts of mixture, (c) Briquettes are rejected unless the mixture is being maintained at a constant level in the cooling-pan, thus ensuring equal filling of the moulds before every compression stroke. The correct amount of heat-treatment and adjustment for the required pressure is determined by preliminary trials. The weight of coal and binder employed for each test is usually 100 pounds. Crushing was carried out in a Yeadon disintegrator, and the size of the coal to be used in each experiment was varied by passing it through a sieve of different mesh, and also by recirculating the crushed coal.

Tables prepared as a result of the investigations show that there is not, after all, a great disparity between the results with practically all coal passing through a 1/8-inch mesh and those in which 20 to 25 per cent. of ¼ to 1/8-inch coal was present. For economic and practical purposes it is desirable to have such a percentage of ¼ to 1/8-inch coal present, while the grading of the "fines" should approximate 50 per cent. of 1/32 to 1/64-inch and 50 per cent. of 1/64 to 0-inch coal.

Using 8 per cent. of pitch, with a fairly even grading of the ¼ to 1/32-inch particles, 30 to 40 per cent. of 1/32 to 0-inch should be present for the strongest and most resistant briquettes.

While with a 10-per-cent. pitch there is a sufficient binder present to give satisfactory results over a wide range of sieve analyses, the best results were usually obtained with the same grading as gave the best for 8 per cent. If a very close-textured briquette is required, it can now be made with very little reduction in strength.

Briquetting with no "fines" is not to be recommended, owing to the rough surface, high porosity, and low density which results. For some purposes, however, a coarse mixture might with advantage be used, since the object of briquetting is not always to make the best possible briquette but to produce on an economic basis the one most suited to the requirements of the market. When 6 per cent. of pitch was employed, the strongest briquette was produced when no "fines" were present.

Appearance, porosity, and density can, of course, be improved by increased pressures.


Names mentioned in this article

 

 Name  Age  Occupation  Notes 
Homer, J. R.      
Moss, Kenneth Neville, Prof.      Whos Who Page


 

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 28 Nov 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print