8th September 1928, Page: 59, Column: 2
A Galvanising Feat
Mr. F. W. Young, of Filitration Engineers Inc., Newark U.S.A., in a
recent issue of "Industrial and Engineering Chemistry," describes an
unusual achievement in galvanising. His company recently concluded a contract
one item in which was a steel dryer drum, 8ft. 6in. dia. by 10ft. 6in. long,
which was to be electrolytically galvanised, the zinc coating to be
one-sixty-fourth of an inch thick. To effect this the drum was mounted in
bearings fitted to a shallow wood tank in such a way as to allow about
one-fifth of its surface to be submerged therein. The drum was then rotated at
a speed slow enough to allow the galvanising solution to deposit, and yet fast
enough to prevent oxidation or drying of the surface exposed to the air. The
surface was brushed with steel brushes every 15 minutes for the first 24 hours
and every half-hour thereafter. The operation lasted 100 hours continuously. At
the end of that period the solution was pumped out of the tank while the drum
was kept rotating and was immediately washed with water and steam, then quickly
wiped and dried, and finally the finished surface was wire-brushed. Careful
examination revealed a satisfactory result.
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Young, F. W. | | | |