6th October 1928, Page: 96, Column: 1
Block Signals for Mine Haulage
Block signals are not confined to railroads but are used in the mining industry
to assure safety in operation of underground mine haulage systems. The mining
system is described in the August "Mining Congress Journal" by
C. E. Watts, mechanical engineer of the Berwind-White Coal Mining Company of
Windber, Pa. The signal system of this company functions satisfactorily and has
proved a valuable feature in protection against collisions, in increasing the
speed of mine trains, and in controlling peak loads on the haulage system.
"Safety control and speed and efficiency of train movements is a paramount
feature of a mine haulage system which embraces a long line of double track
with its necessary crossover connections and side tracks," says Mr.
Watts. "Constant darkness prevails except for incandescent lights
located at infrequent intervals and the beam from the locomotive headlight
which seldom lights the track for any considerable distance. The presence of
dust and the ventilation current make visibility poor and uncertain. To operate
trains under such conditions requires the best protective devices for
indicating switch locations and train positions and movements. In some systems
switch positions are indicated by lamps similar to those used on railroads.
They are operated by the mine train crew under direct verbal or telephone
instructions from the train dispatcher. Train movements are determined by
verbal instructions by the dispatcher to the crews when they start into the
mine and also by telephone through stations at convenient points
underground."
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Watts, C. E. | | Mechanical Engineer | |