22nd September 1928, Page: 65, Column: 2
Preparing Coal For Market
In a discussion of practical operating problems of the coal mining industry in
the August "Mining Congress Journal," H. D. Smith, assistant
to the president of the Ashland Coal and Coke Company of Bluefield, W. Va.,
refers to the operation of its latest types of tipple and washery used at its
mine. The purpose of installing the equipment was to better prepare different
grades of coal from a sizing and cleaning standpoint. The combined sizing and
cleaning plant is of steel and concrete construction and handles and cleans
five sizes of coal. The coal is brought in mine cars in trips, averaging 40
cars, to the trip puller located in a steel constructed head house and shed and
the cars are dumped at the rate of 350 tons per hour. The plant equipment keeps
snow and ice from clogging the machinery and also protects the workmen from the
elements. The coal after dumping flows into a hopper of 7 tons capacity under
which a conveyor feeds the run of mine coal at the rate of 350 tons per hour
into another conveyor 150 feet long which brings the coal down the hillside to
a proper height for discharge to the main shaker screens. The main shaker
screen is in two sections for balanced operation. The top section has two
screening decks, the top section receiving 2½-inch size coal and the lower
section receiving lump and egg sizes. The coal is washed in a concrete tank
with circulating water. The company maintains a laboratory and makes daily
tests to check the performance of the washer and the condition of the coal as
shipped. "The results from the plant have been very satisfactory and have
insured a product well prepared for the most exacting demands of the
market," says Mr. Smith.
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Smith, H. D. | | | |