11th August 1928, Page: 28, Column: 1
Components Of Bituminous Coal
One of the papers presented at the June meeting of the North
of England Institute of Mining and Mechanical Engineers by
Dr. John G. Kellett, was on The Physical Constitution of
Bituminous Coal and Coal Seams." He explained that bituminous
coal of Carboniferous age, when examined macroscopically, is
seen to consist of three components, namely (1) Fusain, (2)
vitrain, and (3) durain.
Fusain is the sooty, greyish-black, fibrous material which so
readily soils the fingers. When a vertical face of a coal-seam is
examined, very little fusain as a rule is detectable. In one seam
examined, only one-third of the total fusain was so detected. The
intense pressure to which the coal has been subjected has compressed
the fusain, and on the vertical face the narrow lenses of
this material do not exhibit the characteristic fibrous, powdery
form seen when examined on bedding-plane surfaces. Usually
the material must be scratched with a knife in order to distinguish
it from durain. Large lens-shaped pieces of fusain, up to a foot
or more in length and from 1 inch to 2 inches in thickness, have
been seen in coal-seams. Such dimensions are rare. When
examined on the bedding-plane surface, fusain generally appears
to be made up of a conglomeration of pieces with square-cut ends.
Vitrain is shining black, with an almost vitreous lustre, both
on vertical faces and bedding-plane surfaces, and is very brittle
often breaking into cubes. On bedding-plane surfaces, vitrain
has a very irregular and uneven surface, and shows a decided
conchoidal fracture. On vertical faces of coal, individual pieces
of vitrain are seen to lie parallel, or almost so, to the bedding,
and if carefully traced are seen to be lens-shaped and of variable
length. Frequently individual pieces are seen to thicken and
thin or to split up into two or more arms, or to be elliptical in
shape. The width of an individual piece of vitrain may lie so
small as to be inappreciable to the unaided eye on the vertical
face of the coal. Such tiny particles, however, can be detected
if the coal is split parallel to the bedding. These tiny particles
then appear as bright films of shining black, with typical irregularity
of sin-face and vitreous lustre on the bedding-plane surface. There
is a marked difference in the amount of cleating suffered by vitrain
as compared with durain and fusain. Vitrain is usually highly
cleated, while adjacent durain and fusain are wholly or almost
uncleated. This is often well illustrated on bedding-planes.
Durain is dull, hard, practically uncleated, greyish-black in
colour, and whether examined on a vertical face or on a bedding-plane
surface, and no matter how viewed, it is entirely lustreless.
The vertical fracture is typically hackly the dull-grey lustreless,
irregular vertical face therefore contracts strongly with the smooth,
clean, bright shining vertical fracture face of vitrain. On a
bedding-plane surface, however, durain usually gives a more or
less smooth, fiat surface, which is often rather slate-like. This
again contrasts strongly with the bedding-plane surface of vitrain.
Sometimes the bedding-plane surface of durain is quite irregular,
but is never so uneven as that of vitrain.
The Macroscopic Character of the Complex Bands of Coal.
Clarains. — In a seam of ordinary bituminous coal, fusain, vitrain,
and durain may each occur in the form of distinct and separate
lenticles that can be recorded in the vertical section of the seam.
Much of the seam, on the contrary, consists of fine intercalations
of these constituents in which the individual lenticles are so minute
that a separate record of each is practically impossible. In many
cases the unaided eye cannot, or can only barely, distinguish the
separate components. A large proportion of the more or less
"bright" coal is made up of such minutely mixed material, so
that the mass has a microscopic or submicroscopic laminated
structure, often apparent to the naked eye as a silky sheen. This
type of coal constitutes the bulk of what is known as clarain.
The appearance of such complex bands varies in relation to the
following circumstances :— ( 1) The proportions in which the
constituents are present. (2) The size of the individual component
fragments. (3) The plane in which the band is fractured. (4) The
angle of illumination of the surface, and the angle at which it is
viewed. In any complex band of coal, the greater the amount
of vitrain, the brighter the band as a whole will appear. Every
graduation is found, therefore, from the brilliant bands of pure
vitrain to the completely dull bands of pure durain or fusain.
The lustre of the complex bands also varies with the angle at
which the vertical face of the coal is viewed. On bedding-plane
fractures these complex bands are usually resolved readily into
their components. A lenticle of fusain or vitrain no more than
0.1 millimetre in thickness may often have an area of 1 square
centimetre, and a considerable part of this area is likely to be
exposed on a bedding-plane fracture. Relatively considerable
areas of durain or fusain are likewise exposed. In this way a band
which on the vertical fracture can be recognised as complex only
with difficulty, if at all, is readily seen in the horizontal fracture
to be a conglomerate of different constituents.
The Microscopic Constituents of Coal. — The constituents of coal
recognised under the microscope in thin section are (1)
Anthraxylon. (2) Residuum. (3) Microspore and macrospore exines.
(4) Resins. (5) Rodlets. (6) Cuticles. (7) Fusain.
Anthraxylon is reddish-brown in colour, and varies in shade
according to the thickness of the section. It represents
continuous pieces of wood or cortex in which the infilling material of
the cell-cavities is in some cases a light yellowish-red colour,
while the walls are a darker reddish-brown; in other cases the
cell-walls are slightly lighter in colour than the infilling material
of the cell cavities. The size of individual pieces of anthraxylon
varies greatly. Rarely is one piece more than 1 centimetre wide.
Lengthwise the pieces may be the full width of the thin section,
appearing as bands of constant width, or they may be lens-shaped
or branching.
Residuum is the name given by Dr. Kellett to the very dense
blackish to deep reddish-brown material which is without defined
organic structure, and appears as a somewhat granular interstitual
matter between individual microscopic ingredients in certain coals.
He says it would seem that residuum and anthraxylon have
both originated from the same type of plant material. In the
case of residuum this plant-material has reached a more advanced
stage in its physical and chemical disintegration before incorporation
in the coal-forming plant debris than that which has
resulted in anthraxylon. It is sometimes difficult in some coals
to draw the line between small fragments of anthraxylon and
residuum.
Rodlets are occasionally conspicuous ingredients of coal. They
are black, except in very thin sections, when a reddish-brown
tinge is shown. In section they are somewhat rounded, oval,
or polygonal, having occasionally a decided octagonal outline.
They always arch up the coal above and below them.
Fusain is typically black and opaque even in the thinnest sections,
except in certain cases in which it is reddish-brown in colour.
A graphical representation of the microscopic constitution of
a coal-seam shows that there is a distinct relationship between
the occurrence of the exine-resin-cuticle group and residuum.
An extensive occurrence of one is generally accompanied by an
extensive occurrence of the other. The distribution of these two
types of ingredient appears to have no relationship to that of either
fusain or anthraxylon. Again, a very definite relation exists
between the occurrence of fusain and of anthraxylon. They
are undoubtedly complementary, as shown by the fact that the
total of anthraxylon plus fusain is far more constant than the
percentage of either of these constituents alone.
The constant association of the exine-resin-cuticle group, with
residuum, justifies the recognition of mixtures of these as a definite
type of coal (i.e., durain), although the precise constitution of
different samples of durain is naturally liable to wide variation.
The complementary relation between anthraxylon and fusain
confirms the conclusion that they represent the same type of
vegetable material (i.e., wood or bark) in different states of
preservation.
Of the "four banded constituents," three are thus readily
correlated with the microscopic constituents :— Vitrain
represents
bands or lenticles of anthraxylon of sufficient size to be separately
distinguishable by eye. Fusain represents bands or lenticles of
that substance similarly distinguishable. Durain is a microscopically
complex mass of the more minute fragments of all types,
with normally a very small proportion of anthraxylon. On the
contrary, there is no microscopically distinguishable entity
corresponding to clarain. It corresponds merely to mixtures of
the constituents of the other three types in almost every possible
proportion.
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Kellett, John G., Dr. | | | |